- 16 input channels
- 8.4" color LCD monitor for data display and the graphical user interface
- Plug-in 2-channel WR3 series amplifiers adapt the system to a wide variety of input types and sensors.
- Up to 1 MS/s sampling rate on all channels
- Bandwidth (frequency response): dc to 50 kHz
- 1 M Sample internal memory PER CHANNEL is standard
- Built-in 200mm (8") wide thermal array printer
- Interfaces: Ethernet, USB, and slot for flash memory cards
- Performance, reliability and ease of use Includes PC software for control, data transfer and conversion to popular formats
The Graphtec WR300-16 Thermal Arraycorders are economical waveform recorders available in 16 channel configurations. Unlike old-fashioned paper-only recorders, the Graphtec WR300-16 is a 21st century technology through and through.
Available are convenient 2-channel plug-in modules that adapt the Graphtec WR300-16 to a wide variety of input types and sensors, including voltages up to 500 V, strain gages, thermocouples, frequency/RPM signals, and more. There’s also a logic input amp which offers the same number of inputs as the base machine.
Data are shown on the Graphtec WR/30016 all the time of the 8.4" color LCD screen in a variety of formats, including scroll. oscilloscope, XY, and even FFT! Data can be printed in real time or after acquisition on the Graphtec WR300-16, to the built-in 100 or 200 mm wide chart output.
Easy Operation – Intuitive Controls
A separate bank of chart speed setting keys enables the user to change the chart speed on the Graphtec WR3016 at any time, and four directional cursor keys are provided for easy menu selection. The additional buttons of t0-he Graphtec WR300-16 makes this unit even easier to use than similar products.
Data Upload to Your PC
OPS023 control/transfer/conversion software is included with the Graphtec WR-300-16, so the user can convert data captured to Excel or delimited ASCII format. FlexPro can open Graphtec WR30016 data files natively, providing a powerhouse analytical capabilities with an Excel-like interface.
|WR-3DCB||Graphtec WR-3DCB DC Strain preamp for WR300 Series, 2-channel module||Not Available||
|WR-3-FV||Graphtec WR-3-FV F/V preamp for WR300 Series, 2-channel module||Not Available||
|WR3-M||Graphtec WR3-M Multi-input preamp for WR300 Series, 2-channel module||
|WR3-V||Graphtec WR3-V Voltage preamp for WR300 Series, 2-channel module||Not Available||
|B-335||Graphtec B-335 2-pin Input cable (banana terminal) bare tips, 16-cable set||Not Available||
|B-522||Graphtec B-522 200 mm long-length Z-fold unit for the WR300/WR310 Series||Discontinued|
|B-523||Graphtec B-523 100 mm internal Z-fold unit for the WR300/WR310 Thermal Arraycorders Series||Discontinued|
|B-524||Graphtec B-524 200 mm internal Z-fold unit for the WR300/WR310 Thermal Arraycorders Series||Discontinued|
|RIC-07||Graphtec RIC-07 Logic IC cable for the RIC-08 or RIC-09||
|RIC-08||Graphtec RIC-08 Alligator clip cable||
|RIC-09||Graphtec RIC-09 IC clip cable||
|RIC-10||Graphtec RIC-10 Probe set (1 each of RIC-07, RIC-08, RIC-09)||
|PR230-R5A||Graphtec PR230-R5A Roll Paper, 100mm wide, 40 m long (for WR300-4 only), 5 pack||
|PZ230-R5A||Graphtec PZ230-R5A Z-fold paper, 100mm wide, 40 m long (for WR300-4 with B-523 option only), 5-Pack||
|PR231A-R10A||Graphtec PR231A-R10A Roll Paper, 200mm wide, 40 m long (for WR300-8/16, WR310-8,/16), 10-Pack||
|PZ233-R5A||Graphtec PZ233-R5A Z-fold paper, 200mm x 40 m (for WR300/WR310-8/16 with B-524 option), 5-Pack||
|PZ231A-R5A||Graphtec PZ231A-R5A Z-fold paper, 200mm x 100 m (WR300-8/16WR310-8/16 with B-522 option), 5-Pack||
|Data Sheet:||(2.4 MB)|