Phone 800-517-8431
HOME > IDEAL-NETWORKS > NETWORK-TROUBLESHOOTING > LANXPLORER > LANXPLORER-PRO-PREMIUM-R150001

IDEAL Networks R150001

LanXPLORER Pro Model GbE Ethernet Diagnostic Testing Kit

Brand: IDEAL Networks
Model No: R150001
Our Model No: R150001
Condition: NEW
PDF Document Icon Data Sheet (1.97 MB)
R150001

$3,650.67

Product Features:

  • Two RJ-45 ports for in-line testing, single SFP fiber optic test port (SFP modules optional) and Wi-Fi
  • Troubleshoot passive cabling and active networks
  • Touch-n-test user interface
  • Copper, fiber and Wi-Fi testing
  • Peak, instant, 30-second, and continuous bandwidth monitoring
  • PoE and PoE+ endpoint and in-line testing with load simulation
  • Device discovery and top-talker identification
  • Switch speed detection - 10/100/1000 Mb/s
  • Support for up to 12 wiremap remotes
  • Wi-Fi site survey @2.4GHz 802.11b/g/n
  • Top 10 bandwidth talkers and listeners
  • Discover IP address conflicts
  • Traffic statistics - network and devices
  • VLAN detection
  • Port identification using EDP/CDP/LLDP protocols
  • Generate test reports (PDF or CSV). Send test reports from your mobile device using the free IDEAL AnyWARE App

The IDEAL Networks R150001 LanXPLORER Pro is a hand held tester for analyzing and diagnosing problems in networks, cabling and Ethernet devices using copper, fiber and Wi-Fi interfaces.

Using the R150001 LanXPLORER Pro in-line and end point modes, IT Technicians can pinpoint issues that are unable to be found with management software as it physically connects to the point of interest instead of scanning the entire network.

The R150001 does not examine the contents of the data being analyzed therefore personal and confidential information will remain confidential.

Diagnostic reports can be saved in PDF format and shared with colleagues and clients using the free IDEAL AnyWare app and a mobile device.

Download on the App Store

Download IDEAL AnyWARE
for iOS Mobile Devices

Get on Google Play

Download IDEAL AnyWARE
for Android Mobile Devices

Voice over IP (VoIP) – Monitor Quality of Service (QoS) in real time using In-Line Mode.

Quality of Service (QoS) is measured in real time when the R150001 is connected in-line between a VoIP phone using SIP (Session Initiation Protocol) and the network. QoS metrics include jitter, delay, total packets, packet loss, source/destination IP addresses and port number. With standard SIP, signalling processes are shown including call pick up, phone number of both phones and duration.

Wi-Fi Testing – Resolve issues on your Wi-Fi network and reduce downtime

As well as using the Wi-Fi interface (2.4GHz 802.11 b/g/n) to connect and troubleshoot the network, the R150001 can perform a Wi-Fi site survey that displays the access point ID, signal strength, channel and encryption status. Quickly identify causes of slow Wi-Fi networks or connection issues, such as overlapping Wi-Fi channels or wrong SSID setup. Identify top wireless bandwidth consumers and total aggregate bandwidth consumption (overloaded access point) when connecting the LanXPLORER Pro between wireless access point and the network.

Ethernet Device Diagnostics and Troubleshooting using In-line Mode (Copper)

The in-line feature allows monitoring of network traffic between any two devices on the network to diagnose Ethernet issues that cannot be detected by software tools running on a PC or managed switch.

Top 10 Talkers and Listeners

Identifies top 10 bandwidth consuming devices (both transmitting and receiving) on the network to help troubleshooting, e.g. connect between core switch and the internet router to monitor total incoming and outgoing internet bandwidth consumption and identify top 10 bandwidth consuming devices.

Traffic Statistics

Monitor Min/Max/AVG throughput in Mb/s, packet count, frame size and Ethernet protocols.

VLAN Detection

Automatic detection of VLAN ID’s.

Network Diagnostic and Troubleshooting using End-Point Mode (Copper, fiber and Wi-Fi)

The end-point feature is used to monitor and examine the LAN when connected directly to a network port or a mirrored port.

NETMAP/NETVERIFY

This function performs a scan of your entire network to identify all active devices by IP address, MAC address and host name which can be saved and compared to future NETMAPs to identify new or removed network devices, or changes in network configuration.

Network Conflicts

Identifies source of network conflicts such as unintentionally adding DHCP servers or devices using duplicate IP addresses.

Network Discovery

Connect to active network ports or Ethernet devices to verify network status and connectivity.

  • Displays port ID of LLDP/CDP enabled switches to eliminate manual cable tracing
  • Check Ethernet connectivity at device location to 10/100/1000 Mb/s
  • Verify network configuration (device IP/gateway address/subnet mask)
  • Identify IP address/name of router and number of hops between network points with traceroute test
  • Troubleshoot devices by connecting directly to the Ethernet port to test operation, speed and duplex settings of the device
  • Ping local network devices such as DNS, gateway/router, file servers, network printers, wireless access points, etc. Test internet connectivity by pinging website URL’s, e.g. www.google.com to verify min, max and average response time

Rogue Devices

Identify devices that are generating network errors or degrading network performance, e.g. computers infected with malware creating broadcast storms that may disable or congest a network.

IEEE 802.1x

Use the 802.1X protocol to log onto networks secured by this standard, avoiding unnecessary security complications and lengthy project delays. (802.1X is a standard for port-based Network Access Control (PNAC))

Power over Ethernet (PoE) Testing

PoE Monitoring

Monitor PoE consumed by the device (voltage and current).

PoE/PoE+ Load Test

Performs PoE/PoE+ load tests to determine the maximum power available to a PoE device at its installed location.

IP Camera/CCTV Diagnostics and Troubleshooting using In-line Mode (Copper)

Connect between network and NVR (Network video recorder) to identify IP address, host name and bandwidth consumption of each camera. Connect between individual IP camera and the network to monitor bandwidth and power consumed using PoE.

Cable Testing (Copper and Fiber)

The R150001 offers a series of tests to aid troubleshooting

Copper Cabling Tests

  • Wiremap test for open, shorts, miswires and split pairs to TIA-568 standard
  • Distance to fault using TDR technology (copper only)
  • Ability to identify and trace cables with a compatible amplifier probe (62-164)
  • Port blink to visually trace cable from work area outlet to network switch

Fiber Cabling Tests

  • Optical power indication (with compatible SFP modules)
  • Port blink to visually trace cable from work area outlet to network switch
  • Check the fiber SFP characteristics including the vendor name, model number and optical power level
  • 1 - LanXPLORER PRO Test Unit
  • 1 - Remote Unit #1
  • 1 - High Sensitivity WiFi Antenna
  • 2 - 30cm Cat. 5E STP Patch Cables
  • 1 - Carrying Case
  • 1 - NiMH Battery Pack
  • 1 - Power Supply w/EU/UK Adaptor
  • 1 - Amplifier Probe (62-164)
  • 1 - RJ45 Insert Extraction Tool
  • 10 - Lifejack RJ45 Inserts
  • 1 - User Manual CD
  • 1 - Quick Reference
Model Description Buy Now Price
150050 IDEAL Networks 150050 #2-#12 Smart Remote Kit (11) for Network Testers Add to Cart
($360.40)
Sale $309.94
150053 IDEAL Networks 150053 Rechargeable NiMH Battery Pack for Network Testers Add to Cart
($43.39)
Sale $38.62
150054 IDEAL Networks 150054 #1 Smart Remote (1) for Network Testers Add to Cart
($36.72)
Sale $33.05
150055 IDEAL Networks 150055 12 ft. Patch Cables (2) for SignalTEK II & NaviTEK II Add to Cart
($35.00)
Sale $33.95
150056 IDEAL Networks 150056 2m MM Optical Fiber Cable for SignalTEK II & NaviTEK II Add to Cart
($35.00)
Sale $31.15
150057 IDEAL Networks 150057 2m SM Optical Fiber Cable for SignalTEK II & NaviTEK II Add to Cart
($35.00)
Sale $31.15
150058 IDEAL Networks 150058 RJ-45 Insert/Extract Tool (1) & Replaceable Lifejack Inserts (10) Add to Cart
($125.00)
Sale $111.25
151051 IDEAL Networks 151051 Power Adapter/Battery Charger for Network Testers Add to Cart
($112.28)
Sale $94.93
62-164 IDEAL Networks 62-164 Amplifier Probe w/Non-Conductive Tip & Adjustable Volume Add to Cart
($66.63)
Sale $57.30
MGKLX2 IDEAL Networks MGKLX2 1000BASE-LX 1000BASE-LX MM/SM Fiber Optic Option for Network Testers Add to Cart
($294.67)
Sale $253.42
MGKSX1 IDEAL Networks MGKSX1 1000BASE-SX Multimode Fiber Optic Option for Network Testers Add to Cart
($238.00)
Sale $214.20
MGKZX3 IDEAL Networks MGKZX3 1000BASE-ZX Single-Mode Fiber Optic Option for Network Testers Add to Cart
($476.00)
Sale $409.36
R150001W2 IDEAL Networks R150001W2 2 Year Warranty for LanXPLORER PRO Premium Add to Cart

$208.00

IDEAL LanXPLORER PRO GbE Ethernet Diagnostic Tester
IDEAL LanXPLORER PRO
GbE Ethernet Diagnostic Tester
Data Sheet: PDF Document Icon (1.97 MB)
Manual: PDF Document Icon (1.41 MB)
Quick Start Guide: PDF Document Icon (826 KB)
Brochure: PDF Document Icon (2.53 MB)
IDEAL AnyWARE Google Play App: Android app on Google Play
IDEAL AnyWARE iOS App: iOS App on iTunes
↑ Back to Top