| Test Result Display |
 |
Blinking [-] indicates an open circuit |
 |
Blinking [5] indicates a short |
 |
Solid [C] indicates continuity with either a 50-75 ohm ID cap or the toner unit |
 |
A solid matching number indicates continuity with one of the 8 ID caps |
 |
Blinking [ ]
indicates AC voltage (>6 volts) Solid []
indicates DC voltage (>6 volts) |
The Fluke Networks PTNX8-CT Pocket Toner NX8 Cable and Telephone
Tester Kit Cable & Telephone Kit is used for “Triple Play”
installations. The Fluke Networks PTNX8CT contains all the
essential adapters for identifying and testing telephone and TV
cables. Additionally, the small and effective Dial Tone Detective
(DTD) can instantly indicate the presence of dial tone and proper
polarity at a voice jack.
The Fluke Networks PTNX8 Pocket Toner NX8 is pocket-sized, durable
test devices that allow users to quickly and easily test voice, data,
video cables for open and short circuits, and continuity. The Fluke
Networks Pocket Toner NX-8 is ideal for identifying and testing low
voltage, singular coax cables for continuity, opens and shorts. Low
voltage protection and verification up to 52 volts.
Included in the Fluke Networks PTNX8/DLX, the Fluke Networks PTNX2
Pocket Toner NX2 tests VDV cables for continuity, AC and DC voltage
(low voltage protection and verification up to 52 volts), opens,
shorts, 50-75 Ω termination, and polarity with the optional Dial Tone
detective adapter. The Fluke Networks Pocket Toner NX2 easily confirms
if there is AC or DC voltage, an open circuit on the line, if a short
exists or if continuity is achieved. The Fluke Networks Pocket Toner
NX 2's key feature is the ability to know if the cable being tested is
connected to any device with a voltage output of up to 52 volts.
|
)
PDF Help