Hioki 3511-50
LCR HiTESTER

Minimum Measurement Time Of 5 ms
High Resolution And High Measurement Accuracy
Built-in Comparator
RS-232C Interface As Standard Feature
External I/O Connectors:
- Outputs:
  - Internal DC Power
  - Comparator Result
  - Analog Measurement Completion
  - End-Of-Measurement
- Inputs:
  - External DC Power Supply
  - External Trigger Signal
  - Memory Setting Selection
Memory For 99 Sets Of Measurement Conditions
Compact Size

Hioki 3511-50 Shown

Product Information
Datasheet	319 KB
PDF Help

Hioki 3511-50 LCR HiTESTER features both high performance and high speed measurements with a low price. The minimum measurement time of 5 ms and a basic accuracy of ±0.08% makes the instrument suitable for use on production lines and laboratories. The built-in high speed comparator significantly reduces production line tact time and allows the construction of automatic production lines. The compact body features a clearly visible LED display that facilitates easy operation and allows settings to be confirmed at a glance

Specifications
Measurement Frequency (±0.01%)	120 Hz	1 kHz
Measurement Parameters	\|Z\|, C, R, θ, D, Q *Five Possible Display Combinations: \|Z\|-θ, C-D, L-D, L-Q, R
Measurement Time	Fast: 13 ms Normal: 80 ms Slow: 400 ms	Fast: 5ms Normal: 60 ms Slow: 300 ms
Measurement Ranges: \|Z\|, R	10 mΩ to 200.00 MΩ
C	9.40 pF to 999.99 mF	0.940 pF to 99.999 mF
L	14.00 μH ~ 200.00 kH	1.600 μH ~ 20.000 kH
θ	-90.00° to +90.00°
D	0.0001 to 1.9900
Q	0.85 to 999.99
Basic Accuracy	Z: ±0.8% rdg. θ ± 0.05°
Measurement Signal Levels	50 mV/500 mV/1 V rms (±10% ± mV)
Equivalent Circuit Mode	Serial and Parallel Equivalent Circuit Mode, Automatic/Manual
Output Impedance	50Ω
Display Method/ Max. Count	LED (5-digit display, full-scale count depends on range)
No. Of Measurement	Max. 99 (Including Comparator Conditions)
Comparator Comparison Method	Any of the main parameters (any of \|Z\| or C or L or R) and sub-parameters (any of θ or D or Q) can be set to upper limit and lower limit value settings. The measurement results are signaled by LED indication and a buzzer and EXT I/O output (main and sub parameter evaluation results, and output)
DC Bias	Possible when the optional 9268 (±40 V max.) or 9269 (± A max) is used
External Printer	9442 Printer (option)
External Interfaces	RS-232C, (GP-IB is option), EXT I/O for sequence use

Ordering Information
Model	Description	Buy Online	Price
351150	Hioki 3511-50 LCR HiTester		$1,549.49 (Reg. $1,699.00)
Included Accessories
	1 - Power Cord 1 - Spare Power Fuse	Included
Options
Test Fixtures are Not Included
9140	Hioki 9140 Four Terminal Probe for LCR		$213.90 (Reg. $230.00)
9143	Hioki 9143 Pincher Probe for LCR		$460.35 (Reg. $495.00)
9261	Hioki 9261 Test Fixture for LCR		$641.70 (Reg. $690.00)
9262	Hioki 9262 Test Fixture (Direct Connection Type)		$390.60 (Reg. $420.00)
9263	Hioki 9263 SMD Test Fixture (Direct Connection Type)		$827.70 (Reg. $890.00)
9268	Hioki 9268 DC Bias Voltage Unit for LCR		$510.57 (Reg. $549.00)
9269	Hioki 9269 DC Bias Current Unit for LCR		$510.57 (Reg. $549.00)
9165	Hioki 9165 Connector Cable (BNC-BNC)		$32.55 (Reg. $35.00)
9166	Hioki 9166 Connector Cable (BNC-Clip)		$32.55 (Reg. $35.00)
951801	Hioki 9518-01 GP-IB Interface		$426.87 (Reg. $459.00)
915102	Hioki 9151-02 GP-IB Connector Cable (2 Meter)		$278.07 (Reg. $299.00)
915104	Hioki 9151-04 GP-IB Connector Cable (4 Meter)		$278.07 (Reg. $299.00)
9442	Hioki 9442 Printer (Does Not Include: Interface Cable, Connection Cable and AC Adapter)		$591.89 (Reg. $649.00)
944303	Hioki 9443-03 Printer AC Adapter		$119.97 (Reg. $129.00)
9444	Hioki 9444 Connection Cable (for 9442)		$82.77 (Reg. $89.00)
1196	Hioki 1196, Recording Paper (for 9442 / 25m, 10 rolls)		$83.65 (Reg. $99.95)