- Supports Burst Length of 2, 4, and 8.
- Supports CAS LATENCY of 2, 2.5, and 3.
- Clock frequencies (partial list): 200MHz, 224MHz, 248MHz, 260MHz,
- 266MHz, 280MHz, 300MHz, 316MHz, 333MHz, 400MHz, 433MHz and
466MHz.
- True 2.5V testing.
- Controlled Vtt for true STTL-2 compatibility.
- Parallel testing capability of 72-bits.
- Three controlled pairs of differential clocks for tested module.
- Automatic DQS8..0/DM8..0 or DQS17..0 support.
- Four -S control lines for up to 4-bank devices.
- The DDR adapter also includes fourteen A13..0 address lines and
three BA2..0 bank select address lines to support future 4GB modules.
- Support current module sizes of up to 2GB, with downloadable
firmware upgrade for future module size support.
|
 
Innovetions
RAMCHECK DDR
200-PIN
S.O. DIMM
Converter Shown
|
The RAMCHECK DDR 200-Pin Converter (p/n INN-8668-6-1) is a perfect low-cost
solution for testing modern laptop DDR memory. The converter plugs directly into
the 184-pin RAMCHECK DDR main adapter, providing you with fast, convenient
testing capabilities. Please note that you must have the DDR 184 Adapter in
order to use this converter.
This converter tests DDR SODIMM modules complying with current JEDEC standards.
It uses an inexpensive production socket found on PC motherboards, not the
heavy-duty Yamaichi test socket used on our other adapters.
The RAMCHECK tester automatically detects the presence of the converter
indicating "RAMCHECK DDR SERIES" during power on. The module size, structure,
and type are automatically detected, without the need for user's setup. Test
flow of the DDR modules follows our standard Basic Test, Extensive Test, and
Auto-Loop process. It is similar to the RAMCHECK test flow for SDRAM, so there
is no need for special training.
RAMCHECK
Adapters |
){kind=small}
