<< Hioki Catalog
<< Hioki Current Probes |
Hioki 3276
DC to 100MHz Clamp on Current Probe |
- Wide-band, large current probe allows direct input to oscilloscope
- Wide band: DC to 100 MHz (-3 dB)
- High S/N characteristic enables measuring ultra low mA-range current waveforms
- Connects directly to oscilloscope BNC input terminal
- Connects directly to the MEMORY HiCORDER to provide waveform monitoring
- An optional power supply is available for use with oscilloscopes that do not provide probe power
|
 
Hioki 3276 Shown
|
| |
| Because current measurement requires
the insertion of a shunt or a CT, the task often becomes difficult due
to breaks in the electrical path. The Hioki 3276 Current Probe only
needs to be connected directly into the BNC input on waveform observation
equipment such as an oscilloscope or a recorder. Then simply clamp onto
the conductor to be measured to easily observe current waveforms under a
wide bandwidth and high sensitivity conditions. |
| |
| Specifications Hioki 3276 |
| Frequency Band Width |
DC to 100 MHz (-3 dB) |
| Rise Time |
=<3.5 ns |
| Noise Level |
2.5 mA rms max. (band width limited to 20 MHz) |
| Continuous Allowable Input |
30 A rms (requires derating at frequency) |
| Max. Allowable Peak Input |
50 A peak (non continuous) |
| Amplitude Accuracy |
±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to
30 A rms)
±2.0 % rdg. (DC, 45 to 66 Hz, 30 A to 50 A peak) |
| Output Rate |
0.01 V/A (use with a device having a 1 M-ohm input resistance or higher) |
| Max. Rated Voltage to Earth |
300 V CAT I |
| Core Jaw Dia. |
Ø5 mm(0.20 in) |
| Power Supply |
±12 V ±0.5 V, 5.3 VA |
| Dimensions |
175 mm (6.89 in)W × 18 mm (0.71 in)H × 40 mm (1.57 in)D, 240 g (8.5 oz), Sensor cable BNC terminal: 1.5 m (4.92 ft), Power cable: 1 m (3.28 ft), Power plug: FFA.0S.304.CLAC42Z / LEMO inc. |
|
| |
| Ordering Information
|
| Model |
Description |
Buy Online |
Price |
| 3276HIOKI |
Hioki 3276 100MHz 30A AC/DC Current Probe |
 |
$4,395.00 |
| Included Accessories |
| |
|
Included |
| Optional Accessories |
| 3269HIOKI |
Hioki 3269 Power Supply (Four Sensors) |
|
$1,460.00 |
| 3272HIOKI |
Hioki 3272 Power Supply (Single Sensor) |
|
$980.00 |
|
)
PDF Help