Kenwood Catalog | Kenwood Price List
 

<< Kenwood Oscilloscopes

Kenwood CS-5400 Series Oscilloscopes
Models CS-5400, CS-5405, CS-5450, CS-5455

• All position knobs and controls are provided on the front panel.
• A High-sensitivity X-Y function is convenient for the measurement of phase differences between two input signals.
• A Trace Rotation function allows an easy correction of the inclination of the trace line due to earth magnetism.
• Line Synchronization is provided.
• A Trace Separation function shifts the B sweep waveform upward or downward by 4 div. from A sweep waveform.
• The waveform to which the brightness modulation is applied can also be observed.
• Added or subtracted waveforms using ADD and CH2 INV functions can also be observed.
• Scale illumination convenient for taking photographs or observation in dark areas is provided.
• CRT scale also provides 0, 10, 90 and 100% indications convenient for measurement of rising time, etc.
• A 10-times sweep waveform magnification function (X10 MAG) is provided.

Kenwood CS-5400 Shown

Product Information
Datasheet	160 KB
Specifications	HTML
Ordering Info
PDF Help

The CS-5400 Series are 3-Channel oscilloscopes developed with concepts of high level design, high accuracy and easy operation.  The panel layout never diminishes the intuitive and high-speed response provides fatigue free operation even after long-hours of use.  These models incorporating readout function (with CS-5400/5470/5450) offer you parameter measurement and auto setup functions enabling to measure AC voltage (Vp-p), DC voltage, frequency and period.  All of these models are provided with full features including ±2% high-accuracy measurement, delay sweep function, automatic triggering and high intensity, high-resolution CRT.  The CS-5400 Series with high-performance will surely assist you in many kinds of field activities.

CS-5400/5470/5450 FEATURES

Parameter Auto Measurement Function

It is possible to measure the voltage, frequency and period automatically - just input the signal.  Especially for voltage measurement, measurement mode is automatically selected according to the input selector.  For example, when the AC input is selected, "Peak-to-Peak" voltage is automatically measured, and when the DC input is selected, DC voltage is measured automatically.

Auto Setup Function

By pressing the AUTO SET key, the voltage range and time range are selected automatically.

Cursor Measurement Function

The cursor measurement function allows a high accuracy measurement of signal values.  When the probes are used, its attenuation ratio can be converted automatically.  It is also possible to measure the voltage value and phase differences.  When the delay sweep is used, the delay time is also displayed, enabling accurate measurement results without any errors due to visual checks in conventional systems.

Peak to Peak Voltage Measurement

Parameter automatic measurement function enables automatic AC peak to peak voltage measurement up to 5MHz.

Variable Lock

ON/OFF the vertical and horizontal variable functions can be set when pressing the ALT/CHOP knob more than 1-second.  When OFF is selected, it becomes CAL level.  When the function is ON, it returns to prior value.

CS-5400 SERIES COMMON FEATURES

3-Channel 8-Trace Waveform Display

CS-5400 series enable the display of CH3 input in addition to CH1 and CH2.  These three input signals to CH1, CH2 and CH3 can be displayed at the same time as the main (A) sweep waveform.

Furthermore, an alternated delay sweep function displayed as the delayed (B) sweep waveforms of each signal.

High-Sensitivity Design with Vertical Axis of 1 mV/div

The vertical axis sensitivity can be varied continuously from 1 mV/div to 5 V/div using the 1-2-5 step attenuator.  The 1 mV/div position is very useful to measure low-level and complicated signals.  [Frequency response at 1 mV/div and 2 mV/div is DC to 20 MHz (-3 dB)].

Automatic Sync (FIX) Function

With this function, the synchronization level is automatically controlled by tracking the amplitude of the waveform to maintain the sync lock status.  This function eliminates annoying and complicated synchronization operations.

Ease Operate Panel Layout

The CS-5400, CS-5470 and CS-5450 used touch switches and LEDs. The CS-5405, CS-5475 and CS-5455 used push switches and lever switches for easy operation.

Delayed Sweep with Waveform Partial Magnification Capability

The main (A) sweep waveform in which the magnified section is brightened by intensity modulation and the delayed (B) sweep waveform which shows only the magnified section can be observed simultaneously.  This is a real alternate delayed sweep.

V Mode Sync for Stable Display of 3 Signals

Even when the CH1, CH2 and CH3 input signal frequencies are different, each signal can be synchronized securely and its waveform can be displayed stably.

High-Accuracy ±2% Design for More Precision Measurement

In order to obtain highly reliable measurement results, the vertical axis sensitivity and sweep time for the main circuit is maintained within ±2% precision.  Other specifications also guarantees the rated values (under temperature conditions of 10 to 35°C, humidity of 85% or less).

Built in Video Clamp Circuit for Easy Operation

Built in video clamp function which enables observation of the flame and line TV signals at the touch of a button, while high-stability synchronization is obtained without performing annoying synchronizing operations.

Square-Type 150 mm CRT with Self-Illuminated Light and Inside Scale (12 kV)

A large-sized, square, dome-mesh type CRT with accelerator is employed.  It features both high intensity and high resolution while providing accurate measurements without parallax view.  The auto focus circuit is also incorporated to display sharp waveforms at all times.

Maximum Sweep Rate of 5 ns/div (at x10 MAG)

The sweep rate can be varied continuously from 0.5 s/div to 50 ns/div.  The signal delay line is installed so that the rise of high-speed signals and high-frequency signals can be measured accurately.

Single Sweep for Observations of Single-Shot Channel

The single sweep function is powerful in measurement of single-shot or sudden channel.  Waveform photography using a camera is as easy as ordinary, visual observations.  It is easy not only for observations during normal visual inspections but also for camera shots of the waveforms.

Variable Hold-Off Allowing Observation of Waveforms with Complicated Cycle

Signals which are hard to be synchronized due to complicated repetition cycles, for example digital signals and video burst signals can be synchronized stably by varying the hold-time.

High-Accuracy Calibration Signals

A calibration signal output is provided to output the highly accurate frequency of ±0.1% and voltage accuracy of ±1%, enabling checking of the measurement precision at any required time.

CH1 Signal Output Connector

The CH1 signal output is obtained by branching the input signal in the middle of the signal line.  As this connector outputs the input signal at a rate of 50 mV/div, connecting a frequency counter makes it possible to measure the frequency of a very low signal while observing its waveform.

Wide Dynamic Range and Distortion-Free Accurate Waveform Display

Its wide dynamic range having greater margins assures the linearity of the waveforms displayed on the CRT, providing highly accurate waveform displays without any distortion up to the upper frequency limits.