Fluke Networks FTK300 and FTK350
SimpliFiber™ Multimode Fiber Verification Kit, Discontinued

• Kits provide complete functionality for testing and troubleshooting in one rugged case
• Various sources offer SC or ST connections at 850nm, 1300nm, 1310nm and 1550nm wavelengths
• Auto-wavelength detection eliminates mistakes
• Set reference values for link loss measurements or use the meter alone for power readings
• Interchangeable connector adapters allow testing with multiple connector types
• Analyze test results and create professional test reports using LinkWare reporting software

Fluke Networks FTK300
And FTK350 Shown

Product Information
Datasheet	281 KB
Manual	349 KB
Ordering Info
PDF Help

SimpliFiber Optical Loss Test Kits include all the tools to verify proper installation and maintain optical fiber cabling systems. These kits provide simple and effective tools that provide you the capability to measure loss and power levels, locate faults and polarity issues and inspect connector endfaces.

Today's high-bandwidth premise networks depend on a reliable fiber optic infrastructure. Proper installation and maintenance of fiber cabling is imperative for minimizing network downtime. Whether you require basic fiber verification capabilities, advanced troubleshooting and inspection, or documented loss and power measurements, the SimpliFiber Optical Loss Test Kits are a rugged, high quality solution that meets all these needs

Which kit is right for you?

Complete Fiber Verification Kit (FTK400 & FTK 450)

The Fluke Network FTK400 and FTK450 Compete Fiber Verification Kits are for contractors and network technicians who install and maintain premise networks with both multimode and single-mode optical fiber. Use these kits to verify optical loss and power levels at 850nm, 1300nm, 1310nm and 1550nm, inspect fiber end-faces, locate cable faults, connector problems and polarity issues.  Kit combinations offer a variety of inspection options.   Choose FTK400 with FiberViewer microscope used to inspect the end-faces of fiber optic connectors only.  Choose FTK450 with FiberInspector Mini video microscope used to inspect the end-faces of fiber optic connectors and also patch panels and bulkheads.

Multimode Fiber Verification Kit (FTK300 & FTK350)

The Fluke Network FTK300 and FTK350 Multimode Fiber Verification Kits are for contractors and network technicians who install and maintain multimode premise networks. Use these kits to verify optical loss and power levels at 850nm, 1300nm, inspect fiber end-faces, locate cable faults, connector problems and polarity issues. Kit combinations offer a variety of inspection options. Choose FTK300 with FiberViewer microscope used to inspect the end-faces of fiber optic connectors only. Choose FTK350 with FiberInspector Mini video microscope used to inspect the end-faces of fiber optic connectors and also patch panels and bulkheads.

Basic Fiber Verification Kit (FTK150)

The FTK-150 Kit option is a great starter kit for contractors and network technicians who install and maintain multimode fiber optic links. Verify optical loss and power levels at 850nm and 1300nm. Add singlemode sources, microscope, and VFL options as needed.

Fiber & Copper Technician Kit (CIQ-FTK)

Choose this option if you install, maintain and troubleshoot both copper and fiber cabling. This option combines our popular CableIQ Advanced IT Kit and FTK300 Multimode Fiber Verification Kit to provide you with all the tools you need to qualify copper cabling bandwidth, verify fiber optic loss and power levels and troubleshoot both copper and fiber links.