Innoventions Sync DIMMCHECK 168 SDRAM Adapter, Discontinued

• The Sync DIMMCHECK 168 adapter has a proprietary 125MHz SDRAM test engine with enough horsepower to fully and quickly test today's 100 MHz SDRAM at actual clock speeds.
• Supports all popular 168-pin SDRAM and standard DRAM DIMM modules - a total SDRAM and DRAM DIMM solution in one adapter.
• Automatic tests provide size, speed, type, and detailed structure information.
• Comprehensive Page Burst and Bank Interleave tests, with complex test pattern capabilities.
• Full SDRAM mode tests, including CAS latency of 1, 2, and 3, sequential/ interleave addressing mode, variable burst lengths, and single write mode.
• Support for Serial Presence Detect (SPD) data, includes reading, editing and programming.
• Sync DIMMCHECK 168 easily snaps onto the SIMCHECK II and will automatically be recognized by the tester without the need for user setup.

A new addition to the SIMCHECK II line provides a state-of-the-art solution for testing SDRAM and standard EDO/FPM DRAM 168-pin DIMM modules at an affordable price. The new Sync DIMMCHECK 168's patent-pending 125MHz test engine, as well as the SIMCHECK II line's 1nS technology, combine to achieve true 100MHz testing of your SDRAM modules.

SIMCHECK II automatically detects the presence of the Sync DIMMCHECK 168. Each tester also automatically determines if the tested module is SDRAM or standard DRAM.

In fact, you can test standard DRAM following an SDRAM, or vice versa, without the need of manual settings. Standard DRAM testing is similar to our regular DIMMCHECK 168P PRO in that all popular EDO/FPM/ECC 3.3V/5V buffered/unbuffered DIMMs are supported.

As SDRAM technology substantially differs from standard DRAM, the Sync DIMMCHECK 168 provides many new features and capabilities to provide comprehensive testing of your SDRAM modules.

The Sync DIMMCHECK bursts complex pattern tests, into and from the tested module, at a true 100Mhz synchronous rate. The automatic test provides the tested module's size, voltage, frequency, and type. The 125Mhz test engine verifies that the tested module can accept the various mode commands, including CAS latency of 1, 2, and 3, sequential, or interleave type bursts at different lengths, and the single write mode. It further verifies interleaved bank operation.

A summary screen provides final test information, including identification of the module as a 2 or 4 clock device.

Detailed structure information outlines the use of the DQMB and -S control signals in the tested module. All results are automatically recorded in the SIMCHECK test log, and can be viewed and printed on your PC.

The Serial Presence Detect (SPD) viewer allows you to fully view all 256 bytes of information, or it can be configured to display only the bytes employed by the module.

You can edit and reprogram the SPD from your PC using SIMCHECK's built-in serial interface. (Note that the PC Interface is NOT required for normal testing.)

As we continue to develop the Sync DIMMCHECK 168 test program, we plan to add more features and enhance those already implemented. To protect your investment, you can readily upgrade your SIMCHECK II firmware via the Internet at no charge.

Note: This adapter can be used only on SIMCHECK II. It cannot be supported by previous generation of SIMCHECK PLUS.