Test Equipment Depot Top Nav Bar
Test Equipment Depot - 800.517.8431 Free Ground Shipping Offer
<< Instek Function Generators

Instek AFG-3081
80 MHz Arbitrary Function Generator

  • Wide frequency range from 1uHz to 80MHz
  • Supports many types of signal applications
  • High 200MSa/s sampling rate
  • 16-bit Amplitude Resolution
  • Output from any section of 1M-point-long waveforms
  • 4.3" high resolution LCD display
  • Four ways to generate arbitrary waveforms from
    • Front Panel Operation
    • CSV file uploading
    • Direct Waveform Reconstruction (DWR)
    • Arbitrary Waveform Editing PC Software
  • Impedance switch / on-screen help
  • USB, RS-232, GPIB interface support


Click here for a larger image -Instek AFG-3081Click here for larger image
Instek AFG-3081 Shown
 

Product Information

Datasheet 5 MB
Manual 8.7 MB

PDF Help

   
The AFG-3081 is arbitrary waveform generator designed for industrial, scientific research and educational applications. The AFG-3081 generator comes in bandwidths of 80MHz with built-in multiple standard waveforms to meet users' diversified needs.

The AFG-3081 Series also provides a high 16 bit resolution, 200MSa/s sample rate and a 1M memory depth for editing arbitrary waveforms directly through the intuitive user interface. The Direct Waveform Reconstruction (DWR) function enables users to directly import waveforms from a GDS-2000 Series oscilloscope to the AFG3081 via USB host, allowing users to edit waveforms and enhance measurement efficiency.

In addition, the AFG-3081 has switchable 50 Ohm and Hi-Z Impedances, built-in On-Screen Help for operation conveniently. Complete parameter settings and waveform can be displayed through 4.3-inch high-resolution TFT LCD. Through USB, RS-232, and GPIB, user can use dedicated PC software or IEEE488.2 commands to edit waveforms.
 
Specifications
Waveforms Sine, Square, Ramp, Pulse, Noise, DC, Sin(x)/x, Exponential Rise, Exponential Fall, Negative Ramp
Arbitrary Waveforms ARB Function Built in
Sample Rate 200 MSa/s
Repetition Rate 100MHz
Waveform Length 1M points
Amplitude Resolution 16 bits
Non-Volatile Memory Ten 1M waveforms(1)
User define Output Section Any section from 2 to 1M points
User define Mark Output Any section from 2 to 1M points
Frequency Characteristics Range Sine 80MHz
Square 80MHz
Triangle, Ramp 1MHz
Resolution 1uHz
Accuracy Stability ±1 ppm 0 to 50°C
±0.3 ppm 18 to 28°C
Aging ±1 ppm, per 1 year
Tolerance ≤ 1 uHz
Output Characteristic Amplitude Range 10 mVpp to 10 Vpp( into 50Ω)
20 mVpp to 20 Vpp(open-circuit)
Accuracy ± 1% of setting ±1 mVpp
(at 1 kHz,>10 mVpp)
Resolution 0.1 mV or 4 digits
Flatness ± 1% (0.1dB) <10 MHz
± 2% (0.2 dB) 10 MHz to 50 MHz
± 10% (0.9 dB) 50 MHz to 70 MHz
± 20% (1.9 dB) 70 MHz to 80 MHz
(sinewave relative to 1 kHz)
Units Vpp, Vrms, dBm,
Offset Range ±5 Vpk ac +dc (into 50Ω)
±10Vpk ac +dc (Open circuit)
Accuracy 1% of setting + 2 mV+ 0.5% of amplitude
Waveform Output Impedance 50Ω typical (fixed)
> 10MΩ (output disabled)
Protection Short-circuit protected
Overload relay automatically disables main output
SYNC Output Level TTL-compatible into>1kΩ
Impedance 50Ω nominal
Sine Wave Characteristic Harmonic Distortion –60 dBc DC~1 MHz, Ampl Vpp
–55 dBc DC~1 MHz, Ampl>3 Vpp
–45 dBc 1MHz~5 MHz, Ampl>3 Vpp
–30 dBc 5MHz~80 MHz, Ampl>3 Vpp
Total Harmonic Distortion < 0.2%+0.1m Vrms
DC to 20 kHz
Spurious (non-harmonic) –60 dBc DC~1 MHz
–50 dBc 1MHz~20MHz
–50 dBc+ 6 dBc/octave 1MHz~80MHz
Phase Noise -65dBc typical 10MHz, 30 kHz band
-47dBc typical 80MHz, 30 kHz band
 
Ordering Information
Model Description Buy Online Price
AFG3081  Instek AFG-3081 80 MHz Arbitrary Function Generator  Buy Now $2,700.00

Included Accessories

 
  • 1 - Instruction Manual
  • 1 - Test Lead
  • 1 - Power Cord

Included


 

Instek Catalog   |   Instek Price List

$40.00 Minimum on Total Order