Test Equipment Depot Top Nav Bar


	\|

Test Equipment Catalog

Specials

Repair

Surplus

Ordering/Contact Info

Fluke Net. Catalog | Price List

<< Fluke Networks SimpliFiber Pro Selection Guide

Fluke Networks FTK1350
SimpliFiber Pro Multimode Fiber Verification Kit
with FT500 FiberInspector Mini

Dual-wavelength testing
Tests multimode and singlemode fiber
Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter
Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source; calibrated wavelengths in the power meter at 1490 nm and 1625 nm also allow for readings from other sources
Offers quick remote identification of cabling runs with FindFiber Remote IDs
Conduct pre-testing and qualify cabling runs
Auto-senses source wavelength
Saves 1000 test results
Single port testing for simple network connection
Ruggedly built for demanding field use
LinkWare Cable Test Management Software documents, reports, and manages all test data

Fluke Networks FTK1350 Shown

Product Information
Datasheet	2.9 MB
Manual	2.9 MB
PDF Help

The new SimpliFiber Pro Optical Power Meter and Fiber Test Kits are the best “go-to” kits for anyone involved in first-line optical fiber cabling installation and verification. Whether you are a fiber technician or contractor, our expertly configured kits contain all the tools necessary to quickly measure loss and power levels, locate faults and polarity issues, and inspect and clean connector end-faces. Industry-leading features such as single-port dual-wavelength testing and auto-wavelength detection, combined with time-saving capabilities such as CheckActive™, FindFiber™, and Min/Max make SimpliFiber Pro the best fiber test kits on the market.

SimpliFiber Pro is an improved fiber test set that simplifies and shortens the front-line testing process by:

reducing the multiple steps and using a simultaneous dual-wavelength testing feature to measure the range of power levels in just half the time
allowing for a non-touch solution to check for a live fiber without having to plug into ports
enabling a network technician to do time-consuming procedures that normally require a team

SimpliFiber Pro Optical Power Meter and Fiber Test Kits provide you with all the tools you need to help you verify proper installation and maintain fiber-optic cabling systems. Available in kits or a la carte, these tools are simple and effective and provide you with the capability to measure loss and power levels, locate faults and polarity issues, and inspect connector end-faces.

A system approach SimpliFiber Pro is a product suite that allows you to match products and functionality to your needs. SimpliFiber Pro is made up of four unique fiber platforms: the power meter, the multimode source, the singlemode source, and the FindFiberTM Remote ID source. Each platform has uniquely competitive features, bundled in convenient kits, to meet the needs of today’s technicians. The optical power meter is included in all kits and is calibrated for accuracy at six different wavelengths (850, 1300, 1310, 1490, 1550, 1625). The meter features the ability to save a reference power level, allowing a direct display of fiber loss. It also has an intuitive four-button panel, a large LCD display screen, and a serial port. The meter’s single connector permits simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular connector styles.

Specifications
Multimode Optical Sources
Emitter Type		LED
Central Wavelength		850nm, 1300 nm
Wavelength Accuracy	850 nm	+30/-10nm
	1300nm	+/- 20nm
Spectral Width (FWHM)	850 nm	50nm (typical)
	1300nm	135nm (Typical)
Minimum Output Power		850/1300 nm: ≥ -20 dBm
Power Output Stability		1±0.1 dB over 8 hours
Auto Dual-Wavelength Switching		Yes. Can be enabled/disabled by user.
Optical Output Connector		Fixed SC2
FindFiber Code Generation		Yes. Fixed at ID 1.
Modes		CW, 2 kHz modulated, Auto-wavelength
Power Requirement)		2 AA Alkaline batteries.
Battery Life		340 hrs (typical)
Automatic Power Off		30 minutes (can be disabled by user
Physical Dimensions	Size	5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)
	Weight	908oz (278 g)
Optical Power Meter
Power Measurement Accuracy		+/-0.25 dB
Optical Connector		Removable adapter; SC adapter standard; Optional adapters include LC, ST
Detector Type		InGaAs
Calibrated Wavelengths		850, 1300, 1310, 1490, 1550, 1625
Power Measurement Range	850:	10 to -52 dBm 1300, 1310, 1490, 1550
	1625:	10 to -60 dBm
Power Measurement Linearity	850 nm:	+/- 0.2 dB; +/- 0.2 dB for power from 0 dBm to -45 dBm, +/- 0.25 dB for power < -45 dBm; 1300 nm, 1310 nm, 1490 nm, 1550 nm
	1625 nm:	+/- 0.1 dB; +/- 0.1 dB for power from 0 dBm to -55 dBm, +/- 0.2 dB for power > 0 dBm and < -55 dBm
Resolution		0.01 dB
Battery life		>50 hours typical
Memory		1000 loss or power measurements
Serial Communication Physical Interface		USB
FindFiber Source Specifications
Emitter Type		Laser
Source Connector		Fixed SC
FindFiber Code Generation		1 through 8. Default is 3.
Power On/Low-battery Indicator		LED
Power Requirement		2 AA Alkaline batteries
Battery Life		> 80 Hours (typical)
Automatic Power Off		30 minutes
Physical Dimensions	Size	7.1 in x 1.3 in x 1.0 in (17.9 cm x 3.2 cm x 2.5 cm)
	Weight	4.4 oz (125 g)
Safety		Meets Class 1 CDRH
General Specifications
Temperature Range	Operating:	-10°C to 50°C
	Storage:	-20°C to 50°C
Humidity Range	Non-Condensing:	95% (10°C to 35°C)
	Non-Condensing:	75% (35°C to 40°C)
	Uncontrolled:	<10°C
Certifications		CE, CSA, N10140, Class 1 laser-safe
Dimensions	Power Meter:	6.4in x 3.2in x 1.5in (16.5cm x 8.0cm x 3.9cm)
	MM/SM sources:	5.6in x 3.2in x 1.6in (14.2cm x 8.1cm x 4.1cm)
Weight	Power Meter:	11.5 oz (325g)
	MM/SM sources:	9.8 oz (278g)

Ordering Information
Model	Description	Buy Online	Price
FTK1350	Fluke Network FTK1350 Simplifiber Pro Multimode Fiber Verification Kit with FT500 FiberInspector Mini		$4,455.00
Included Accessories
	1 - SimpliFiber Pro optical power meter 1 - 850/1300 multimode source 1 - Carrying case 1 - VisiFault VFL 1 - FT500 FiberInspector Mini 1 - FindFiber Remote ID sources 1 - ST and LC adapter	Included
Replacement Parts and Options
SFPOWERMETER	Fluke Networks SFPOWERMETER Simplifiber PRO Optical Power Meter		$1,000.00
SFSINGLEMODE	Fluke Networks SFSINGLEMODESOURCE SimpliFiber Pro Singlemode 1310/1550 LLS		$1,835.00
SFMULTIMODE	Fluke Networks SFMULTIMODESOURCE MM Source for the SF PRO		$940.00
FINDFIBER	Fluke Networks FINDFIBER One FindFiber Remote ID source		$163.00
FINDFIBER6	Fluke Networks FINDFIBER-6 Set of six FindFiber Remote ID sources		$975.00
FT500	Fluke Networks FT500 Fiber Inspector Mini Video Microscope		$1,615.00
VISIFAULT	Fluke Networks VISIFAULT Visual Fault Locator		$325.00
Optional Accessories
NFALCSINGLE	Fluke Networks NFA-LC-SINGLE LC interchangeable adapter		$105.00
NFASCSINGLE	Fluke Networks NFA-SC-SINGLE SC interchangeable adapter		$105.00
NFASTSINGLE	Fluke Networks NFA-ST-SINGLE ST interchangeable adapter		$105.00
NFCKITBOX	Fluke Networks NFC-KIT-BOX Fiber Optic Cleaning Supplies, Includes: Cube, Pen, 2.5 Swabs, 5 Cards		$86.00
NFCKITCASE	Fluke Networks NFC-KIT-CASE Fiber Optic Cleaning Kit includes: Case, Cube, Pen, 1.25+2.5 Swabs, 10 Cards		$190.00
NFK1MANDRELKIT	Fluke Networks NFK1-MANDREL-KIT KIT,MANDREL, 3MM FIBER CABLE, 50UM AND 62.5UM		$28.00
NFK1SMPLXLC	Fluke Networks NFK1-SMPLX-LC 62.5 uM simplex test-reference cord set (SC/LC, LC/LC)		$108.00
NFK1SMPLXSC	Fluke Networks NFK1-SMPLX-SC 62.5 uM simplex test-reference cord set		$108.00
NFK1SMPLXST	Fluke Networks NFK1-SMPLX-ST 62.5 uM simplex test-reference cord set (SC/ST, ST/ST)		$108.00
NFK2SMPLXLC	Fluke Networks NFK2-SMPLX-LC 50 uM simplex test-reference cord set (SC/LC, LC/LC)		$108.00
NFK2SMPLXSC	Fluke Networks NFK2-SMPLX-SC 50 uM simplex test-reference cord set (SC/SC x 2)		$108.00
NFK2SMPLXST	Fluke Networks NFK2-SMPLX-ST 50 uM simplex test-reference cord set (SC/ST, ST/ST)		$108.00
NFK3SMPLXLC	Fluke Networks NFK3-SMPLX-LC Singlemode test-reference cord set (SC/LC, LC/LC)		$108.00
NFK3SMPLXSC	Fluke Networks NFK3-SMPLX-SC Singlemode test-reference cord set (SC/SC x 2)		$108.00
NFK3SMPLXST	Fluke Networks NFK3-SMPLX-ST Singlemode test-reference cord set (SC/ST, ST/ST)		$108.00
NFM110	Fluke Networks NFM110 Accessory Tip Set for FIBERINSPECTOR Mini (LC, FC and 1.25MM)		$270.00
NFMANDREL625	Fluke Networks NF-MANDREL-625 MANDREL, 3MM FIBER CABLE, 62.5UM (1)		$10.00
NF232	Fluke Networks NF-232 SC/SC SHORT TEST JUMPER 62.5 UM (1)		$105.00
NF234	Fluke Networks NF-234 SC/SC SHORT TEST JUMPER 50UM (1)		$105.00
NF236	Fluke Networks NF-236 SC/SC SHORT TEST JUMPER, SINGLEMODE		$105.00