| |
HZ551 Electrical Field Probe |
Frequency Range: |
< 1MHz to approx. 3GHz |
| Directional Sensitivity: |
Omnidirectional Sensitive to Electrical
Fields |
| Output Impedance: |
50Ω (ohms); SMA-Connector |
| Power Supply: |
6VDC/80mA (directly from Spectrum Analyzer) |
HZ552 Magnetic Field Probe |
Frequency Range: |
< 30MHz to approx. 3GHz |
| Directional Sensitivity: |
Similar to frame antenna Sensitive to
changing Magnetic Fields |
| Output Impedance: |
50Ω (ohms); SMA-Connector |
| Power Supply: |
6VDC/80mA (directly from Spectrum Analyzer) |
HZ554 Magnetic Field Probe
(small sensor) |
Frequency Range: |
< 50MHz to approx. 3GHz |
| Directional Sensitivity: |
Sensitive to
changing Magnetic Fields
High Spatial Resolution due to very small sensor area |
Max. Voltage of an non-insulated Conductor: |
30V |
| Output Impedance: |
50Ω (ohms); SMA-Connector |
| Power Supply: |
6VDC/50mA |
HZ555 Low Impedance Probe |
Frequency Range: |
250 kHz to approx. 3GHz |
| Input Capacity: |
< 0.2pF II approx. 250kΩ |
| Attenuation: |
10:1 |
| Max. input Voltage: |
5Vpp (without significant distortion) |
Max. Voltage of an uninsulated Conductor: |
30V |
| Output Impedance: |
50Ω (ohms); SMA-Connector |
| Power Supply: |
6VDC/80mA (directly from Spectrum Analyzer) |
HZ556 Radiation Probe |
Frequency Range: |
250 kHz to approx. 3GHz |
| Directional Sensitivity: |
Like Frame antenna
Radiation of changing magnetic fields |
| Max. Input Power: |
< 0.5 W (short term) |
| Output Impedance: |
50Ω (ohms); SMA-Connector |
| Power Supply: |
Not required (Passive Probe) |