Phone 800-517-8431
Free Shipping over $75

Instek MSO-2072E

70 MHz, 2-Channel Digital Storage Oscilloscope, 16-channel Logic Analyzer

Brand: Instek
Model No: MSO-2072E
Our Model No: MSO2072E
Condition: NEW
PDF Document Icon Data Sheet (1.66 MB)


Add to Cart

Product Features:

  • 70 MHz bandwidth
  • 2 channels
  • Equipped with a 16-Channel Logic Analyzer
  • Real time sample rate for each channel is 1GSa/s
  • Maximum 10M memory depth and VPO waveform display technology
  • Waveform update rate up to 120,000 wfms/s
  • 8" WVGA TFT LCD screen display
  • Maximum 1M FFT provides higher frequency domain resolution measurements
  • High Pass, Low Pass and Band Pass Filter Functions
  • 9,000 segmented memory sections and waveform search function
  • I2C/SPI/UART/CAN/LIN serial bus trigger and decoding functions
  • Data log function is able to track signal changes up to 100 hours
  • Network storage function

Economical and Multi-Functional MSO

The Instek MSO-2072E is a mixed-signal oscilloscope, which offers 2 analog channels + 16 digital channels. The MSO2072E has a built-in 16-channel logic analyzer. The oscilloscope features a bandwidth of 70MHz. The Dual analog channel models provide 1GSa/s real-time sampling rate per channel. The 8-inch 800*480 TFT LCD and the minimum 1mV/div vertical range allows the MSO-2072E to measure complex feeble signals and clearly display measurement results.


For analog channels, the MSO2072E provides 10M long memory for users to completely retrieve and analyze waveforms. Users, based upon the application requirements, can select 1k, 10k, 100k, 1M or 10M memory depth. Short memory depth collocating with the high sampling rate allows users to observe fast-changing waveforms and, on the other hand, long memory depth aims for continuously changing waveforms. The MSO-2072E is equipped with waveform search and segmented memory functions to expand the flexible applications of 10M long memory. The segmented memory can be divided the maximum into 29,000 sections for users to bypass any unimportant waveforms so as to swiftly search all required waveforms. With the segmented memory function, more meaningful waveforms can be saved and target waveforms can be displayed rapidly. Users, by using the waveform search function, can rapidly search desired waveforms according to the required trigger conditions.

16-channel logic analyzer

16-channel logic analyzer has a memory depth of 10Mpts per channel, which can retrieve more and longer digital signals as well as clearly display digital signals to obtain sufficient information for analysis. The minimum input swing of logic analyzer represents the minimum operating voltage of ±250 mV, which demonstrates that digital channels are highly sensitive with respect to input. The standard bus trigger and decoding functions include serial and parallel bus such as I2C, SPI, UART (RS232/422/485) and CAN/LIN bus for automotive communications. The parallel bus function is only for digital channels. Bus waveforms can be triggered and decoded in real time. The MSO-2072E offers complete analysis and debugging capabilities with the economical pricing.

Main Specifications
Channels 2 Channels
Bandwidth DC~70MHz(-3dB)
Rise Time 5 ns
Bandwidth Limit 20mHz
Display System
TFT LCD Type 8" TFT LCD WVGA color display
Display Resolution 800 horizontal x 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform Display Dots, Vectors, Variable persistence(16ms~10s), Infinite persistence
Waveform Update Rate 120,000 waveforms per second, maximum
Display mode YT ; XY
Display Graticule 8 x 10 divisions
USB Port USB 2.0 Full-speed host port x 1, USB High-speed 2.0 device port x 1
Ethernet Port (LAN) RJ-45 connector, 10/100Mbps with HP Auto-MDIX
Go/NoGo BNC 5V Max/10mA TTL open collector output
Kensington Style Lock Rear-panel security slot connects to standard Kensington-style lock
Vertical Sensitivity
Resolution 8 bit
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
DC Gain Accuracy ±(3%)when 2mV/div or greater is selected
±(5%)when 1mV/div is selected
Polarity Normal & Invert
Maximum Input Voltage 300Vrms, CAT I
Offset Position Range 1mV/div ~ 20mV/div : ± 0.5V ; 50mV/div ~ 200mV/div : ± 5V ; 500mV/div ~ 2V/div : ± 25V ; 5V/div~10V/div : ± 250V
Waveform Signal Process +, -, ×, ÷, FFT, FFTrms ,User Defined Expression
FFT : 1Mpts ; FFT : Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS ; FFT Window Displays : Rectangular, Hamming , Hanning, Blackman-Harris
Source CH1 ,CH2, Line, EXT
Trigger Mode Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Trigger Type Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-Delay(1~65535 events), Time-Delay(Duration,4nS~10S), Bus
Holdoff range 4ns~10s
Coupling AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity 1div
External Trigger
Range ±15V
Sensitivity DC ~ 100MHz Approx. 100mV; 100MHz ~ 200MHz Approx. 150mV
Input Impedance 1MΩ±3%, ~16pF
Time Base Range 1ns/div ~ 100s/div (1-2-5 increments); ROLL : 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 2,000,000 div maximum
Time Base Accuracy ±50 ppm over any ≥ 1 ms time interval
Real Time Sample Rate Max. : 1GSa/s
Record Length 10Mpts/CH
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection 2ns (typical)
Average Selectable from 2 to 256
Logic Analyzer Specs
Sample Rate Per Channel 1GSa/s
Bandwidth 200MHz
Record Length Per Channel 10M pts (max)
Input Channels 16 Digital (D15 - D0)
Trigger Type Edge, Pattern, Pulse Width, Serial bus (I2C, SPI, UART(RS232/422/485), CAN, LIN), Parallel Bus
Maximum Input Voltage ±40 V
Minimum Voltage Swing ±250 mV
Vertical Resolution 1 bit
  • 1 - Power Cord
  • 1 - Certificate of Calibration
  • 1 - CD-ROM (with Quick Start Guide, User Manual, Programming Manual)
  • 2 - Passive probes
  • 1 - GTL-16E, 16-channel logic analyzer probe
Model Description Buy Now Price
GSC-008 Instek GSC-008 Soft Carrying Case Add to Cart
Sale $99.00
GTL-246 Instek GTL-246 USB Cable 2.0 A-A Type Add to Cart


GDB-03 Instek GDB-03 Oscilloscope training kit for GDS3000 Add to Cart
Sale $274.50
GTP-033A Instek GTP-033A 1:1 35MHz Passive probe GDS-3000 Series Add to Cart
Sale $99.00
GCP-020 Instek GCP-020 40Hz-10KHz/20A Current Probe GDS3000 Add to Cart


GCP-100 Instek GCP-100 DC-100KHz/10A Current Probe GDS3000 Add to Cart
Sale $607.50
GCP-1030 Instek GCP-1030 100 MHz/30A Current Probe Add to Cart
Sale $3,712.50
GCP-206P Instek GCP-206P Power Supply for Current Probes ( 2 input Channel) Add to Cart
Sale $819.00
GCP-425P Instek GCP-425P Power Supply for Current Probes (4 input Channel) Add to Cart
Sale $1,219.50
GCP-530 Instek GCP-530 50 MHz/30A Current Probe Add to Cart
Sale $2,655.00
GDP-025 Instek GDP-025 25 MHz High Voltage Differential Probe Add to Cart
Sale $319.50
Data Sheet: PDF Document Icon (1.66 Mb)
Manual: PDF Document Icon (12.5 MB)
↑ Back to Top