|
Specifications |
|
CRT |
Type |
6-inch
rectangular type with internal graticule; 0%, 10%, 90% and
100% markers.
8 x 10 DIV (1 DIV=1 cm) |
|
Accelerating Potential |
approx. 2kV |
|
Trace Rotation |
Provided |
|
Z-axis Input |
±(3% x
[Readout] + 0.05 div x Volts/div |
|
Usable
frequency range: |
DC to 2MHz
|
|
Maximum input
voltage: |
30V (DC+AC
peak) at 1kHz or less |
|
Input
impedance: |
approx. 47kΩ |
|
Vertical
System |
Sensitivity and Accuracy |
1mV ~ 2mV/DIV
+ 5%, 5mV ~ 20V/DIV + 3%, 14 calibrated steps in 1-2-5
sequence |
|
Vernier Vertical Sensitivity |
Continuously
variable to 1/2.5 or less panel indicate value |
|
Bandwidth (-3dB) and Rise Time |
5mV ~ 20V/DIV |
Bandwidth(-3dB): |
DC ~ 30MHz |
|
Rise Time: |
Approx.
11.67nS |
|
1mV ~ 2mV/DIV |
Bandwidth(-3dB): |
DC ~ 7MHz |
|
Rise Time: |
Approx. 50nS |
|
Maximum Input Voltage |
400V (DC + AC peak) at 1kHz or less |
|
Input Coupling |
AC, DC, GND |
|
Input Impedance |
1MΩ + 2% //
approx. 25pF |
|
Vertical Modes |
CH1, CH2, DUAL (CHOP, ALT), ADD, CH2 INV |
|
CHOP Frequency |
Approx. 250kHz |
|
Dynamic Range |
8 DIV at 20MHz, 6 DIV at 30MHz
|
|
Horizontal
System |
Sweep Time |
0.2µS/DIV ~
0.5S/DIV, 20 steps selectable in 1-2-5 sequence, continuous
variable control between steps at least 1：2.5 |
|
Accuracy |
+ 3%, + 5% at
x5, x10 MAG. + 8% at x20 MAG |
|
Sweep Magnification |
x5, x10, x20
MAG |
|
Maximum Sweep Time (at MAG) |
100nS/DIV (10nS/DIV ~ 40nS/DIV are uncalibrated) |
|
ALT-MAG Function |
Available |
|
Horizontal
System |
Sweep Time |
0.2µS/DIV ~
0.5S/DIV, 20 steps selectable in 1-2-5 sequence, continuous
variable control between steps at least 1：2.5 |
|
Accuracy |
+ 3%, + 5% at
x5, x10 MAG. + 8% at x20 MAG |
|
Sweep Magnification |
x5, x10, x20
MAG |
|
Maximum Sweep Time (at MAG) |
100nS/DIV (10nS/DIV ~ 40nS/DIV are uncalibrated) |
|
ALT-MAG Function |
Available |
|
Trigger |
Sweep Time |
0.2µS/DIV ~
0.5S/DIV, 20 steps selectable in 1-2-5 sequence, continuous
variable control between steps at least 1：2.5 |
|
Source |
+ 3%, + 5% at
x5, x10 MAG. + 8% at x20 MAG |
|
Coupling |
x5, x10, x20
MAG |
|
Slope |
100nS/DIV (10nS/DIV ~ 40nS/DIV are uncalibrated) |
|
Sensitivity |
Sensitivity: |
20Hz ~ 2MHz |
2MHz ~ 20MHz |
20MHz ~ 30MHz |
|
CH1, CH2: |
0.5 DIV |
1.5 DIV |
2.0 DIV |
|
VERT-MODE: |
2.0 DIV |
3.0 DIV |
3.5 DIV |
|
EXT: |
200mV |
800mV |
1V |
|
External Input |
Input
Impedance: |
Approx. 1MΩ //
25pF (AC coupling) |
|
Max. input
voltage: |
400V (DC + AC
peak) at 1kHz |
|
Hold-off Time |
Variable |
|
X-Y Operation |
Input |
X-Axis: |
CH1 |
|
Y-Axis: |
CH2 |
|
Sensitivity |
1mV/DIV ~
20V/DIV |
|
Bandwidth |
X-Axis: DC ~
500kHz (-3dB) |
|
Phase Difference |
3º or less
from DC to 50kHz |
|
Output Signal |
Trigger Signal Output |
Voltage: |
approx.
20mV/DIV (with 50Ω terminated) |
|
Bandwidth:
|
50Hz to at least 5MHz |
|
Sensitivity |
Voltage: 0.5V
+ 3%, Frequency, approx. 1kHz, Square wave |
|
CRT Readout |
Panel Setting Display |
CH1/CH2
Sensitivity, Sweep time, trigger conditions |
|
Panel Setting Save & Recall |
10 Sets |
|
Cursor Measurement |
Cursor
measurement function: |
ΔV, ΔT, 1/ΔT
|
|
Cursor
resolution: |
1/25 DIV |
|
Effective
cursor range： |
vertical: + 3
DIV, horizontal: + 4 DIV |
|
Frequency Counter |
Frequency
range: |
50Hz ~ 30MHz
Accuracy: + 0.01%
|
|
Measuring
sensitivity: |
more than 2
DIV (measuring source selected from CH1 or CH2 as
synchronous signal sources) |
)
PDF Help