- Capability of analyzers, curve tracers, and I-V systems at a fraction of the cost
- 200V, 1A, 20W
- 0.012% basic measure accuracy
- Enhanced sensitivity
- Source and sync (4-quadrant) operation
- Four "Quickset" modes for fast setup and measurements
- Rear panel input triaxial connections
- 2450 SCPI and TSP scripting programming modes
- Model 2400 SCPI-compatible programming mode
- Front panel USB memory port for data/programming/configuration I/O
- Nanomaterials and devices
- Carbon nanotubes
- Low power nanostructures
- Semiconductor structures
- Thin films
- Organic materials and devices
- Printable electronics
- Energy efficiency and lighting
- Photovoltaics/solar cells
- Discrete and passive components
- Two-leaded resistors, diodes, zener diodes, LEDs, disk drive heads, and sensors
- Three-leaded small signal bipolar junction transistors (BJTs), field effect transistors (FETs) (and more)
- Material characterization
- Hall effect
The Keithley 2450-NFP 200V/1A/20W Advanced Touchscreen SourceMeter SMU Instrument truly brings Ohm's law (current, voltage, and resistance) testing right to your fingertips. Its innovative graphical user interface (GUI) and advanced, capacitive touchscreen technology allow intuitive usage and minimize the learning curve to enable engineers and scientists to learn faster, work smarter, and invent easier. The 2450-NFP is the SMU for everyone: a versatile instrument, particularly well-suited for characterizing modern scaled semiconductors, nano-scale devices and materials, organic semiconductors, printed electronics, and other small-geometry and low-power devices. All this combined with Keithley SMU precision and accuracy allow users to Touch, Test, InventTM with the new favorite go-to instrument in the lab for years to come.
Learn Faster, Work Smarter, Invent Easier
Unlike conventional instruments with dedicated pushbutton technology and small, obscure, limited- character displays, the 2450-NFP features a five-inch, full-color, high resolution touchscreen that facilitates ease of use, learning, and optimizes overall speed and productivity. A simple icon-based menu structure reduces configuration steps by as much as 50 percent and eliminates the cumbersome multi-layer menu structures typically used on soft-key instruments. Built-in, context-sensitive help enables intuitive operation and minimizes the need to review a separate manual. These capabilities combined with its application versatility make the 2450-NFP the SMU instrument inherently easy to use for basic and advanced measurement applications, regardless of your experience level with SMU instruments.
Fourth-Generation, All-in-One SMU Instrument
The 2450-NFP is the fourth-generation member of Keithley's award-winning SourceMeter family of SMU instruments; it offers a highly flexible, four-quadrant voltage and current source/load coupled with precision voltage and current meters. This all-inone instrument can be used as a:
- Precision power supply with V and I readback
- True current source
- Digital multimeter (DCV, DCI, ohms, and power with 6 1/2-digit resolution).
- Precision electronic load
- Trigger controller
Ease of Use Beyond the Touchscreen
In addition to its five-inch, color touchscreen, the 2450-NFP front panel has many features that supplement its speed, user-friendliness, and learnability, including a USB 2.0 memory I/O port, a HELP key, a rotary navigation/control knob, a front/rear input selector button, and banana jacks for basic bench applications. The USB 2.0 memory port supports easy data storing, saving instrument configurations, loading test scripts, and system upgrades. Plus, all front panel buttons are backlit to enhance visibility in low-light environments.
Four "Quickset" modes simplify user setup. With one touch, the instrument can be quickly configured for various operating modes without the need to configure the instrument indirectly for this operation.
Comprehensive Built-in Connectivity
Rear panel access to rear-input triax connectors, remote control interfaces (GPIB, USB 2.0, and LXI/Ethernet), D-sub 9-pin digital I/O port (for internal/external trigger signals and handler control), instrument interlock control, and TSP-Link jacks enables easy configuration of multiple instrument test solutions and eliminates the need to invest in additional adapter accessories.
Convert Raw Data to Information
The 2450-NFP provides a full plotting and sheet view to display sweeps, measurement data, and charting right on the screen. It also supports exporting to a spreadsheet for further analysis, dramatically improving productivity for research, bench-top testing, device qualification, and debugging.
TriggerFlow Building Blocks for Instrument Control and Execution
The 2450-NFP incorporates Keithley's new TriggerFlow triggering system that allows user control of instrument execution. Similar to developing a flow chart, TriggerFlow diagrams are created using four fundamental building blocks:
Wait - Waits for an event to occur before the flow continues
Branch - Branches when a condition has been satisfied
Action - Initiates an action in the instrument, for example, measure, source, delay, set digital I/O, etc.
Notify - Notifies other equipment that an event has occurred
A TriggerFlow model using a combination of these building blocks can be created from the front panel or by sending remote commands. With the TriggerFlow system, users can build triggering models from very simple to complex with up to 255 block levels. The 2450-NFP also includes basic triggering functions, including immediate, timer, and manual triggering.
Unmatched System Integration and Programming Flexibility
When the 2450-NFP is integrated as part of a multi-channel I-V test system, the Test Script Processor (TSP) embedded scripting capability allows test scripts to be run by the instrument, enabling the user to create powerful measurement applications with significantly reduced development times. TSP technology also offers channel expansion without a mainframe. Keithley's TSP-Link channel expansion bus, which uses a 100 Base T Ethernet cable, connects multiple 2450-NFP instruments and other TSP instruments such as Keithley's Series 2600B SourceMeter SMU instruments and Series 3700A Switch/Multimeter systems in a master-slave configuration that behaves as one integrated system. The TSP-Link expansion bus supports up to 32 units per GPIB or IP address, making it easy to scale a system to fit an application's particular requirements.
The 2450-NFP also includes a SCPI programming mode that optimizes the instrument's new features, as well as a SCPI 2400 mode that provides backwards compatibility with an existing Model 2400 SourceMeter instrument. Not only does this preserve your 2400 investment, but it also eliminates re-work normally associated with upgrading to a new instrument with new capabilities.
Parallel Test Capability
With the TSP technology in the 2450-NFP, multiple devices can be tested in parallel to meet the needs of device research, advanced semiconductor lab applications, and even high throughput production test. This parallel testing capability enables each instrument in the system to run its own complete test sequence, creating a fully multi-threaded test environment. The number of tests that can be run in parallel on a 2450-NFP can be as high as the number of instruments in the system.
Free Instrument Control Start-up Software and Web Interface
KickStart, Keithley's new instrument control non-programming start-up software, lets users start taking measurements in minutes. In most cases, users merely need to make quick measurements, graph the data, and store the data to disk to perform analysis in software environments such as Excel.
- KickStart offers the following functionality:
- Instrument configuration control to perform I-V characterization
- Native X-Y graphing, panning, and zooming
- Spreadsheet/tabular viewing of data
- Saving and exporting data for further analysis
- Saving of test setups
- Screenshot capturing of graph
- Annotation of tests
- Command line dialog for sending and receiving data
- HTML help
- GPIB, USB 2.0, Ethernet compliant
|1754||Keithley 1754 Universal Test Lead Kit for Series 2400 and DMMs||
|5804||Keithley 5804 4-Wire/Kelvin Test Lead Set for Series 2400, Model 2750, and DMMs||
|5805||Keithley 5805 .9m Kelvin Probes for Series 2400, Model 2750, and DMMs||
|5806||Keithley 5806 .9m Kelvin Clip Lead Set for Series 2400, Model 2750, and DMMs||
|5808||Keithley 5808 Single-Pin Kelvin Probes for Series 2400, Models 2700, 2701, and 2750, and DMMs||
|5809||Keithley 5809 Kelvin Clip Lead Set for Series 2400, Models 2700, 2701, and 2750, and DMMs||
|8605||Keithley 8605 High Performance Modular Test Leads for Series 2400 and DMMs||
|8606||Keithley 8606 High Performance Modular Probes for Series 2400 and 3700A, and DMMs||
|8608||Keithley 8608 Safety Clip-On Test Lead Set for Models 2001, 2002, 2010, 7700, 7702, 7706, and 7708||
|237-ALG-2||Keithley 237-ALG-2 2m Triax-to-Alligator-Clips Low Noise Cable||
|237-BAN-3A||Keithley 237-BAN-3A Triax-to-Banana Plug for Models 4200-SCS, 7072, and 7072-HV||
|2450-TRX-BAN||Keithley 2450-TRX-BAN Triax-to-Banana Plug Adapter for Model 2450||
|7078-TRX-GND||Keithley 7078-TRX-GND 3-Slot-Male-Triax-to-BNC Adapter with Disconnected Guard||
|CA-18-1||Tektronix CA-18-1 Cable||
|KPCI-488LPA||Keithley KPCI-488LPA IEEE-488.2 Interface Module for PCI Buses||
|KUSB-488B||Keithley KUSB-488B IEEE-488.2 USB-to-GPIB Interface Adapter for USB Ports||
|CA-180-3A||Tek Video CA-180-3A Crossover RJ45 Cable||Not Available||
|USB-B-1||Keithley USB-B-1 USB Cable||
|2450-TLINK||Keithley 2450-TLINK DB9-to-Trigger Link Connector Adapters for Model 2450||
|8501-2||Keithley 8501-2 2m Micro-DIN-Male-to-Micro-DIN-Male Trigger Link Cable||
|4299-8||Keithley 4299-8 Single Fixed Rack Mount Kit||
|4299-9||Keithley 4299-9 Dual Fixed Rack Mount Kit||
|4299-10||Keithley 4299-10 Dual Fixed Rack Mount Kit for Series 2600B and Model 2450||
|4299-11||Keithley 4299-11 Universal Fixed Rack Mount Kit||
|2450-BENCHKIT||Keithley 2450-BENCHKIT Ears & Handle for Models 2450-NFP-RACK and 2450-RACK||