- 100 MHz Bandwidth
- 2 Channels
- 3.5ns rise time
- 7” LCD WVGA Display
- 10M/Ch Memory depth
- 1GS/s MAX.
- 50,000 wfm/s update rate
- 1M FFT
- LabVIEW Driver
- USB Host
The Instek GDS-1102B features 100 MHz bandwidth, with two analog input channels. The maximum sampling rate for each single channel is 1GSa/s, and the memory depth is 10 Mpts per channel independently. The waveform update rate is 50,000wfms/s, which helps users to precisely observe the detailed waveform variation. Additionally, 7" WVGA color LCD display and the 256 color gradient display function together allow waveforms to be observed with the senses of transparency and gradation. With respect to the horizontal time scale adjustment knob and trigger level adjustment knob, GW Instek provides a very thoughtful design — the zero key function, which allows engineers to work more effectively.
Complete Technology Integration
For mathematical analysis mode, 1 Mpts FFT signal display makes the dull frequency domain signal analysis more delicate. Diversified trigger functions, X-Y mode analysis, and Go/NoGo function arm the GDS-1102B oscilloscope with higher level measurement technologies. The GDS-1102B oscilloscope also provides OpenWave connection software, which allows you to conduct waveform observation and data storage controlled by remote PC. Moreover, this oscilloscope features an innovative and compact design.
256-Color Gradient Display
With respect to the waveform display technology, the GDS-1102B oscilloscope is capable of displaying 256 color gradients which can delineate the profound gradational fluctuations — recreating the analog oscilloscope display capability. When a multi-layer video signal is input, the GDS-1102B, with 256 color gradient display, has the ability to precisely reveal the colored burst signal and to show details of layers with the brightness.
Data Log Function
The GDS-1102B oscilloscope has the data log function option, allowing you to observe and record waveform changes over a long period of time. The data log function can set data storage time and interval based on the test requirements. Record time can be set from five minutes to 100 hours, at intervals as short as five seconds. Data log formats include waveform and point data in CSV file and can be saved to USB, GDS-1102B or a remote computer via LAN.
|GDB-03||Instek GDB-03 Oscilloscope training kit for GDS3000||
|GTL-110||Instek GTL-110 BNC-BNC||
|GTL-246||Instek GTL-246 USB Cable 2.0 A-A Type||