| Quickly identify problems
Using the MicroScanner Pro for verification ensures basic
continuity and correct terminations.
Verification testing confirms that a cable meets
established national or international standards of conductor
configuration and passes basic continuity testing.
Verification may be performed on two conductor, or
multi-conductor twisted-air cabling. |
|
 |
Use the wiremap test to check end-to-end
continuity on all four-wire pairs to quickly verify if the cable
under test has the correct wiring scheme (either 568A or 568B) and
to identify any cabling problems. MicroScanner Pro quickly
identifies a fault allowing you to see opens, shorts, crossed
pairs, split pairs or any miswires.
|
 |
|
What happens when a fault is detected? Time is often
wasted with visual inspection. With the push of a button,
MicroScanner Pro's length function uses Time
Domain Reflectometry (TDR) to measure the full length of a
cable. It determines whether the cable is open or shorted
while telling you the distance to the fault.
The length measurement is also useful for billing and
inventory purposes. It displays individual pair lengths and
tells you if the cable is connected to an active hub. |
Identify cabling links from the wiring closet
MicroScanner Pro also features the Office/Room
function, which allows you to identify cabling drops for
an office or room during adds, moves and changes. It helps
determine routing at the patch panel and documents twisted
pair and COAX networks easily.
Toner function for tracing and locating
cables
MicroScanner Pro's Toner
function allows you to use one of four unique tone
songs for use with the optional IntelliTone Probe or
any other analog probe to trace and locate hidden
cabling in walls, ceilings or distributions panels.
|
|
 |
|
|
|
)
PDF Help