|
Hioki 3193 multi-function power meter is for use with single phase power lines to 3-phase, 4-wire circuits. Accommodating up to 6 units, the unit is not only capable of measuring up to 6 single phase systems, but can simultaneously measure the input and output of a 3-phase inverter and provide effective power measurements. Additionally, it
supports harmonic analysis and flicker measurement(optional), features which are essential for overall device assessment. |
 
Hioki 3193 Shown
|
| Specifications |
| Measurement lines |
Single-phase/two-wires to three-phase/four-wires
(Through the use of various input units) |
| Measurement items |
(When using 9600 / 9601 / 9602, optional)
Voltage, current, voltage/current peak, effective/reactive/apparent
power, power factor, phase, frequency, current/power integration, load
rate, efficiency
(When using 9603, optional)
Voltage, torque, RPM, frequency, motor output
(When using 9605, optional)
Harmonic, waveform, voltage fluctuation / flicker measurement function
|
| Measurement ranges |
Voltage: 6.0000 V to 1.0000 kV (depends on use
of the input unit)
Current: 200.00mA to 500.00 A (depends on use of the input unit)
Power: Depends on combination of voltage and current ranges
|
| Integration range |
0 to ±999999 TAh/ TWh, (integration time up to 10000
hours)
|
| Basic accuracy used with 9600 to 9602 Input unit |
±0.1 % rdg. ±0.1 % f.s. (voltage, current, power, at 45
to 66Hz)
Note: When used together with the 9270 to 9272, and 9277 to 9279,
resulting accuracy is the sum of that indicated above and the accuracy
of these clamp-on sensors |
| Frequency characteristics |
used with 9600: DC, 0.5 Hz to 1 MHz
used with 9601: 5 Hz to 100 kHz
used with 9602: DC, 0.5 Hz to 200 kHz (depends on the clamp-on sensor
accuracy) |
| Signal output |
Analog level: Voltage, current, active power, 5
V DC f.s.
Waveform monitor: Voltage, current, 1 V rms f.s.
D/A output: Outputs 8 arbitrarily selected items, ±5 VDC f.s.
|
| Other functions |
6.4 inch TFT color LCD, RMS/MEAN rectification, FDD,
GP-IB/RS-232C interface, scaling, averaging |
| Power supply |
100/120/200/230 V AC (switched automatically), 50/60 Hz
|
| Dimensions (WxHxD) |
16.93" x 5.91" x 14.57" (430 mm x 150 mm 370 mm) |
| Weight |
33 lbs (15 kg) with all options |
|
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| 3193 |
Hioki 3193 Power Analyzer |
 |
$5,870.00 |
| Included Accessories |
| |
- 1 - Power cord
- 1 - Connector
|
Included |
| Optional Factory Install |
| Measurements cannot be taken without a factory installed input unit. Please select at time of purchase |
| 9600 |
Hioki 9600 AC/DC Direct Input Unit |
|
$2,340.00 |
| 9601 |
Hioki 9601 AC Direct Input Unit |
|
$1,590.00 |
| 9602 |
Hioki 9602 AC/DC Clamp Unit |
|
$1,830.00 |
| 9603 |
Hioki 9603 External Input Unit for 3193 |
|
$935.00 |
| 9604 |
Hioki 9604 Printer Unit |
|
$999.00 |
| 9605 |
Hioki 9605 Harmonics/Flicker Unit |
|
$2,250.00 |
| Optional Accessories |
| 9232 |
Hioki 9232 Recording Paper for the 3193 |
|
$99.95 |
| 9277 |
Hioki 9277 Universal Clamp On Probe (20A) |
|
$1,790.00 |
| 9278 |
Hioki 9278 Universal Clamp On Probe (200A) |
|
$1,790.00 |
| 9279 |
Hioki 9279 Universal Clamp On Probe (500A) |
|
$1,890.00 |
| 9709 |
Hioki 9709 AC/DC Current Sensor (DC - 100kHz 500A) |
|
$1,295.00 |
| 929010 |
Hioki 9290-10 Clamp On Adapter Up to 1500 Amp. |
|
$379.95 |
| CT6863 |
Hioki CT6863 AC/DC Current Sensor |
|
$1,440.00 |
|
){kind=small}
PDF
Help