Fluke Networks CIQ-GSV2 CableIQ Network Cable Tester Service Kit with Tone Generator. Fluke Networks CableIQ Qualification Service Kit provides network service technicians with the capabilities to qualify cabling performance and confirm network connectivity, and includes tools for expediting problem resolution, performing high-quality moves, changes, additions, and upgrades. CableIQ qualification tester qualifies cabling bandwidth, including voice, 10/100/1000 Ethernet, VoIP, and CATV, and locates performance faults. It identifies wiremap faults, bridge taps, and port characteristics; detects and displays the strength of RF coaxial television signals; and automatically reports whether the cable is connected to a device. A wiremap function supports up to seven unique ID numbers and can be performed to verify that cables are installed correctly. The MultiMap function tests multiple segments through bridge taps to detect faults on individual conductors. The tester detects and locates crosstalk and impedance faults. The continuity toner tests security switches at door and windows and the speaker test verifies speaker connections. The tester blinks the port light on a hub or switch to verify connectivity and cable routing. The built-in toner function works with standard analog probes to locate and isolate cables behind walls, at patch panels, or in bundles. The IntelliTone function works with optional Fluke Networks IntelliTone 100 and IntelliTone 200 probes. The meter stores up to 250 sets of test results. Results can be downloaded to a computer for long-term records retention, or imported to the CableIQ Reporter software for analysis and generation of certification reports to provide evidence that the installation has been completed according to standards and best practices (software and USB cable included). Copper and fiber testers are used by network technicians to troubleshoot, maintain, and optimize performance of copper and fiber optic cabling, hardware connections, and network settings in enterprise networks.