Phone 800-517-8431

Instek GOM-802

DC Precision Milliohm Meter, 9 Ranges, 30 mOhm - 3 MOhm, 120V Line Input

Brand: Instek
Model No: GOM-802
Our Model No: GOM802
Condition: NEW
PDF Document Icon Data Sheet (522 KB)


Product Features:

  • 30000 Counts Display. High Accuracy 0.05%. 9 Ranges: 30 mOhms to 3 MOhms. 30 mOhm range with 1 mOhm resolution.
  • Hi/Lo Comparator and Limit Percent Setting. Measurement of REL, Actual and % Value.
  • Manual or Autoranging. Continuous or Triggered Measurement mode.
  • Temperature Compensation and Measurement. Four-Terminal Measurement Technique.
  • Auto-Recall Last Setting After Power OFF and ON again. Alarm Setting for PASS/FAIL.
  • 120V Line Input, for other configurations Please Call
  • For Product with GPIB and RS232 Option, Please see GOM-802GPRS

The Instek GOM-802 is a high-precision, manual and auto-ranging, programmable (with option) DC Milliohm meter suitable for low resistance measurements of switches, relays, connectors, PCB tracks and a variety of other low resistance devices. The Instek GOM802 supports 4-wire Kelvin resistance measurements for faster, consistent and accurate results. Last setting recall allows the last test setting used to be set at turn on.

The GOM802 has nine, measurement ranges from 30 milliohm to 3 Megaohm, a constant current source of 1 microamp to 1 Amp, an accuracy of 0.05%, 1 microohm resolution. The ability to choose between high measurement accuracy with 7 samples/sec (full scale at 30000) or high speed measurements with 30 samples/sec (full scale at 3000) allows the GOM-802 the flexibility to fulfill a number of different measurement roles.

A built-in, easy-to-use, comparator function (HI-LO-GO) allows upper and lower limits for pass/fail testing. The alarm buzzer can be used in conjunction with the comparator function. The flexible handler interface allows the monitoring of the status of the pass/fail testing. The relative feature enables the GOM-802 to easily compensate for any stray resistance. The handler interface outputs the status of PASS, FAIL, HI, LO, READY and EOT signals. Up to 20 different sets of HI-LO-GO settings can be stored to satisfy a number of different testing conditions.

The optional RS-232 and GPIB option (Instek model GOM-802GPRS) is available for computer control applications.

  • 1 - User manual
  • 1 - Power cord
  • 1 - Test lead GTL-108A
Model Description Buy Now Price
GOM-802GPRS Instek GOM-802GPRS Programmable DC Milliohm Meter, 9 Ranges, 30 mOhm to 3 MOhm, RS232C & GPIB, 120V Add to Cart


GTL-108A Instek GTL-108A Additional 4W Type Test Leads for GOM-801H/802, GSM-8255/8251 Add to Cart
Sale $66.00
GTL-232 Instek GTL-232 RS-232 Cable for GDS, GRS, SFG, LCR, PSM Add to Cart
Sale $8.36
PT-100 Instek PT-100 Temp Probe for GOM-802 Add to Cart
Sale $105.60
Data Sheet: PDF Document Icon (522 KB)
Manual: PDF Document Icon (1.53 MB)
↑ Back to Top