<< Hioki LCR and Capacitance MetersHioki 3535
LCR HiTester
|
- Broad Frequency Measurement Range
- 6ms Minimum Measurement Time
- 14 Parameter Types
- Detachable Head Lamp (Not Included)
- Adjust For Conditions While Measuring
- Store Measurement Data
- Zoom Display
- Optional Printer Output (9442)
- BIN (Classification) Measurement
- Continuous Measurements
- Load Compensation Function
- Correlation Compensation Function
- Simultaneously Measure Up To 4 Parameters
|
 
Hioki 3535 Shown
|
|
|
|
The Hioki 3535 LCR HiTESTER measures across the broad frequency range
of 100kHz to 120MHz. The 6ms high-speed measurement capability is
particularly useful with the built in comparator, load functions and BIN
(classification) measurements. Achieve measurement flexibility by
detaching the head amp unit fromt he main unit and placking it in proximity
to the test object so as to minimize the effect of test leads on
measurements.
|
|
|
|
Specifications |
|
Measurement
Items |
|Z|,
|Y|, Q, Rp, Rs(ESR), G, X, B, Θ, Ls, Lp, Cs, Cp, D(tan δ) |
|
Measurement Ranges |
| |
1kΩ range |
10kΩ range |
100kΩ range |
| Z, R |
100mΩ to 2kΩ |
1kΩ to 20kΩ |
10kΩ to300kΩ |
| C |
0.66pF to 15.9µF |
0.066pF to 1.59nF |
4.4fF to 159pF |
| L |
0.133nH to 3.18mH |
1.33µH to 31.8mH |
13.3µH to 477mH |
| Θ |
-180.00° to 180.00° |
|
|
Measurement Frequency |
100 kHz to 120 MHz ( 100Hz to 100kHz steps ) |
|
Basic Accuracy |
|Z|: ±0.5 % rdg.
Phase angle: ±0.3° |
|
Output Impedance |
50 ±10Ω (at 100 kHz) |
|
Measurement Signal Level |
5 mV to 1 V: 20 mA max. ( up to 10.00
MHz )
5 mV to 500 mV: 10 mA max. ( above 10.01 MHz )
Setting Resolution: 1mV steps
200 µA to 20 mA: 1 V max. ( up to 10.00 MHz )
200 µA to 10 mA: 0.5 V max. (above 10.01 MHz)
Setting Resolution: 10 µA steps |
|
Measurement Time |
6 ± 1 ms (nominal) |
|
Interfaces |
GP-IB, RS-232C and EXT I/O ( standard
) |
|
Power |
100 to 240 VAC, 50/60 Hz, 50 VA |
|
|
|
|
|
)
PDF
Help