|
<< Kaltman Antennas |
Kaltman Creations HyperLOG
EMC Broadband Antennas
|
|
|
 
Kaltman Creations HyperLOG
Antenna Shown |
|
|
- Only one single broadband antenna is required for the 380MHz to 18GHz
frequency range (various other model ranges
available)
- Well suited for EMC measurements with spectrum analyzers
- Complete ISO calibration certificate (optional)
- Top-quality, high-tech TEFLON coated Gold elements
- High-tech Radom with a modern, aesthetic design
- Freely align-able polarization
- Calibration data can be saved and read-back from an IC within the
antenna
- Excellent forward / backward ratio
- Excellent symmetry of radiation patterns
- Integrated 5/8" tripod socket
- Suitable for mobile use
- Suitable for outdoor installation
- Robust, splash proof design
- Small, lightweight design
- 10 year warranty
- Design: Logarithmic-periodic
- Max. Transmission power: 100W CW (400 MHz)
- Nominal impedance: 50 Ohms
- Return loss: Better than -10dB
- RF connection: SMA socket (18GHz) or N socket using an adapter
- Polarization: linear vertical/horizontal
|
|
|
| Selection Guide |
Hyper
LOG
3080 |
Hyper
LOG
30100 |
Hyper
LOG
4025 |
Hyper
LOG
4040 |
Hyper
LOG
4060 |
Hyper
LOG
60100 |
Hyper
LOG
7025 |
Hyper
LOG
7040 |
Hyper
LOG
7060 |
| Frequency Min |
380MHz |
380 MHz |
400MHz |
400 MHz |
400 MHz |
680 MHz |
700 MHz |
700 MHz |
700 MHz |
| Frequency Max |
8GHz |
10 GHz
(30180: 18 GHz) |
2,5GHz |
4 GHz |
6 GHz |
10 GHz
(60180: 18 GHz) |
2.5GHz |
4GHz |
6 GHz |
| VSWR (typical) |
<1:2.5 |
<1:2.5 |
<1:2 |
<1:2 |
<1:2 |
<1:2.5 |
<1:2 |
<1:2 |
<1:2 |
| Gain (typical) |
5dBi |
5dBi |
4dBi |
4dBi |
5dBi |
5dBi |
4dBi |
4dBi |
5dBi |
| Antenna factor |
20-43dB/m |
20-46dB/m |
18-34dB/m |
18-38dB/m |
20-40dB/m |
22-46dB/m |
23-34dB/m |
23-38dB/m |
26-41dB/m |
| Calibration points |
763 (10MHz steps) |
963
(10MHz steps) |
211 (10MHz steps) |
361
(10MHz steps) |
561
(10MHz steps) |
933
(10MHz steps) |
183
(10MHz steps) |
333
(10MHz steps) |
533
(10MHz steps) |
| Dimensions LxWxD |
590 x 360 x 30 mm |
590 x 360 x 30 mm |
590x360x30 mm |
590 x 360 x 30 mm |
590 x 360 x 30 mm |
340 x 200 x 25 mm |
340 x 200 x 25 mm |
340 x 200 x 25 mm |
340 x 200 x 25 mm |
| Weight |
~2.2 lbs (1 kg) |
~2.2 lbs (1 kg) |
~2.64 lbs (1.2 kg) |
~2.64 lbs (1.2 kg) |
~2.2 lbs (1 kg) |
~0.6 lbs (0.25 kg) |
~0.7 lbs (0.27 kg) |
~0.7 lbs (0.27 kg) |
~0.6 lbs (0.25 kg) |
|
|
|
EMC antennas from Aaronia have several distinct advantages over
many other comparable models.
One of the main advantages of
the Aaronia antennas is that they are not "naked" (directly exposed
to the atmospheric elements). Aaronia houses their gold plated,
Teflon elements in a specially constructed, high technology Radom
housing. This Radom housing was designed in such a way that its
shape, material and special coating have virtually no influence on
measurements; not even in the case of dew or humidity collection on
the surface. And of course the Radom housing helps to prevent
oxidation, fissures, and general physical damage.
Professional broadband measurement antennas have one distinct
disadvantage, they are extremely expensive. The Aaronia HyperLOG®
series of antennas offers a cost-effective alternative while
maintaining above industry specifications and standards.
Whatever your antenna needs - point to point communication, fixed
receiving, voice, data, machine control, or for use with Spectran RF
Spectrum Analyzers - the Aaroina HyperLOG antennas represents a true
cost effective alternative!
Calibrations and Certifications
Calibration is performed by comparison with reference standards or
reference measurement devices. These measurement devices have been
calibrated by the national German calibration service (DKD) and
therefore have been calibrated according to the national reference
standards which are in accordance with the international units
system (SI).
This calibration is performed in accordance with: DIN
EN ISO/IEC 17025 and ISO 9001 standards.
The LOG Periodic antennas
of the HyperLOG® 60xx series are suitable for interference field
strength measurement. The specialized broadband characteristics
allow measurements to be taken in the specified frequency range
without switching.
These antennas are suitable for measurement
according to the following standards and procedures: CISPR, VDE,
MIL, VG, EN 55011, EN 55013, EN 55015, EN 55022, MIL-Std-461. |
|
|
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| HYPERLOG3080 |
Kaltman HyperLOG 3080 High-Performance EMC Broadband Antenna, 380MHz to 8GHz |
 |
$1,732.00 |
| HYPERLOG30100 |
Kaltman HyperLOG 30100 EMC Broadband Antenna, 380 MHz - 10 GHz |
|
$2,950.00 |
| HYPERLOG30180 |
Kaltman HyperLOG 30180 EMC Broadband Antenna, 380 MHz - 18 GHz |
|
$5,895.00 |
| HYPERLOG4025 |
Kaltman HyperLOG 4025 High-Performance EMC Broadband Antenna, 400MHz to 2.5GHz |
|
$870.00 |
| HYPERLOG4040 |
Kaltman HyperLOG 4040 EMC Broadband Antenna, 400 MHz - 4 GHz |
|
$998.00 |
| HYPERLOG4060 |
Kaltman HyperLOG 4060 EMC Broadband Antenna, 400 MHz - 6 GHz |
|
$1,375.00 |
| HYPERLOG60100 |
Kaltman HyperLOG 60100 EMC Broadband Antenna, 680 MHz - 10 GHz |
|
$2,360.00 |
| HYPERLOG60180 |
Kaltman HyperLOG 60180 EMC Broadband Antenna, 680 MHz - 18 GHz |
|
$4,420.00 |
| HYPERLOG7025 |
Kaltman HyperLOG 7025 High-Performance EMC Broadband Antenna, 700MHz to 2.5GHz |
|
$495.00 |
| HYPERLOG7040 |
Kaltman HyperLOG 7040 High-Performance EMC Broadband Antenna, 700MHz to 4GHz |
|
$675.00 |
| HYPERLOG7060 |
Kaltman HyperLOG 7060 EMC Broadband Antenna, 700 MHz - 6 GHz |
|
$875.00 |
| Included Accessories |
| |
- Standard calibration data (model specific, in 10MHz steps)
- Aluminum carrying case with custom padding
- Detachable pistol-grip handle which converts into a mini-tripod stand
- Sturdy, multi-purpose aluminum tripod with spirit-level
- Special Aaronia SMA tool with over-torque protection
|
Included |
| Optional accessories |
| 5MCABLE |
Kaltman 5-M Cable 5 Meter SMA Cable |
|
$138.00 |
| 10MCABLE |
Kaltman Creations 10MCABLE 10-Meter SMA Cable |
|
$168.00 |
| SMAN |
Kaltman Creations SMAN SMA to N Adaptor |
|
$39.00 |
|
)
PDF Help