- Compatible with the SPECpower benchmark for server power consumption
- SPECpower is a registered trademark of Standard Performance Evaluation Corporation
- Measure DC, and single-phase 2-wire to 3-phase 4-wire with 3-channel input
- For development and production of motors, inverters, power conditioners, power supplies, and other devices
- High-precision basic accuracy of ±0.1 %
- Wide frequency bandwidth of 0.1 Hz to 100 kHz or DC
- High-current measurement up to 65 A of direct input
- Harmonic measurement up to the 50th order according to IEC 61000-4-7
- High-accuracy measurement, even with a low power factor for no-load testing of transformers and motors
- Built-in external sensor input terminals to measure up to 5000 A AC
- Synchronize up to 8 units for multi-unit measurement
The Hioki PW3337 Power Analyzer measures power on the full range of electrical equipment, from single-phase devices such as battery-driven devices and household electronics to industrial use and three-phase electrical equipment over 3 input channels. The power meters provide coverage from DC to inverter frequencies with support for voltages up to 1000 V.
Measurement accuracy that remains unchanged for high-current measurement
Accuracy is guaranteed for currents of up to 65 A with direct input. The PW3337 can also measure high currents in excess of 65 A with optional current sensors. Direct-input power meters typically exhibit degraded accuracy when inputting high currents due to shunt resistor self-heating. However, the PW3337 reduces input resistance with a DCCT design that virtually eliminates this type of accuracy degradation.
Simultaneous processing of power data and all harmonic data
All data, including RMS values, mean values, DC components, AC components, fundamental wave components, harmonic measurement, and integration measurement, is processed in parallel internally. There is no need to switch modes depending on whether you wish to acquire power data or harmonic data - simply switch the display to obtain measured values with true simultaneity. Additionally, PC communications software can be used to capture measurement data, including from multiple synchronized instruments.
Wide frequency band of DC and 0.1 Hz to 100 kHz
Thanks to a wide-band capability extending from DC and 0.1 Hz to 100 kHz, the PW3337 can cover not only inverters' fundamental frequency band, but also the carrier frequency band.
Integrating fluctuating power values
The power consumption of equipment subject to a fluctuating load, for example refrigerators, heaters, and pumps, varies considerably between rated operation and no-load operation. Thanks to its broad dynamic range, the PW3337 can perform integrated power measurement with guaranteed accuracy using a single range, even if the power fluctuates dramatically during integration. Measurements can accommodate waveform peaks of up to 600% of the range rating.
The PW3337 Communicator connects with the power meters via the LAN or RS-232C interface, and is available for free download. Functionality includes configuring instruments, capturing interval data, performing numerical calculations based on measurement data, calculating efficiency values across multiple units, displaying 10 or more measurement parameters, and displaying waveforms.
|9660||Hioki 9660 Clamp On Sensor, 100A Voltage Output, for Current Load Measurements||
|9661||Hioki 9661 Clamp On Sensor, 500AAC Voltage Output, for Current Load Measurements||
|9669||Hioki 9669 Clamp On Sensor, 1000AAC Voltage Output, for Current Load Measurements||
|9272-10||Hioki 9272-10 AC/DC Current Sensor, 200A, Split Core, with PL23 10-Pin Adapter||
|CT6862||Hioki CT6862 AC/DC Current Sensor, 1000A, Solid Core, with PL23 10-Pin Adapter||
|CT6863||Hioki CT6863 AC/DC Current Sensor, 200A, Solid Core, with PL23 10-Pin Adapter||
|9709||Hioki 9709 AC/DC Current Sensor, 500A, Solid Core, with PL23 10-Pin Adapter||
|CT6865||Hioki CT6865 AC/DC Current Sensor, 1000A, Solid Core, with PL23 10-Pin Adapter||
|L9217||Hioki L9217 Connection Cord with Insulated BNC Connectors, 5.25 ft. (1.6 m) Length||
|9637||Hioki 9637 RS-232C Cable for PC, 9 pin - 9 pin, Cross, 5.91 ft. (1.8 m) Length||
|9638||Hioki 9638 RS-233C Cable, PC, 9 pin - 25 pin, for the 3153||
|9151-02||Hioki 9151-02 GP-IB Connector Cable (2 Meter)||
|9642||Hioki 9642 Straight Ethernet LAN Cable, 16.41 ft. (5 m) Length||
|9165||Hioki 9165 Connector Cable, (BNC-BNC)||
|Data Sheet:||(4.96 MB)|