| Specifications |
| Function |
Description |
| Power |
Type |
3-wire AC line input (117V, 60 Hz typical) with
power-on indicator. Both Models are available in 220-240VAC@50Hz |
| Fixed DC output |
+5V@1.0A, ripple <5mV |
| Variable DC output |
+1.3 V to +15V@0.5A, ripple <5mV |
| -1.3V to -15V @ 0.5A, ripple <5mV |
| Function Generator |
Frequency Range |
0.1 Hz to 100 kHz in six ranges. |
| Output voltage |
0 to ±10V (20Vp-p). |
| Output Impedance |
600 ohms (except TTL). |
| Output current |
10mA maximum, short circuit protected |
| Output waveforms |
sine, square, triangle, TTL |
| Sine wave |
distortion <3% (10Hz to 100kHz) |
| TTL pulse |
rise and fall time <25 nS. drive to 10 TTL loads |
| Square wave |
rise and fall time <1.5µS |
| Logic Indicator |
8 LED's, active high, 1.4 volt (nominal) threshold,
inputs protected to ±20 volts |
| Debounced Push-Button (pulsers) |
Two pushbutton-operated, open-collector output
pulsers, each with one normally-open, one normally closed output. Each
output can sink up to 250 mA. |
| Potentiometers |
One 1 K ohm, one 10 K ohm, all leads available and
uncommitted |
| BNCs Connectors |
Two BNC connectors, pin available and uncommitted,
shell connected to ground |
| Switches |
Two SPDT slide switches, all leads available and
uncommitted. 8-pole DIP switch: one side of all eight switches connected
and switchable to +5V or ground, other side of all eight switches
separate, available, and uncommitted. |
| Speaker |
0.25W, 8 ohms |
| Breadboarding Area |
Three UBS-100 sockets with 840 tie-points each for a
total of 2520 uncommitted tie-points. Two QT-59B Bus strips internally
connected to power and ground. Fifty tie-points each for +5V, +V,=15 V
and ground |
Physical
Dimensions |
Size |
6.5" H x 16" W x 11.5" D |
| Weight |
7 lbs |
)
