|HOME > FLUKENETWORKS > NETWORK-TESTERS > ONETOUCH-AT-NETWORK-ASSISTANT-1T1500|
Fluke Networks 1T-1500
Fluke Networks 1T-1500 Shown
|Combined copper and fiber troubleshooting
The Fluke Networks 1T-1500 OneTouch AT Network Assistant incorporates two 10/100/1000 Mbps RJ-45 Ethernet test ports and two 100/1000 Mbps SFP fiber optic transceiver ports. Test wired Ethernet and easily compare performance with side-by-side test results.
Standardized network troubleshooting and performance validation
Use the intuitive touch interface and the Setup Wizard to create test profiles, where a profile is a set of tests, tailored to specific networks, services, and applications. Build profiles to accommodate different types of users, devices, locations or technologies. Profiles can be very simple with just a few tests or advanced with dozens of tests. Once created, profiles can be saved for quick and easy reuse. Create a library of standardized profiles to elevate the troubleshooting know-how of the entire network support staff. Share profiles with other OneTouch AT users. Use the profiles to establish best practices for consistent, faster, more productive troubleshooting and network acceptance testing.
Automated testing and pass/fail analysis
Test everything defined in a profile automatically with the one button AutoTest. The AutoTest progresses from the physical layer of the network through the wired and wireless infrastructure, to network services and user-defined applications. Clear pass/fail and warning indicators highlight potential problems. A top-level pass/fail indicator provides the overall AutoTest status at a glance.
A client view of performance
Most network trouble tickets start where a client device is connected to the network - where the device could be a PC, tablet, smart phone, IP phone, printer, POS terminal, industrial equipment controller, a medical imager etc. Troubleshoot common issues - or prove that the network is not the cause - by emulating the client device and measuring network performance.
Comprehensive testing from the patch cable to the cloud
The cause of a network problem can be elusive. Identify the root cause of a problem by measuring and analyzing the performance of the critical network elements: the network cabling, the delivery of Power over Ethernet (PoE), the connection to the nearest switch, the connection to the nearest access point, and the performance of key network services and server-based applications.
The Trending feature automatically and repeatedly uploads AutoTest results to the cloud for additional analysis. Control the number of AutoTest results uploaded by setting the trending duration and interval. Trending runs automatically once launched, untethering the user from the tester. The user does not need to be present to gather test results; simply launch Trending and leave. Trend results for up to 1 week, or until manually stopped. Long duration testing is invaluable when trying to troubleshoot sporadic, intermittent problems that frequently occur when network support staff is away.
Open a OneTouch AT Cloud Service account to view and analyze AutoTest results uploaded via the Trending feature. Correlate network events by viewing multiple test results simultaneously in side-by-side charts. All the test results uploaded during a single Trending session are available for analysis. The number of tests is defined by the complexity of the AutoTest profile and the number of results is defined by the Trending duration and interval. Select one or more of the tests within the trending session to analyze the results. The Cloud Service plots sequential results on a single color-coded chart to simplify analysis over time. Charting makes it easy to see performance irregularities. Zoom permits an even more detailed analysis of the sub-processes that comprise each individual test. Access the Cloud Service over the web at anytime from anywhere using a web-connected smart device with a web browser. View and analyze results when and where it is convenient using a PC or smart device. Basic Cloud Service is free and includes long-term storage of a single trending session. Gold Cloud Service offers long-term storage of multiple trending sessions and is included with Gold Support.
Remote control and file access
Use the built-in RJ-45 management port to remotely control the OneTouch AT and access saved files. Any action that can be performed directly on the OneTouch AT using the touch screen can be performed remotely using a PC, laptop, tablet or smart phone. Manage the OneTouch AT remotely when and where convenient using a device at hand. Minimize the time, expense and inconvenience of traveling to the client location where the problem was reported. Webcam support enables live, remote viewing of the physical environment near the tester. Remotely control the OneTouch AT and access saved files from the Cloud Service. Increase productivity by remotely managing the tester and viewing trended AutoTest results all from a single location. Remote management via the Cloud Service also allows traversal of NAT devices, which is very advantageous when troubleshooting from outside the office.
Problem avoidance and performance optimization
Cloud trending and analytics let you use the OneTouch AT for proactive problem avoidance and performance optimization. Set a long trending duration – up to one week - and use Cloud Service analytics to identify potential vulnerabilities and performance bottlenecks. In this use model the OneTouch AT tester serves as a 24/7 portable network probe and the Cloud Service as the analytics engine. Identify and correct potential network, service or application vulnerabilities before they become problems that adversely impact users. Identify performance bottlenecks and appropriately reconfigure the network to optimize end user response time. The OneTouch AT excels at both “firefighting” - reactive troubleshooting of persistent and intermittent problems – and daily network management - proactively avoiding problems and optimizing performance.
Copper and fiber optic cable testing
Troubleshoot cable performance quickly by measuring twisted pair cable wiremap and length. Use cable identifiers and IntelliTone™ toning to locate and identify cables. Measure the optical power received through fiber optic links. Verify the cleanliness of fiber optic connections by viewing connector end faces with the optional FiberInspector™ USB video probe.
Verify the successful delivery of PoE with the TruePower load test. Emulate an 802.3at (PoE+) class 1-4 powered device and measure power up to 25.5 watts. See the requested and received PoE class, the pairs used, the PSE type, measured PoE voltage unloaded and under load, and PoE power under load.
Wired client connectivity testing
Understand how a client device connects to the wired infrastructure by testing link negotiation, identifying the nearest switch, and monitoring key switch port statistics.
Network services testing
Test DHCP server responsiveness. Identify the wired DHCP servers and view the offer and acceptance timing and the lease information. Test DNS server responsiveness. Identify the wired DNS servers and view the DNS lookup time.
Network application testing
Determine if a server-based application is the root cause of a reported problem by measuring availability and response metrics. Add to the AutoTest profile the performance test appropriate for the application: ping (ICMP), connect (TCP), web (HTTP), file (FTP), multicast (IGMP), video (RTSP) or email (SMTP). Each test is graphically represented on the OneTouch AT home page as an icon. After running the AutoTest, touch a test icon on the home page to get a detailed breakdown of application performance including DNS lookup time, server response time and data rate. The test results are presented side-by-side for easy wired/IPv4/IPv6 performance comparisons. A few examples: ping your WLAN controller, connect to port 2000 on your VoIP call manager, download a page of an application with a web interface, upload or download a file from a server, subscribe to a multicast group, access video content from an on-demand streaming video server or email a text message to your mobile phone.
Local, intranet and internet performance
Understand the performance of network services and server-based applications wherever they are hosted: locally in the datacenter, on a corporate intranet server or on a server reached via the public internet. Create location centric AutoTest profiles by grouping together co-located services and applications. Measure service levels to the different groups to quickly spot problems.
End-to-end path performance measurement
Ensure that newly installed or upgraded wired networks meet SLA objectives and are ready for new high-bandwidth applications by measuring end-to-end path performance. Measure throughput, frame loss, latency and jitter between a local OneTouch AT and a remote OneTouch AT peer or a remote LinkRunner reflector. A remote peer provides upstream and downstream results while a remote reflector yields round trip results. Measure performance at rates up to 1Gbps on copper and fiber networks.
Capture wired, VoIP and AutoTest traffic when a packet-level view is required to solve a complex network or application issue. Filter the traffic to capture what is most important. Export the capture file to a PC for decoding and analysis using protocol analysis software. Capture wired traffic on a single port, on two ports aggregated, or inline between a client device and the network. Inline capture avoids the complexity, time and cost associated with standalone taps or configuring switch mirror ports.
Collaborate with peers, consultants, integrators and vendors more effectively by sharing packet captures, screen shots and AutoTest reports. Remotely control and view the user interface and remotely access files using a PC, tablet or smart phone. Attach a web cam to the OneTouch AT to share a view of the test environment.
Troubleshoot IPv6 networks
Easily compare and contrast IPv4 and IPv6 wired and wireless network performance by viewing test results side-by-side
Save test results
Save the test results in a PDF report to share with colleagues or outside parties. A report serves as trouble ticket documentation, as a record of historical performance for benchmarking or as a certification report after new infrastructure deployment and turn up. Define which test results to include in the report: settings, AutoTest, wired analysis, or VoIP.
Simplify AutoTest profile creation while learning about the tester’s capabilities by running the Setup Wizard. The wizard simplifies profile creation with step-by-step guided instructions, yes/no prompts, on-screen help and graphical progress indicators. Experienced users can bypass the wizard if desired.
Purpose-built for field testing
The OneTouch AT is engineered specifically for network support professionals on the go. Useful test and management tools include a web browser, Telnet/SSH client, cable toner, webcam support and optional fiber optic connector inspection camera. The durable platform provides years of reliable operation in tough environments
Versiv test platform
Expand testing capabilities by adding new modules to the Versiv platform as testing needs evolve. Available modules include DSX-5000 CableAnalyzer, CertiFiber Pro OLTS and OptiFiber Pro OTDR.
Protect your investment with Gold Support. Gold Support benefits include Gold Cloud Service, software upgrades and MIB updates, unlimited priority repair service with loaner units, annual factory performance verification, free accessory replacement and 24x7 technical support with priority members-only access numbers.
|1T-1500||Fluke Networks 1T-1500 OneTouch AT Copper and Fiber Ethernet Network Speed Tester||Discontinued
|1T-1500/GLD||Fluke Networks 1T-1500/GLD OneTouch AT Copper and Fiber Ethernet Network Speed Tester Gold Support||Discontinued
||Fluke Networks 1T-WLAN-OPT Onetouch At Wlan Option||$3,670.00|
|1T-CAP-ADV-OPT||Fluke Networks 1T-CAP-ADV-OPT Onetouch AT Capture and ADV Tests Option||$2,495.00|
|1T-WLAN-CAPADV-OPT||Fluke Networks 1T-WLAN-CAPADV-OPT Onetouch AT WLAN, Capture and ADV Tests Option||$6,032.00|
||Fluke Networks SFP-1000SX, SX GIG Fiber DDM SFP Transceiver||$214.00|
||Fluke Networks SFP-1000LX, LX GIG Fiber DDM SFP Transceiver||$436.00|
||Fluke Networks SFP-1000ZX ZX Gig Fiber SFP transceiver (1550 nm, Singlemode)||$2,491.00|
||Fluke Networks SFP-100FX, 100BASE-FX Fiber DDM SFP Transceiver||$423.00|
||Fluke Networks MT-8200-63A Intellitone 200 Toner Probe||Sale $149.15
||Fluke Networks 1T-ANT Onetouch At External Directional Antenna||$261.00|
||Fluke Networks WIREVIEW1 WireView WireMapper #1 for NTS2, ES, ES2 and OPV INA||$69.00|
||Fluke Networks WIREVIEW 2-6, Wireview Cable ID Set 2 Thru 6||$330.00|
|VERSIV-M 120||Fluke Networks VERSIV-M 120 VERSIV Main Replacement||Sale $2,179.36
||Fluke Networks VERSIV-BATTERY VERSIV Replacement Battery||Sale $363.23
|VERSIV-ACUN||Fluke Networks VERSIV-ACUN VERSIV Charger||Discontinued
|VERSIV-STRP||Fluke Networks VERSIV-STRP Strap Kit||Sale $56.60