<< Fluke Networks Catalog
<< Fluke Networks Fiber Certification and Testing |
Fluke Networks DTX-CLT
CertiFiber Optical Loss Test Set |
 
Fluke Networks DTX-CLT
Shown
|
|
|
- Provides a complete Tier 1 fiber certification (loss,
length, and polarity) solution on both multimode and singlemode
- 12-second Autotest – loss measurement of two fibers at two
wavelengths, optical link budget calculation, and a PASS/FAIL
analysis… in 12 seconds!
- Optimized for applications ranging up to 10-Gig
- Interchangeable multimode and singlemode modules (which are
also compatible with the popular DTX™ CableAnalyzer)
- Accurate fiber length measurement – eliminate haphazard
guessing
- Continuity and polarity verification
- Easy-to-use and widely-recognized DTX-based interface
- On-board VFL to locate fibers and breaks- Speedy testing
with FINDFIBER, MONITOR, and TALK
- Supports various small form factor (SFF) fiber connectors
- Fast and professional test result documentation via the
widely-used LinkWare reporting software
|
| |
Fluke Networks' DTX-CLT CertiFiber is an optical
loss test set (OLTS) that provides a complete Tier 1 fiber certification
(loss, length, and polarity) solution on both multimode and singlemode
fiber. As an attractively priced standalone fiber certification tool, it
is expected to be popular with cabling contractors and installers,
especially Fluke Networks DTX CableAnalyzer owners desiring to "free up"
their DTXs for copper certification.
Using the same platform and interface as the renowned Fluke Networks
DTX CableAnalyzer, the Fluke Networks DTXCLT CertiFiber Optical Loss
Test Set certifies fiber according to industry standards by quickly
providing four measurements on two fibers and returning a PASS/FAIL result – without having to take
the time to swap the main and remote units as you would have to with
traditional test sets. Such speed and efficiency in testing can easily
save you more than 100 hours per year! Also, unlike most competing OLTS,
the Fluke-Networks DTX CLT CertiFiber actually measures fiber length for
you, ensuring that you do not have to rely on often undependable sheath
labeling or pacing methods.
Occasional failures are a reality in testing. The Fluke Networks DTXCLT
CertiFiber’s on-board VFL helps you to quickly troubleshoot basic causes
of failures such as breaks and macro bends. The bright laser VFL can easily
highlight near-end fiber faults in addition to verifying polarity and continuity.
Test reports are often required as proof of quality. Use LinkWare to upload
and manage test results from Fluke Networks’ family of industry-leading
copper and fiber cabling testers including the DTX™ CableAnalyzer,
OptiFiber OTDR, and SimpliFiber Pro Optical Power Meter and Fiber Test
Kits. |
| |
| Specifications |
| Optical Specifications (23°C) |
Input (Meter)
connectors |
Removable adapter on fiber optic power meter (input port).
Removable SC adapter standard with product
Optional removable adapters: LC, ST and FC |
Output (Source)
connectors |
Fixed SC adapter |
Source type &
nominal wavelength |
DTX-MFM2: 850 nm LED and 1300 nm LED
DTX-GFM2: 850 nm VCSEL and 1310 nm FP laser
DTX-SFM2: 1310 nm FP laser and 1550 nm FP laser
|
| Source power |
DTX-MFM2: ≥ -20 dBm, DTX-SFM2: ≥ -7 dBm |
| Length measurement |
DTX-MFM2: ≤ 5,000 m of 62.5 or 50 μm fiber
DTX-GFM2: ≤ 5,000 m of 62.5 or 50 μm fiber
DTX-SFM2: ≤ 10,000 m of 9 μm singlemode fiber |
| Power meter type |
InGaAs detector |
Power measurement
range |
0 to -60 dBm (1310 nm and 1550 nm)
0 to -52 dBm (850 nm) |
| VFL Specifications (23°C) |
Laser type and
nominal wavelength |
Class II CDRH, 650 nm |
| Output modes |
Continuous wave and flashing mode |
| Connector adapter |
2.5 mm universal |
| Environmental Specifications |
| Operating temperature |
0°C to 40°C |
| Storage temperature |
-20°C to 60°C |
| Safety |
CE, CSA, EN 61010-1 |
| General Specifications |
Dimensions (L x W x D),
nominal |
4.2" x 3.0" x 1.1" (106 mm x 76 mm x 28 mm) |
| Weight, nominal |
0.31 lb (0.14 kg) |
|
| |
|
Ordering Information |
| Model |
Description |
Buy Online |
Price |
| DTXCERTIFIBERM |
Fluke Networks DTX-CERTIFIBER-M Multimode CertiFiber Optical Loss Test Set; includes DTX-MFM2 & 1 set of 50μm SC/SC test reference cords |
 |
$5,945.00 |
| DTXCERTIFIBERS |
Fluke Networks DTX-CERTIFIBER-S Singlemode CertiFiber; includes DTX-SFM2 & 1 SM SC/SC test reference cords |
|
$7,785.00 |
| DTXCERTIFIBERMS |
Fluke Networks DTX-CERTIFIBER-MS Multimode and singlemode CertiFiber Optical Loss Test Set; includes DTX-MFM2 and DTX-SFM2 and 1 set each of 50μm and SM SC/SC test reference cords |
|
$10,800.00 |
| Included Accessories |
| |
|
Included |
| Optional Accessories |
| DTXCERTIFIBERMU |
Fluke Networks DTX-CERTIFIBER/MU Replacement mainframe for DTX-CLT CertiFiber |
|
$4,755.00 |
| DTXCERTIFIBERRU |
Fluke Networks DTX-CERTIFIBER/RU Replacement mainframe for DTX-CLT CertiFiber  |
|
$4,320.00 |
| DTXGFM2 |
Fluke Networks DTX-GFM2 GIGABIT MULTIMODE FIBER MODULE SET  |
|
$5,755.00 |
| DTXMFM2 |
Fluke Networks DTX-MFM2 MULTIMODE FIBER MODULE SET |
|
$5,035.00 |
| DTXMFM2IE |
Fluke Networks DTX-MFM2-IE, DTX Fiber Module Set - Industrial Ethernet |
|
$5,035.00 |
| DTXSFM2 |
Fluke Networks DTX-SFM2 SINGLEMODE FIBER MODULE SET |
|
$7,020.00 |
| NFB12LCST |
Fluke Networks NFB1/2-LC/ST Kit of Duplex MM 62.5UM and 50UM Test Cords with LC and ST Adapters |
|
$1,105.00 |
|
)
PDF
Help