Hioki BT3563
6V/60V/300V Battery HiTester

Hioki BT3563 Shown

Product Information
Datasheet	2.3 MB
PDF Help

High-voltage battery pack testing up to 300V
Ideal for high-precision cell voltage measurements (accurate to 0.01% of reading)
Ranges from 3 mΩ to 3000 Ω support coin-size to large-cell batteries
Battery module testing
Measurement circuitry employs enhanced current regulation
Fast 10 ms response and 8 ms sampling time for high-speed measurements
Large (low-resistance) cell testing
High-speed mass production testing of coin batteries
Fuel cell stack measurements
Battery research and development measurement applications
Choice of PC interfaces for full remote operation

The Hioki BT3563 6V/60V/300V Battery HiTester support simultaneous high-speed measurement of internal resistance (IR) and battery voltage (OCV) for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications.

Advanced Functions

Four-Terminal AC Method
The four-terminal, 1-kHz AC method uses four contact probes to measure resistance independently of that of the measurement leads.
Measurement Error Detection
Detects test probe contact failure and broken leads, for 100% measurement reliability.
Self-Calibrating
Minor drift and gain fluctuations within the internal measurement circuitry are automatically corrected to maintain high accuracy.
Averaging Function
Stable readings can be consistently obtained by averaging two to 16 measurements.

Features of Battery HiTester Series

High Precision
- Resistance: ±0.5% rdg. ±5 digit
- Voltage: ±0.01% rdg. ±3 digit
High Resolution
- Resistance: 0.1 µΩ (3 mΩ range)
- Voltage: 10 µV (6 V range)
Quick Response
- Resistance & Voltage Simultaneous measurements within 18 ms
The 3 mΩ range (with 0.1 µΩ resolution) is ideal for testing ever lower-resistance large cells
The 6 V range (with 10 µV resolution and 0.01% accuracy) is ideal for the high-precision voltage measurements required for cell testing
Provides high-speed measurement of high-voltage battery packs, for improving productivity

High Speed Interfaces
The fastest 10 ms measurement data can be transferred via the standard RS-232C interface at up to 38,400 bps. Models with the -01 suffix include a GP-IB interface.

Handler Interface
Triggering, measurement configuration loading, and zero adjustment can be externally controlled. Output signals provide comparator results, end-of-measurement events, and measurement errors.

Analog Output

Analog Output Specs
Output contents	Measured resistance
Output rate	0 to 3.1 V DC
Resolution	12 bits
Response time	10 ms

The Hioki BT3563-01 provide analog output of resistance measurement values. This is convenient for combining re-corded data from multiple locations or of various data types, such as for logging long-term measurements and for fuel cell evaluation.

Specifications
Measurement types	Resistance and voltage
Resistance measurement method	Four-terminal AC (1-kHz) method
Rated voltage	±300V DC rated input voltage ±300V DC maximum rated voltage to ground
Input resistance	3mΩ/30mΩ/300mΩ ranges: Approx.90k Ω3Ω/30Ω/300Ω/3000Ω ranges: Approx.1MΩ
Sampling rate	Four steps – Extra Fast, Fast, Medium or Slow
Response time	Approx. 10 ms for measurements Note: Response time depends on reference values and the measurement object.
Total measurement time	Sampling time + Response time
Zero-adjustment	1000-count range (both resistance and voltage)
Triggering	Internal or external
Delay time	On/off, 0 to 9.999 seconds
Averaging samples	On/off, 2 to 16 samples
Statistical calculations	Total data count; valid data count; maximum, minimum and average values; standard deviation; population standard deviation and process capability indices
Measurement value output function	Measurement values are output via RS-232C upon trigger input
Measurement value memory	Up to 400 measurements
Panel save/load	Up to 126 configuration settings Save Frequently Used Settings in Memory: Measurement function, resistance measurement range, auto-range setting, zero-adjust setting data, sampling rate, trigger source, delay setting, averaging and comparator settings, statistical calculation setting, display switching and key-lock.
Analog Output	Measured resistance (displayed value, from 0 to 3.1 V DC)
External interface	External I/O, RS232C (9600, 19200 or 38400 bps), Printer RS-232C GP-IB available on BT3562-01
Other functions	Over-range display, measurement error detection, self-calibration, dual comparators, key-lock

Ordering Information
Model	Description	Buy Online	Price
BT3563	Hioki BT3563 6V/60V/300V Battery HiTester		$3,595.00
Included Accessories
	1 - Power Cord 1 - User Manuals	Included

Test Leads
928710	Hioki 9287-10 4 Terminal Test Lead		$199.00
9453	Hioki 9453 4 Terminal Probe for 3555		Sale $125.10 (Reg. $139.00)
9454	Hioki 9454 Zero Adjustment Board		$62.00
9467	Hioki 9467 Large Clip 4 Terminal Probe		$210.00
9770	Hioki 9770 Pin Type leads		$394.00
9771	Hioki 9771 Pin Type Test Lead for 3540, 3541, 3560		$578.00
Cables
915102	Hioki 9151-02 GP-IB Connector Cable (2 Meter)		$399.00
9637	Hioki 9637 RS-232C Cable (9pin-9pin/cross/1.8m)		$47.95
9638	Hioki 9638 RS-233C Cable (9pin to 25pin/cross/1.8m)		$62.95
Printer
9237	Hioki 9237 Box 4 rolls/box		$99.00
9638	Hioki 9638 RS-233C Cable (9pin to 25pin/cross/1.8m)		$62.95