Kenwood GP610D Adaptor for PA and PDSeries Power Supplies Specifications

Specifications
Electrical Specifications		conform to IEEE488-1978
Mechanical Specifications		conform to IEEE488-1978
Interface Function		SH1, AH1, T6, L3, SR1, RL1, PP0, DC1, DT1, C0
Address		Any address from 0-30 can be set with the address switch.
Listen-Only Mode		Can be set with L-ONLY switch.
Remote-Local Function		Can be set with LOCAL switch.
Service Request Function		Input data format error, input setting error, and changes in CV/CC conditions of the supply being controlled; also breaker shutoff (PD Series only) or power switch OFF status during abnormal voltage conditions of the supply being controlled.
Analog Output
Channel	A, B Channel		C Channel
Output Voltage Range	0 to 10V (bipolar)		0 to 10V (monopolar)
Full Scale Voltage Variable Range	10V 15%		10V 15%
Maximum Output Current	3mA
D/A Converter Resolution	12bit, 0.05% (4.8mV) (Linear 8bit)		8bit, 0.4% (39mV) (Linear 8bit)
D/A Converter Accuracy (Ta 25C)	0.025% (1/2LSB)		0.2% (1/2LSB)
Setting Accuracy	0.0275%		0.22%
Output Ripple and Noise	300µsVr.m.s. or less (10Hz to 1MHz)
Input Voltage Regulation	1.5mV or less (10% fluctuate)
Load Regulation	1.5mV or less (0 to 100% fluctuate)
Temperature Coefficient	50ppm/(Typ.)
Rise Time	100µs or less (10 to 90%, 10kW load)
Power Source		100V 10%, 120, 220, 240V, (250V MAX) AC internally switchable, 50/60Hz
Power Consumption		15W
Case Dimensions		68 (W) X 147 (H) X 251 (D) mm
Maximum Dimensions		73 (W) X 161.5 (H) X 284 (D) mm
Weight		Approx. 2.3kg
Accessories
GP610D		Instruction manual 1 OP14 1 set (3 pin DIN 3 core arrow-shaped tip cable) 2 (7pin DIN 7pin DIN cable) 1
Warranty		3 years

Kenwood Models GP610D GP-IB Adaptor for PA and PD Series Power Supplies Specifications

Kenwood Models GP610D GP-IB Adaptor
for PA and PD Series Power Supplies Specifications