- 300MHz Bandwidth, 2 Input Channel
- 2GSa/s Real-time Sampling Rate and 100GSa/s Equivalent Time Sampling Rate
- 2MegaPoints Record Length
- 1mV /div to 10V/div of Vertical Range
- 1ns/div to 100s/div of Time Base Range
- 80,000 wfm/s of Waveform Update Rate
- 8 inch 800*600 High Resolution TFT LCD Display
- Built-in Segmented Memory and Waveform Search Functions to Optimize the Efficiency of Record Length
- Zoom Window and Play/Pause can Rapidly Navigate the Waveforms
- 36 Automatic Measurement Functions Offers Various Measurement Selections
- Flexible Remote Control Connectivity (Standard: USB; Option: LAN/GPIB)
Instek GDS-2302A 300 MHz 2 Ch Visual Persistence Digital Storage Oscilloscope offers 2-channel configurations and 300MHz bandwidth. It provides 2GSa/s maximum real-time sampling rate and 100GSa/s high-speed equivalent-time sampling rate. Equipped with an 8-inch 800 x 600 high-resolution TFT LCD display, 1mV/div to 10V/div vertical range and 1ns/div to 100s/div time base, the Instek GDS2302A 300 MHz 2 Ch Visual Persistence Digital Storage Oscilloscope is able to faithfully demonstrate waveforms of complicated and obscure signals.
The Instek GDS-2302A 300 MHz 2 Ch Visual Persistence Digital Storage Oscilloscope provides 2Mega point record length, and Waveform Search and Segmented Memory functions as standard features. The events of interest can be captured and saved into the Segmented Memory, which can be divided into 2048 sections, for observation, while the irrelevant waveforms can be ignored. Consequently, the overall efficiency of memory usage can be enhanced. Under Waveform Search mode, after the input signal is triggered, the Instek GDS-2302A 300 MHz 2 Ch Visual Persistence Digital Storage Oscilloscope is able to Search and Mark the waveform sections, which comply with user-defined search condition and threshold level within the whole memory. Meanwhile, with Zoom window and Play/Pause button to scroll through whole displayed waveform, the user can rapidly navigate all the waveforms in an efficient way.
The ping-pong waveform acquisition design and the advanced VPO-technology-based waveform procession system greatly enhance the speed and the quality of waveform display of Instek GDS-2302A 300 MHz 2 Ch Visual Persistence Digital Storage Oscilloscope at a very fast update rate of 80,000 waveforms per second.
The optional logic analyzer function allows the signal acquisition through logic triggering and enables the logic waveforms and the analog waveforms to be shown on the same screen for comparison and time correlation analysis. This Mixed Signal Oscilloscope function is field-installable with a plug in module, containing either 8 or 16 input channels, at the rear panel. The MSO function supports the IC/SPI/UART serial bus trigger and decoding.
The Instek GDS-2302A 300 MHz 2 Ch Visual Persistence Digital Storage Oscilloscope is equipped with all the features that a high-tech DSO should have today/ THE RS-232C interface, USB ports, and Go-NOGo output are provided as standard, and the Ethernet port, SVGA video output and GPIB port are available as options for user's free selection.
|DS2-LAN||Instek DS2-LAN Ethernet & SVGA output for the GDS-2000A series||
|DS2-GPIB||Instek DS2-GPIB GPIB Interface for the GDS-2000A series||
|DS2-FGN||Instek DS2-FGN DDS Function Generator for the GDS-2000A series||
|DS2-8LA||Instek DS2-8LA 8 Channel Logic Analyzer Module for GDS-2202A & GDS-2302A||
|DS2-16LA||Instek DS2-16LA 16 Channel Logic Analyzer Module for GDS-2204A & GDS-2304A||