Hart Scientific 5616
NIST-traceable Secondary PRT Sensor Probe

• Temperature range: –200 °C to 420 °C
• Excellent stability: ±10mK
• Reference-grade platinum sensing element
• NIST-traceable calibration included
• The 5616-12 is a 100-ohm platinum resistance thermometer (PRT) with excellent short-term repeatability
• Short-term repeat-ability better than ± 0.010 °C (± 0.004°C is typical)
• Specified to drift no more than ±0.010°C at the triple point of water when exposed up to its maximum temperature (420°C) for 100 hours
• Sealed INCONEL® 600 sheath is 298 mm (11.75 in) long and 6.35 mm (0.250 in) in diameter
• Teflon®-jacketed cable is made of silver plated copper that ends with four-wire leads, which eliminate the effects of lead-wire resistance on measurements

The 5616-12 is a 100-ohm platinum resistance thermometer (PRT) with excellent short-term repeatability and comes with an unaccredited NIST-traceable calibration.

The temperature range of the 5616 covers –200°C to 420°C, and its high-purity platinum element and durability make it great for calibrating in the lab or in the field. When choosing a reference with a platinum element, there are two things you want to look at carefully: the short-term repeatability and the long-term drift. When PRTs are thermally cycled over their temperature range as they would be during a calibration, their resistance at the triple point of water can move up and down within an expected range. Hart Scientific defines this range (called “short-term repeatability”) as the repeatability at the triple point of water during three ther-mal cycles. 5616s are among the best performing in their class with short-term repeat-ability better than ± 0.010°C (± 0.004°C is typical). In addition, the 5616 is specified to drift no more than ±0.010°C at the triple point of water when exposed up to its maximum temperature (420°C) for 100 hours. These specifications are given at k=3 and therefore include a 99.8 % confidence level.

The 5616’s sealed INCONEL® 600 sheath is 298 mm (11.75 in) long and 6.35 mm (0.250 in) in diameter. The probe’s Teflon®-jacketed cable is made of silver plated copper that ends with four-wire leads, which eliminate the effects of lead-wire resistance on measurements.

Use the 5616 with Hart’s 1560 Black Stack, 1529 Chub-E4, or 1502A Tweener thermometer readouts.

Each sensor comes with a manufacturer’s report of calibration. The report includes the expanded uncertainty (k=2) at seven calibration temperature points, ITS-90 calibration coefficients, and a temperature vs. resistance table presented in 1 °C increments. Compare the 5616 to other Secondary Reference PRTs. You’ll like its price, but you’ll love its performance.