- 5.7" color LCD display
- Built-in Ethernet 100Tx and USB 2.0 interfaces
- Accepts voltages, thermocouples and humidity
- 8 channels
- Voltage input levels: 20mV to 500V F.S.
- Thermocouple input types: B, R, S, T, N, K, W, E, J
- Continuous battery charge during operation
- 256MB internal flash memory
- Includes 4 pulse logic inputs, 1 trigger input
- Includes 4 x alarm outputs
- Compact data logger footprint (232mm x 150mm x 80mm)
- Includes Windows software for setup, control, data transfer, data conversion to ASCII and Excel formats, and on-screen data review with cursors
The Graphtec GL900 8 channel Data Acquisition Data logger brings higher speed recording and high isolation to the familar small size and affordale price of the GL series. Modern conveniences such as Ethernet and USB 2.0 interfaces are included so the user can easily get the data out of the Graphtec GL 900 and transfer it to a computer. Data are normally captured into the Graphtec GL900’s large internal flash memory, at rates selectable from 10μ to 1 hour! The Graphtec GL-900 can record for hours, days, or even weeks.
Easy-to-use, upright, high-speed, isolated8-channel multifunction logger
An easy-to-use upright device enabling isolated 8-channel multifunction input, the Graphtec GL900 is capable of performing high-speed simultaneous measurements of voltage, temperature, and various other phenomena.
High-voltage measurement capabilities
The wide 500 V range of the Graphtec GL900 enables 100 to 240 VAC power supply voltage waveform measurements. Using logic input and a clamp meter simultaneously allows measurement of a device’s power supply voltage and current concurrently with sequential control of various points.
Free Running display for waveform-analysisfor non-recording usage
The Graphtec GL900's Free Running display lets users check input signal waveforms even before measurements begin. Waveforms are displayed on each setup screen, users can change settings while viewing the waveforms.
Can be used an X-Y recorder
The Graphtec GL900 reproduces analog X-Y recorder movements and provides the illusion of pen up/pen down movements. The Graphtec GL900 can be operated like an analog X-Y recorder and can also be used as a 4-pen X-Y recorder. The digital data format facilitates post-measurement confirmation of data values and report creation.
Easy PC measurement via USB; remote monitoring via ethernetWeb server and FTP functions
The USB and Ethernet connections enable transfer of captured data to your PC and setup and control of the Graphtec GL900 from a PC, even without the PC software provided as standard software with the Graphtec GL900.
Data can be captured to PC-friendlyUSB memory sticks
Long-term data can be captured directly to built-in 256-MB flash memory or to an external USB memory stick at sampling intervals from 1 ms to 1 min. For high-speed sampling at intervals faster than 1 ms, up to one million data points can be captured to internal RAM.
|Data Sheet:||(1.31 MB)|