Graphtec GL100-N-CO2-DPA-LXUV

Data Logger with CO2 Sensor, Light/UV Sensor, and Adapter

GL100NCO2DPALXUV
GL100-N-CO2-DPA-LXUV

Graphtec GL100-N-CO2-DPA-LXUV

Data Logger with CO2 Sensor, Light/UV Sensor, and Adapter

GL100NCO2DPALXUV
GL100-N-CO2-DPA-LXUV

The Graphtec GL100-N-CO2-DPA-LXUV Compact Data Logger with GS-CO2 Carbon Dioxide Sensor/GS-LXUV Illuminance/UV Sensor/GS-DPA-AC AC Current Sensor Adapter (without Wireless LAN) can be used to measure current power, electric energy, carbon dioxide concentration levels, illuminance, and UV intensity.

  • CO2 Range: 0 to 9999 ppm
  • Illuminance Range: 0 to 200 klx
  • UV Intensity Range: 0 to 30 mW/cm^2
  • Power Range: 50/100/200A RMS (varies by sensor)
  • This set comes with the GL100-N Data Logger, the GS-CO2 Carbon Dioxide Sensor, GS-DAP-AC AC Current Sensor Adapter, and the GL-LXUV Illuminance and UV Sensor
  • CO2 density sensor with a measuring range of 0-9,999ppm concentration.
  • GS-LXUV light sensor with Luminance, UV ray strength, Accumulated Luminance(1), Accumulated UV ray strength(1)
  • GS-DAP-AC can connect up to 2 of the GS-TH, GS-CO2, or GS-LXUV
  • GS-DAP-AC Current Sensor Adapter is not able to connect two sensors of the same type.
  • Real-time data capturing
  • Display the captured data value to the LCD in real-time and save the monitoring values
  • Supports a variety of measurements by exchanging the input module
  • PC and smart mobile device software available
  • Industry-specific software: agriculture, logistics, power
  • Built-in memory: 4.9 MB
  • microSD memory card port

The Graphtec GL100-N-CO2-DPA-LXUV is a set that comes with the GL100-N compact Data Logger as well as the GS-CO2 Carbon Dioxide Sensor, GS-DAP-AC AC Current Sensor Adapter, and the GL-LXUV Illuminance and UV Sensor. Its body allows users to switch sensors and terminals for measuring various signals. The main body dimension is a slight 2.6 in. wide x 3.93 in. tall x 1.06 in. thick (66 mm x 100 mm x 27 mm).

Powered by two AA batteries (not included) or USB bus power (included MicroB-A USB cable). With an on-board memory of 4.9 MB and external memory via Micro SD card slot, the GL100 body also includes one USB port (Micro B connection).

The display of the GL100NCO2DPALXUV is a backlit monochrome with 128x64 dot resolution displaying measured values and settings. Recorded data is not displayed on the main unit; Captured data can only be displayed on PC using included application software.

The compact GS-CO2 density sensor of the GL100-N-CO2-DPA-LXUV set is designed for industries requiring climate monitoring and control solution such as greenhouse, hydroponics, agriculture and botanical areas where operators need real time environment and climate monitoring. Fine arts museums and galleries are also served for controlled environment settings where the GS-CO2 excels.

The GS-LXUV illuminance and UV sensor for the GL100-N-CO2-DPA-LXUV is for industries requiring accurate light metering with UV ray strength and accumulated luminance monitoring. This is the perfect hardware application for greenhouse, hydroponics, agriculture and botanical rooms giving maintenance techs real time environment and climate monitoring. Fine arts museums and galleries are also served for controlled environment settings.

The GS-DAP-AC is an AC current sensor adapter that can connect with up to 2 sensors simultaneously, and can be connected to the GS-TH(not included with the GL100-N-CO2-DPA-LXUV), the GS-CO2, and the GS-LVUX.

More Information
BrandGraphtec
ConditionNEW
Vendor AliasGL100-N-CO2-DPA-LXUV
  • 1 - GL100-N Standard Data Logger
  • 1 - Quick Start Guide
  • 1 - CD-Rom
  • 1 - USB Cable
  • 1 - CO2 Sensor
  • 1 - Light/UV Sensor
  • 1 - Current Sensor Adapter