- 40 GB Hard Drive
- 8 channels
- Long-Term Analog Data Recording
- Large Capacity Data Capture Capabilities
- 8.4" color LCD monitor for data display and the graphical user interface
- Plug-in 2-channel WR3 series amplifiers adapt the system to a wide variety of input types and sensors.
- Up to 1 MS/s sampling rate on all channels
- Bandwidth (frequency response): dc to 50 kHz
- 1 M Sample internal memory PER CHANNEL is standard
- Built-in 100 mm wide printer in the 4-ch model
- Interfaces: Ethernet, USB, and slot for flash memory cards
- Performance, reliability and ease of use Includes PC software for control, data transfer and conversion to popular formats
The Graphtec WR310-8 Thermal Arraycorders are economical waveform recorders available in 4, 8 and 16 channel configurations. Unlike old-fashioned paper-only recorders, the Graphtec WR-310-8 is a 21st century technology through and through.
Available are convenient 2-channel plug-in modules that adapt the Graphtec WR 310-8 to a wide variety of input types and sensors, including voltages up to 500 V, strain gages, thermocouples, frequency/RPM signals, and more. There’s also a logic input amp which offers the same number of inputs as the base machine (4, 8, or 16).
Data are shown on the Graphtec WR310-8 all the time of the 8.4" color LCD screen in a variety of formats, including scroll. oscilloscope, XY, and even FFT! Data can be printed in real time or after acquisition on the Graphtec WR/310-8, to the built-in 100 or 200 mm wide chart output.
Easy Operation – Intuitive Controls
A separate bank of chart speed setting keys enables the user to change the chart speed on the Graphtec WR310-8 at any time, and four directional cursor keys are provided for easy menu selection. The additional buttons of the Graphtec WR310-8 makes this unit even easier to use than similar products.
Data Upload to Your PC
OPS023 control/transfer/conversion software is included with the Graphtec WR310-8, so the user can convert data captured to Excel or delimited ASCII format. FlexPro can open Graphtec WR 310-8 data files natively, providing a powerhouse analytical capabilities with an Excel-like interface.
|WR-3DCB||Graphtec WR-3DCB DC Strain preamp for WR300 Series, 2-channel module||Discontinued|
|WR-3-FV||Graphtec WR-3-FV F/V preamp for WR300 Series, 2-channel module||Discontinued|
|WR3-M||Graphtec WR3-M Multi-input preamp for WR300 Series, 2-channel module||
|WR3-V||Graphtec WR3-V Voltage preamp for WR300 Series, 2-channel module||Discontinued|
|B-335||Graphtec B-335 2-pin Input cable (banana terminal) bare tips, 16-cable set||Not Available||
|B-522||Graphtec B-522 200 mm long-length Z-fold unit for the WR300/WR310 Series||Discontinued|
|B-523||Graphtec B-523 100 mm internal Z-fold unit for the WR300/WR310 Thermal Arraycorders Series||Discontinued|
|B-524||Graphtec B-524 200 mm internal Z-fold unit for the WR300/WR310 Thermal Arraycorders Series||Discontinued|
|RIC-07||Graphtec RIC-07 Logic IC cable for the RIC-08 or RIC-09||
|RIC-08||Graphtec RIC-08 Alligator clip cable||
|RIC-09||Graphtec RIC-09 IC clip cable||
|RIC-10||Graphtec RIC-10 Probe set (1 each of RIC-07, RIC-08, RIC-09)||
|PR230-R5A||Graphtec PR230-R5A Roll Paper, 100mm wide, 40 m long (for WR300-4 only), 5 pack||
|PZ230-R5A||Graphtec PZ230-R5A Z-fold paper, 100mm wide, 40 m long (for WR300-4 with B-523 option only), 5-Pack||
|PR231A-R10A||Graphtec PR231A-R10A Roll Paper, 200mm wide, 40 m long (for WR300-8/16, WR310-8,/16), 10-Pack||
|PZ233-R5A||Graphtec PZ233-R5A Z-fold paper, 200mm x 40 m (for WR300/WR310-8/16 with B-524 option), 5-Pack||
|PZ231A-R5A||Graphtec PZ231A-R5A Z-fold paper, 200mm x 100 m (WR300-8/16WR310-8/16 with B-522 option), 5-Pack||
|Data Sheet:||(2.4 MB)|