| Fluke Networks FIBR-1-SHOT Specification |
Operating temperature
(with the battery) |
0ºC to 50ºC |
| Non-operating temperature |
-20ºC to 60ºC |
| Operating relative humidity (without condensation) |
95% (10ºC to 35ºC)
75% (35ºC to 40ºC)
uncontrolled <10ºC |
| Vibration |
Random, 5 Hz to 500 Hz,
MIL-PRF-28800F CLASS 2 |
| Shock |
1 meter drop test |
UPC or APC,
open Break Reflective incident
Poor bulkhead connection |
BREAK OR END OF FIBER
BREAK OR END OF FIBER
0 ft/m (Will not measure a splice loss, connector loss, bend loss, or fiber attenuation.) |
| LCD type |
Backlit black and white (segments) |
| Index of refraction range |
1.45 to 1.5 (factory default is 1.468) |
| Auto turn off |
Automatically turns off after 5 minutes if no keys are pressed. |
| Factory calibration interval |
None |
| Output wavelengths |
1310 nm ± 25 nm |
| Emitter type |
Fabry-Perot laser diode connected to 9/125 μm fiber |
| Laser classification |
Class 1 CDRH Complies to EN 60825-2 |
| Pulse widths |
20 ns to 500 ns |
| Power into fiber under test |
>10 mW-pk |
| Dynamic range |
>11 dB |
| Safety |
CSA C22.2 No. 61010.1:04,
EN 61010-1 2nd Edition 2001,
EN60825-1, 2:2006 |
| Altitude |
3000 m |
| EMC |
EN 61326-1: 2004 |
| Sampling spacing |
12.5 cm to 1 m
(1.25 ns to 10 ns) |
| Instrument reporting information |
Distance to the first reflective incident and/or end of fiber2 |
| Maximum distance |
6000 meters or 9999 feet |
| Distance accuracy (0 m to 3000 m or 0 ft to 9999 ft) |
± 1 m for reflective incidents,
± 0.1% of length6
± 3 m for non-reflective
incidents, ± 0.1% of length7 |
| Testing speed |
< 6 seconds typical 8 |
| Connector |
Removable/cleanable SC adapter, UPC polish |
| Fiber types tested |
9/125 μm single mode |
| Reflectance threshold |
-40 dB typical |
| APC open detection |
-65 dB reflectance typical and backscatter >3 dB above the noise floor |
| Detector type |
InGaAs PIN photodiode used in incident detection |
| Safety |
CSA C22.2 No. 61010.1.04,
EN 61010-1:2001 {2nd Edition},
EN60825-1:2007 Class 1 Laser |
| EMC |
EN 61326-1, EN61000-4-2, 3 80 MHz to 2.7 GHz @ 3V/m.
Telephony Requirements:
Class B Emissions |
| Photodiode |
40 μm – 80 μm, PIN InGaAs |
)
PDF Help