- LCR measurement, DCR measurement, sweep measurement, continuous measurement and high-speed testing achieved with one instrument
- High-speed testing, achieving maximum speeds of 1.5ms (1 kHz) and 0.5ms (100kHz) in LCR mode
- High-accuracy measurements, basic accuracy of Z parameter: ± 0.08%
- Perfect impedance analyzer for testing the resonance characteristics of piezoelectric elements, C-D and low ESR measurement of functional polymer capacitors, DCR and L-Q measurement of inductors (coils and transformers)
- Perform frequency sweeps, level sweeps, and time interval measurements in analyzer mode
|
 
Hioki IM3570 Shown
|
With this new IM3570 Impedance Analyzer, an LCR meter and an impedance analyzer capable of measurement frequencies of 4 Hz to 5 MHz and test signal levels of 5 mV to 5 V have been combined into one measuring instrument. Advanced capabilities include LCR measurement with AC signals, resistance measurement with direct current (DCR), and sweep measurement which continuously changes the measurement frequency and measurement level.
The IM3570 facilitates high-speed continuous measurement under different measurement conditions and measurement modes, so inspection lines which up to now have required multiple measuring instruments can be equipped with just one device. |
| Specification IM3570 |
| Measurement modes |
LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode |
| Measurement parameters |
Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q |
| Measurement range |
100 mΩ to 100 MΩ, 12 ranges (All parameters are determined according to Z) |
| Display range |
Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ±(0.000000 [unit] to 9.999999G [unit], Absolute value display for Z and Y only
θ : ±(0.000° to 999.999°), D : ±(0.000000 to 9.999999)
Q : ±(0.00 to 99999.99), Δ % : ±(0.0000% to 999.9999%) |
| Basic accuracy |
Z : ±0.08%rdg. θ: ±0.05° |
| Measurement frequency |
4 Hz to 5 MHz (10 mHz to 100 Hz steps) |
| Measurement signal level |
V mode/CV mode (normal mode):
50 mV to 5 Vrms, 1 mVrms steps (up to 1 MHz),
10 mV to 1 Vrms, 1 mVrms steps (over 1.0001 MHz)
CC mode (normal mode):
10 μA to 50 mArms, 10 μArms steps (up to 1 MHz)
10 μA to 10 mArms, 10 μArms steps (over 1.0001 MHz) |
| Output impedance |
Normal mode: 100 Ω
Low impedance high accuracy mode: 10 Ω |
| Display |
5.7-inch color TFT, display can be set to ON/OFF |
| Measurement time |
0.5 ms (100 kHz, FAST, display OFF, representative value) |
| Measurement speed |
FAST/ MED/ SLOW/ SLOW2 |
| Functions |
DC bias measurement, Comparator, Panel loading/saving, Memory function |
| Interface |
EXT I/O, RS-232C, GP-IB, USB communication, USB memory, LAN |
| Power supply, consumption |
90 to 264 V AC, 50/60 Hz, 150 VA max. |
| Dimensions, mass |
330 mm (12.99 in) W × 119 mm (4.69 in) H × 307 mm (12.09 in) D, 5.8 kg (204.6 oz) |
|
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| IM3570 |
HIoki IM3570 Impedence Analyzer |
 |
$9,995.00 |
| Included Accessories |
| |
|
Included |
| Optional Accessories |
| Probe and Test Fixtures |
| L2000 |
Hioki L2000 Test Leads, Four Terminal. DC to 5 MHz, 1 Meter |
|
$1,099.00 |
| 9262 |
Hioki 9262 Test Fixture (Direct Connection Type) |
|
$615.00 |
| 9263 |
Hioki 9263 SMD Test Fixture (Direct Connection Type) |
|
$1,225.00 |
| 9677 |
Hioki 9677 SMD Test Fixture for LCR |
|
$1,395.00 |
| 9699 |
Hioki 9699 Test Fixture |
|
$1,635.00 |
| PC Communication |
| 915102 |
Hioki 9151-02 GP-IB Connector Cable (2 Meter) |
|
$399.00 |
| Printer |
| 9638 |
Hioki 9638 RS-233C Cable (9pin to 25pin/cross/1.8m) |
|
$62.95 |
| 9237 |
Hioki 9237 Box 4 rolls/box |
|
$99.00 |
|
)
PDF Help