- Comes with a GP-IB connection terminal
- Compatible with the SPECpower benchmark for server power consumption
- Complies with IEC62301 for electrical power consumption in standby mode and the ErP Directive or Energy Star standard
- High-precision +/- 0.1% basic accuracy (For complete details, please refer to the specifications)
- Wide 1mA to 20A measurement range, max. continuous input of 30 A
- Wide frequency bandwidth of 0.1 Hz to 100 kHz or DC
- Measure harmonic and standby power consumption according to IEC62301
- Achieve superior accuracy even with a low power factor for no-load testing of transformers and motors
- Synchronized control using up to 8 instruments
Single-Phase Power Meter with All-Round Capability
The Hioki PW333501 Power Meter is ideal for use in the development and production of solar panels and AC adapters, secondary-side DC equipment and inverters, and power converters such as thyristors. Equipped with multiple functions for computing a wide variety of items, the PW-333501 Power Meter can also be used alone for detailed analysis. It can also be used to find special parameters such as THD, CF, and MCR. The PW3335-01 Power Meter delivers a range configuration that lets you measure extremely low power levels with a margin to spare. Accuracy can be set from 10 μA and up for current, and 0 W and up for effective power. This model comes with a LAN and GP-IB connection terminal in the back of the power meter.
Peak value of up to 600% of the range, supporting crest factor of 6
Current waveforms in the switching power supply or at the primary-side of inverters become steep and often exceeds the fundamental range, preventing them from being accurately measured. The PW3335 resolves these issues by offering a crest factor of 6, allowing it to measure accurately even when the waveform peaks are high relative to its range.
Power data and harmonic data — all measured simultaneously
All measurement data are internally processed in parallel simultaneously. Even when waveforms have mixed AC/DC components – half-wave rectification waveforms for example – the individual components can be measured simultaneously. The PC communication application further enables 180 or more measurement parameters to be acquired simultaneously.
Built-in harmonic measurement
The PW3335 measures harmonics up to the 50th order. Use it for evaluation and development of power sources for home appliances and other electrical equipment. Simultaneously display the effective voltage and total harmonic distortion (THD) on the screen. For THD computation, any maximum harmonic order can be specified.
MAX/MIN hold function for spotting current peaks at a glance
Capture maximum and minimum values such as inrush current waveform peak values and maximum consumed power.
Rich interfaces and extensibility
PC communication software: By using the bundled PC application, you can control the power meter from a PC without needing to code your own communication program. The software enables you to save data to the PC, display waveforms, and perform efficiency calculations, etc. - Compatible with LAN and GP-IB
Up to 8 units of simultaneous control
Use the simultaneous control feature for measuring input/output efficiency of the power source equipment, for making comparisons between multiple equipment, or for simultaneous parallel testing of production lines and achieve measurement with guaranteed synchronization. Efficiency computation is also possible in conjunction with PC software. Synchronization with both the Hioki PW3336 and PW3337 Power Meters is also supported.
|9660||Hioki 9660 Clamp On Sensor, 100A Voltage Output, for Current Load Measurements||
|9661||Hioki 9661 Clamp On Sensor, 500AAC Voltage Output, for Current Load Measurements||
|9669||Hioki 9669 Clamp On Sensor, 1000AAC Voltage Output, for Current Load Measurements||
|9272-10||Hioki 9272-10 100 kHz/20-200A AC Current Probe||
|CT6862||Hioki CT6862 50 A AC/DC High Precision Current Sensor, DC to 1 MHz||
|CT6863||Hioki CT6863 200 A AC/DC High Precision Current Sensor||
|9709||Hioki 9709 High Precision AC/DC Current Sensor (DC - 100kHz 500A)||
|9637||Hioki 9637 RS-232C Cable, PC, 9 pin - 9 pin, for the 3153||
|9638||Hioki 9638 RS-233C Cable, PC, 9 pin - 25 pin, for the 3153||
|9151-02||Hioki 9151-02 GP-IB Connector Cable (2 Meter)||
|9642||Hioki 9642 Straight Ethernet Cable (5m)||
|9165||Hioki 9165 Connector Cable, (BNC-BNC)||
|Data Sheet:||(2.71 MB)|