Graphtec GL100-N-CO2

Compact Data Logger Carbon Dioxide Density Set, GS-CO2 Concentration Sensor

GL100NCO2
GL100-N-CO2

Graphtec GL100-N-CO2

Compact Data Logger Carbon Dioxide Density Set, GS-CO2 Concentration Sensor

GL100NCO2
GL100-N-CO2

The Graphtec GL100-N-CO2 Compact Data Logger Carbon Dioxide Density Set with GS-CO2 Carbon Dioxide Sensor (without Wireless LAN) is suited for data-logging carbon dioxide concentration levels within an enclosed space for the safety of the inhabitants.

  • Type of Measurement: Carbon Dioxide concentration
  • CO2 Range: 0 to 9999 ppm
  • Operating Temperature: 0 to 50
  • Operating Humidity: ~80% RH (non-condensed)
  • This set comes with the GL100-N Data Logger and the GS-CO2 Acceleration/Temperature Sensor
  • Real-time data capturing
  • Display the captured data value to the LCD in real-time and save the monitoring values
  • Supports a variety of measurements by exchanging the input module
  • PC and smart mobile device software available
  • Industry-specific software: agriculture, logistics, power
  • Built-in memory: 4.9 MB
  • microSD memory card port

The Graphtec GL100-N-CO2 is a set that comes with the GL100-N compact Data Logger as well as the GS-CO2 Carbon Dioxide Density sensor. Its body allows users to switch sensors and terminals for measuring various signals. The main body dimension is a slight 2.6 in. wide x 3.93 in. tall x 1.06 in. thick (66 mm x 100 mm x 27 mm). Powered by two AA batteries (not included) or USB bus power (included MicroB-A USB cable). With an on-board memory of 4.9 MB and external memory via Micro SD card slot, the GL100 body also includes one USB port (Micro B connection). The display of the GL100NCO2 is a backlit monochrome with 128×64 dot resolution displaying measured values and settings. Recorded data is not displayed on the main unit; Captured data can only be displayed on PC using included application software.

More Information
Country of OriginJapan
BrandGraphtec
ConditionNEW
Vendor AliasGL100-N-CO2
  • 1 - User manual
  • 1 - USB cable
  • 1 - GS-CO2 CO2 Density sensor
  • 1 - Connection cable