Graphtec GL100-WL-4TSR

Wireless Data Logger Thermistor Set, GS-4TSR Input Terminal

GL100WL4TSR
GL100-WL-4TSR

Graphtec GL100-WL-4TSR

Wireless Data Logger Thermistor Set, GS-4TSR Input Terminal

GL100WL4TSR
GL100-WL-4TSR

The Graphtec GL100-WL-4TSR Wireless Data Logger Thermistor Set with GS-4TSR Thermistor Input Terminal (with Wireless LAN) includes an input terminal for temperature resistance. The GS-103AT-4P or GS-103JT-4P Thermistor Sensor can be used with this input terminal.

  • Number of Channels: 4
  • Temperature Range: -40º to 120ºC
  • Logic (Signal Pattern): 0 to 24V (common ground)
  • Pulse/Count: 200 counts/sampling interval, accumulating up to 65535 counts
  • This set comes with the GL100-WL Data Logger with Wireless LAN and the GS-4TSR Acceleration/Temperature Sensor
  • Able to interface with Android or iOS smart device
  • Real-time data capturing
  • Display the captured data value to the LCD in real-time and save the monitoring values
  • Supports a variety of measurements by exchanging the input module
  • PC and smart mobile device software available
  • Industry-specific software: agriculture, logistics, power
  • Built-in memory: 4.9 MB
  • microSD memory card port

The Graphtec GL100-WL-4TSR is a set that comes with the GL100-WL compact Data Logger with wireless LAN as well as the GS-4TSR 4-Channel Input Thermistor Adapter. Its body allows users to switch sensors and terminals for measuring various signals. The main body dimension is a slight 2.6 in. wide x 3.93 in. tall x 1.06 in. thick (66 mm x 100 mm x 27 mm). Powered by two AA batteries (not included) or USB bus power (included MicroB-A USB cable). With an on-board memory of 4.9 MB and external memory via Micro SD card slot, the GL100 body also includes one USB port (Micro B connection). The display of the GL100WL4TSR is a backlit monochrome with 128×64 dot resolution displaying measured values and settings. Recorded data is not displayed on the main unit; Captured data can only be displayed on PC using included application software. WLAN Real-time monitoring through smartphone devices (iOS 9 or later, Android OS 4.3 or later) plus automatic alarm emails—with ability to configure remotely.

More Information
Country of OriginJapan
BrandGraphtec
ConditionNEW
Vendor AliasGL100-WL-4TSR
  • 1 - User manual
  • 1 - USB cable
  • 1 - GS-4TSR Input Thermistor Adapter
  • 1 - Connection cable