- GPIB and Analog Output
- Measure high-voltage battery packs up to 300V
- Production line testing of high-voltage battery packs and battery modules
- Large (low-resistance) cell testing
- Choice of PC interfaces for full remote operation
- Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user.
The Hioki BT3563-01 benchtop battery tester supports simultaneous high-speed measurement of internal resistance and battery voltage for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications. The BT356301 battery internal resistance tester can measure the voltage and resistance of battery modules, high voltage battery packs, fuel cell stacks and other large batteries up to 300V.
High Precision - High Resolution - Quick Response
- Resistance: +/- 0.5% rdg. +/- 5 dgt.
- Voltage: +/- 0.01% rdg. +/- 3 dgt.
- Resistance: 0.01 uΩ (300 mΩ range)
- Voltage: 10 uV (6 V range)
- Resistance and Voltage: Simulaneous measurement within 18ms
Simultaneous Resistance & Voltage Judgments
Resistance and voltage can be simultaneously judged Hi/IN/Lo by independent comparators. Judgment results are provided on the display, beeper, and external I/O. The display allows confirming both results at a glance.
Resistance Comparator Setting
Voltage Comparator Setting
Composite Judgment Result Output
External I/O provides both separate and combined outputs of resistance and voltage judgment results, so composite results can be monitored.
The BT3563-01 provides analog output of resistance measurement values. This is convenient for combining recorded data from multiple locations or of various data types, such as for logging long-term measurements and for fuel cell evaluation.
|9772-90||Hioki 9772-90 Replacement Tip Pin for the 9772||
|L2100||Hioki L2100 Pin Test Lead for BT3562 & BT3563||
|9453||Hioki 9453 4 Terminal Probe for the 3555||
|9467||Hioki 9467 Large Clip Leads||
|9770||Hioki 9771 Pin Type Test Lead, 1.8 mm dia. Single-Axis Type for the 3561 and 3555||
|9771||Hioki 9771 Pin Type Test Lead, 0.2 mm Parallel Pyramid-Type for the 3561 and 3555||
|L2107||Hioki L2107 Clip Type Lead||
|9454||Hioki 9454 Zero Adjustment Board||
|9151-02||Hioki 9151-02 GP-IB Connector Cable (2 Meter)||
|9637||Hioki 9637 RS-232C Cable for PC, 9 pin - 9 pin, Cross, 5.91 ft. (1.8 m) Length||
|9638||Hioki 9638 RS-233C Cable, PC, 9 pin - 25 pin, for the 3153||