<< Hamlet Audio/Video Multi-format Monitors
Hamlet DS9000 Digi Scope
Auto Sensing Multi-Standard Waveform,
Vector and Audio unit
|
- Worlds first modular HD/SD SDI /composite 1U rack
measuring instrument
- Easy access to full waveform and vector functionality:
Parade (YCrCb), 2H, H, Hmag, 2V, V, Vmag, Full field line
select, Bow tie, Ext - ref, HFT™ - (Hands Free Timing™) and
Filtering
- V, H and Phase cursors for accurate measurement &
reporting
- Data and gamut analysis, time code logging of assigned
errors
- Colored displays of waveforms, vectors, audio bar graphs
and phase display
- Select audio source, bar graph type, peak hold,
de-emphasis
- Split tile layout, picture display in 4:3 or 16:9
- Three input module slots
- Output to DVI or XVGA monitor, 1024 x 768 @ 60Hz digital
or analogue monitor, via a DVI-I socket.
- Audio output jack
- Operator and factory store and recall presets
- Patented proprietary 10 bit processing of all signals
- Computer remote IP control via, up/downloads data via
USB/RJ45
- 12 VDC powered, mains adapter included
|
 
Hamlet DS9000 Shown
|
|
|
The Hamlet DS9000 DigiScope is a 1U rack mountable, low power device
with DVI and XVGA outputs for use on external displays. This makes this
an ideal alternative and/or a replacement for broadcast measuring
devices in production or engineering environments, especially where
repetitive monitoring or measurements are needed. Areas such as, master
control, pre or post-production, remote sites and OB vehicles. Indeed
anywhere serial digital signals or multi-format measurement is required.
The DS9000 DigiScope is a modular instrument so it is easy for the user
to upgrade at any time. It’s capable of measurement and monitoring
SD-SDI and composite video signals and audio in its embedded, or AES/EBU
formats. The HD/SD serial input connection is made to the centre
gold plated BNC socket, which is internally terminated at 75 ohms. The
left BNC provides an equalized output of the input feed and the right
BNC allows an external timing reference or AES audio signal to be input.
|
|
The separate modules are simple to exchange in the FlexiScope, MicroFlex, MonitorScope
9000 and DigiScope 9000. To exchange said modules, the user has to start
by removing 2 screws and pull the module out of
the main frame. Afterwards, the user inserts the new module and
re-inserting the 2 screws. |
|
|
|
Specifications |
Description |
|
Inputs with
HD-SD Module |
|
SD/HD digital input: |
BNC connector. Input impedance 75 ohms. |
|
Max d.c. +/- 10V |
|
SMPTE 259M serial digital at 800mV p/p |
|
SMPTE 292M high definition serial digital
at 800mV p/p |
|
Auto equalized up to 350 meters of
cable at 270mb/s |
|
Auto equalized up to 140 meters of cable
at 1.485Gb/s |
|
SD/HD digital Output: |
BNC connector. Output impedance 75 ohms. Equalized version of the serial digital
input. |
External reference/ AES input:
|
BNC connector |
Input impedance 75 ohms |
|
Max dc +/- 3 volts |
Video 0.5 to 2.0V p/p |
|
Digital Audio min 150mV p/p, max 3V p/p
conforming to S/PDIF, AES3, IEC60958 or EIAJ CP1201 |
|
Additional Notes |
Digital Audio min 150mV p/p, max 3V p/p
conforming to S/PDIF, AES3, IEC60958 or EIAJ CP1201 |
|
More
info on module 01: HD/SD >> |
|
Inputs with
SD-SDI/CST Module |
|
Input: |
BNC
Connector. Input impedance 75 ohms. Max d.c. +/- 10V |
|
SMPTE 259M serial digital at 800mV
p/p |
|
Auto equalized up to 350 meters of cable
at 270mb/s |
|
PAL or NTSC composite video 0.5 to
2.0V p/p |
|
SDI
Output |
BNC connector. Output impedance 75 ohms.
Equalized version of the serial digital
input. |
|
Ext-ref / AES input |
BNC
connector. Input
impedance 75 ohms. Max
d.c. +/- 3V |
|
Video 0.5 to 2.0V p/p.
|
|
Digital Audio min 150mV
p/p, max 3V p/p conforming to S/PDIF, AES3, IEC60958 or
EIAJ CP1201 |
|
Additional Notes |
More
info on module 02: SD/CST >> |
|
General Info |
|
Waveform Monitors |
Response Flat is +/- 0.5% 50Hz to 30MHz |
|
Low Pass is -3db @ 1.5MHz, -60db @
6.75MHz |
|
Line select is any line from the frame |
|
Parade is 3H display of input or filter
parade |
|
Timebase H, 2H and Hmag (x5). V, 2V and
Vmag |
|
Vector Monitors |
Video Traditional component or composite
display |
|
Component accuracy 0.2%. Bandwidth 3.375MHz |
|
Composite accuracy 1%. Bandwidth 1.3MHz |
|
Audio Monitors |
Audio Stereo phase display of left or
right audio pair |
|
Phase accuracy 2 degrees |
|
Accuracy Better than 0.1db over full
scale range |
|
Characteristics BBC, EBU, Nordic and VU |
|
Audio Monitoring Output |
3.5, stereo jack |
|
Output |
Output to DVI or XVGA monitor, (1024 x
768 @ 60Hz digital or analogue monitor, via a DVI-I
socket. ) |
|
Audio output jack, USB’s and RJ45 |
|
Environment |
Indoor use, 5 to 45˚C |
|
Ambient to 2,000m |
|
Max humidity 80% to 31 deg.C decreasing
to 50% at 40˚C |
|
Overvoltage category 2 |
|
Pollution degree 1 |
|
Power |
10 to 14V d.c. to 4 pin XLR. Pin 1 =
ground, pin 4 = +12V @ 0.5A max |
|
Can also be powered by the optional
internal battery pack. |
|
Dimensions |
19.29" x 9.84" x 1.77" Inches
490mm x 250mm x 45mm. |
|
Weight |
Approx. 13.2lb (3Kg) |
|
|
|
|
Ordering Information |
| Model |
Description |
Buy Online |
Price |
| DS9000A |
Hamlet DS9000A Auto Sensing Multi-Standard Waveform, Vector and Audio unit (base Unit) |
 |
$5,189.00 |
| DS9000AOPT1 |
Hamlet DS9000A+OPT1 Auto sensing HD & SD-SDI multi standard waveform, vector and audio unit (inc base unit) |
|
$6,251.00 |
| DS9000AOPT2 |
Hamlet DS9000A+OPT2 Auto sensing SD-SDI& CST multi standard waveform, vector and audio unit (inc base unit) |
|
$6,039.00 |
| DS9000AOPT3 |
Hamlet DS9000A+OPT3 Auto sensing TSG/HD/SD multi standard waveform, vector and audio unit (inc base unit) |
|
$7,220.00 |
| DS9000ASET1 |
Hamlet DS9000A SET (1&2) HD/SD Auto sensing HD & SD-SDI multi standard waveform, vector and audio unit (inc base unit) |
|
$7,101.00 |
| DS9000ASET13 |
Hamlet DS9000A SET(1&3) Auto sensing HD/HD/TSG multi standard waveform, vector and audio unit (inc base unit) |
|
$8,283.00 |
| DS9000ASET2 |
Hamlet DS9000A SET (2&3) Auto sensing SD-SDI/CMPST multi standard waveform, vector and audio unit (inc base unit) |
|
$8,070.00 |
| DS9000ASET22 |
Hamlet DS9000A SET(2&2) Auto sensing SD/SD multi standard waveform, vector and audio unit (inc base unit) |
|
$6,390.00 |
| Optional Accessories |
| Model |
Description |
Buy Online |
Price |
| OPTION1CARD |
Hamlet OPTION 1 CARD Auto sensing HD & SD-SDI multi standard waveform, vector and audio (module only) |
|
$1,063.00 |
| OPTION2CARD |
Hamlet OPTION 2 CARD Auto sensing SD-SDI, Composite, AES, EXT Ref(module only) |
|
$850.00 |
| OPTION3CARD |
Hamlet OPTION 3 CARD Auto sensing HD/SD-SDI, AES, EXT REF & Internal TSG (module only) |
|
$2,032.00 |
|
)
