Specifications
(All data valid at 23 °C after 30 minute warm-up) |
| Vertical System Specifications |
| Channels |
Analog |
2 |
| Digital |
2 + (additionally with Option HO2010)
4 Logic Channels |
| Operating Modes |
Analog |
CH 1 or CH 2 separate, DUAL (CH 1 and
CH 2 alternate or chopped), Addition |
| Digital |
Analog Signal Channels: CH 1 or CH 2
separate, DUAL (CH 1 and CH 2) or Addition
Logic Signal
Channels (LCH 0 - 3) switchable |
| XYZ-mode |
CH 1 |
| Invert |
CH 1, CH 2 |
|
Bandwidth (-3 dB) |
2 x 0 - 200 MHz |
| Rise time |
<1.75 ns |
| Bandwidth Limiter
(switchable) |
approx. 20 MHz (1 mV/div - 5 V/div.) |
| Inputs CH 1, 2 |
Impedance |
1 MΩ II 13 pF |
| Coupling |
DC, AC, 50 Ω, GND (ground) |
| Offset control |
1 mV, 2 mV: ±0.2V
5 - 50 mV: ±1V
100 mV - 5V: ±20V |
| Max. Input Voltage |
250 V (DC + peak AC), 50 Ω <5 Vrms |
| Y Delay Line (analog) |
70 ns |
| Measuring Circuits |
Measuring Category I |
Analog mode only:
Auxiliary input |
Function
(selectable) |
Ext. Trigger, Z (unblank in analog
mode) |
Coupling
(Ext. Trig./Z) |
all /AC, DC |
| Max. input voltage |
100 V (DC + peak AC) |
| Digital mode only |
Logic Channels |
Logic Channels in combination with Option HO2010 |
| Quantity |
4 (LCH 0 - 3) |
| Select. switching thresholds |
TTL, CMOS, ECL (common for all) |
| User definable thresholds |
2 |
| Within the range: -2 - +8 V (common for all) |
| Horizontal Deflection |
| Analog Time Base |
Operating modes |
A, ALT (alternating A/B), B |
| Time base A |
20 ns/div. - 0.5 s/div. (1–2–5 sequence) |
| Time base B |
20 ns/div - 20 ms/div. (1–2–5 sequence) |
| Accuracy A and B: ±3% |
| X Magnification x10 |
to 2 ns/div |
| Accuracy: ±5% |
| Variable time base A/B |
cont. 1:2.5 |
| Hold Off time |
var. 1:10 (LED-Indication) |
| Analog XY Mode |
Bandwidth X-Amplifier |
0…3 MHz (-3 dB) |
| xY phase shift |
<3° <220 kHz |
| Digital Time Base |
Time base range
(1–2–5 sequence) |
Refresh Mode: 2 ns/div. - 50 s/div. |
| with Peak Detect: 500 ns/div. - 50 s/div. (min. Pulse Width 10 ns) |
| Roll Mode: 50 ms/div.…50 s/div. |
| Accuracy time base |
Time coefficient: 50 ppm |
| Display: ±1% |
| Memory Zoom |
max. 100,000:1 |
| Digital XY Mode |
Bandwidth X-Amplifier: 0 - 200 MHz (-3 dB) |
| XY phase shift: <3° <200 MHz |
| FFT Mode |
| Display X |
Frequency Range |
| Display Y |
True rms value of spectrum |
| Scaling: Linear or logarithmic |
| Level display: dBV, V |
| Window |
Square, Hanning, Hamming, Blackman |
|
Control |
Center frequency,
Span |
| Marker |
Frequency, Amplitude |
| Zoom (frequency axis): |
up to x20 |
)
PDF Help