| Specification Hioki 3290-10 |
| Measurement Method |
DC, AC+DC (True RMS), AC (True RMS) |
| Peak Value Display |
Polarities independently (±peak value of waveform, in DC mode) |
| Separate AC from DC output |
None |
| Output (terminal 1) |
Current waveform or true RMS value (2 V / setting range) |
| Output (terminal 2) |
Current integral value (1 VDC / setting range) |
| Integral current measurement |
±, +, - integral, average value |
| Rate Measurement |
Operating time rate, total measurement time |
| Timer Settings |
99 hr, 59 min. (for repeated up to 20 times) |
| Data Storage |
Peak, integral value, operating time rate, or other |
| Basic Accuracy at DC Current |
20.00/ 100.0A (using the 9691 sensor): ±1.3 % rdg. ±0.10 A/ ±0.5 A
20.00/ 200.0A (using the 9692 sensor): ±1.3 % rdg. ±0.10 A/ ±0.5 A
200.0/ 2000A (using the 9693 sensor): ±1.8 % rdg. ±1.0 A/ ±5 A |
| Basic Accuracy at AC Current (45 to 66 Hz) |
20.00/ 100.0A (using the 9691 sensor): ±1.3 % rdg. ±0.08 A/ ±0.3 A
20.00/ 200.0A (using the 9692 sensor): ±1.3 % rdg. ±0.08 A/ ±0.3 A
200.0/ 2000A (using the 9693 sensor): ±1.3 % rdg. ±0.8 A/ ±3 A |
| Voltage measurement |
None |
| Frequency Measurement |
1.00Hz to 1000Hz, Basic accuracy: ±0.3% rdg. ±1dgt. |
| Crest factor |
2.5 or later, or rated peak value of sensor |
| Frequency Characteristic |
DC, or 1 Hz to 1 kHz (accuracy guaranteed range) At monitor output: based on the using sensor |
| Other Functions |
Selectable of responce time, filter (fc=550 Hz) |
| Power Supply |
LR6 (AA) alkaline batteries × 4, Continuous use : 22 hr, or AC adapter 9445-02/-03 (The 3290-10 only: external power supply possible) |
| Dimensions, mass |
155 mm (6.10 in) W × 98 mm (3.86 in) H × 47 mm (1.85 in) D, 545 g (19.2 oz) |
)
PDF Help