|
|
|
|||||
|
||||||
<< Fluke
Thermal ImagersFluke Ti50 and Fluke Ti55
|
|||||||||||||||||||||||||
Choose the Fluke Ti50 or Ti55 models when you need the best images. They feature 320 x 240 detectors with industry leading thermal sensitivity (≤ 0.05 °C NETD) for high resolution, ultra high-quality images. In addition, with a 60 Hz detector acquisition rate temperatures are displayed live on the large 5-inch color display The FT models feature the innovative IR-Fusion™ technology. IR-Fusion captures a visible light image in addition to the infrared image and takes the mystery out of IR image analysis. It helps to better identify and report suspect components and enable the repair to be done right the first time. To find out more select IR-Fusion on the link located on the top of this page. |
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
See exactly what you are viewing Fluke IR-Fusion™ technology (available on FT models) links a real world visual image with a thermal image. It merges the two images into one, with the possibility to blend between the two images or create picture-in-picture combinations. Alarm limits can be superimposed over the visible light image to exactly pinpoint the components exceeding a specified temperature limit. Both the visual images and thermal images are available for use in reports. This speeds up documentation by reducing the need to look for individual images taken with a separate digital camera. IR-Fusion helps to better identify and report suspect components and enable the repair to be done right the first time. Large, sharp thermal images Thanks to the largest display (five-inch) available on this type of thermal imager in combination with low-noise VOx sensors, the Fluke IR FlexCam units produce exceptionally high-quality images making even the smallest temperature differences visible. This is comparable with images normally only obtained on far more expensive instruments. A sharp image in every situation The innovative 180 ° articulating lens makes it possible to view and capture images in areas with poor accessibility. The display remains clearly visible while viewing over high objects, under a machine or around immoveable obstructions. The SmartFocus wheel simplifies getting a stable and sharp image. No need to take your hand off the instrument to turn a focus ring. Make anomalies visible Thanks to built-in functions like AutoCapture, the IR FlexCam Thermal Imagers help to troubleshoot difficult problems. The instrument is easily set up to automatically capture only those images where a temperature limit is exceeded. This way, difficult to find intermittent problems can be captured and analyzed quicker by concentrating only on the images containing the anomalies. Analysis and reporting comes standard The SmartView™ software (supplied with the Fluke Ti40, Ti45, Ti50, and Ti55) includes a complete range of infrared image viewing, analysis, annotation and reporting tools. It even allows for customized reports to accommodate specific company work processes or requirements like multiple image reporting and comparisons. To find out more select SmartView on the the link located at the top of the page. Radiometric measurement – the 'data behind the picture' Fully radiometric thermal imagers capture and store calibrated temperature data for the matrix of thousands of points that make up a thermal image. This makes it possible to perform detailed analysis and change key parameters like emissivity or temperature range either in the field on the camera or in the office using the PC software. |
|||||||||||||||||||||||||
| Model |
Description |
Buy Online |
Price |
| Ti50FT1020 | Fluke Ti50FT-10/20 IR Flexcam Thermal Imager,320,S F/W, FUSN, 10.5/20MM |
 |
$21,830.00 (Reg. $26,330.00) |
| Ti50FT102054 | Fluke Ti50FT10/20/54 IR Flexcam Thermal Imager,320,S F/W,FUSN, 10.5/20/54MM |
|
$27,130.00 (Reg. $31,630.00) |
| Ti50FT20 | Fluke Ti50FT-20 IR Flexcam Thermal Imager,320,S F/W,FUSION,20MM |
|
$18,490.00 (Reg. $22,990.00) |
| Ti50FT2054 | Fluke Ti50FT-20/54 IR Flexcam Thermal Imager,320,S F/W,FUSION 20/54MM |
|
$23,790.00 (Reg. $28,290.00) |
| Ti55FT1020 | Fluke Ti55FT-10/20 IR Flexcam Thermal Imager,320,D F/W,FUSN, 10.5/20MM |
|
$25,330.00 (Reg. $29,830.00) |
| Ti55FT102054 | Fluke Ti55FT-10/20/54 IR Flexcam Thermal Imager,320,D F/W,FUSN, 10.5/20/54MM |
|
$30,630.00 (Reg. $35,130.00) |
| Ti55FT20 | Fluke Ti55FT-20 IR Flexcam Thermal Imager,320,DLX F/W,FUSION,20MM |
|
$21,990.00 (Reg. $26,490.00) |
| Ti55FT2054 | Fluke Ti55FT-20/54 IR Flexcam Thermal Imager,320,D F/W,FUSN, 20/54MM |
|
$27,290.00 (Reg. $31,790.00) |
|
Factory Refurbished Units |
|||
|
All Refurbished Units are Factory Refurbished with a Factory Warranty. Supplies are Limited! |
|||
| Ti55FT20U | Fluke Ti55FT-20U IR Flexcam Thermal Imager, 320, DLX F/W, FUSION, 20MM, Refurbished - Special Price! |
|
$18,543.00 (Reg. $26,490.00) |
| Included Accessories | |||
|
Included | ||
| Replacement Accessories | |||
| 103232 | Fluke 103232 Hood, Anti-Glare |
|
$200.00 |
| 104351 | Fluke 104351 Power Adapter, Truck Cord, IR FLEXCAM |
|
$220.00 |
| 104354 | Fluke 104354 Neck Strap, IR FLEXCAM |
|
$20.00 |
| 104411 | Fluke 104411 Padded Neck Strap |
|
$30.00 |
| 104472 | Fluke 104472 Carry Case, FLEXCAM |
|
$370.00 |
| 104543 | Fluke 104543 Vehicle Adapter, Battery Charger, FLEXCAM |
|
$190.00 |
| 104585 | Fluke 104585 Cord, Power, FLEXCAM Power Supply |
|
$35.00 |
| 104831 | Fluke 104831 Laser Pointer Assembly, INSIGHT |
|
$270.00 |
| 105025 | Fluke 105025 Black Carrying Case, IR Insight |
|
$370.00 |
| 105064 | Fluke 105064 Micro Fiber Cloth, FLEXCAM |
|
$5.00 |
$20.00 Minimum on Total Order
Home Page | Test Equipment Catalog | Specials | Repair
We Buy Surplus | Ordering/Contact Info
____________________________________________________________
99 Washington Street, Melrose, MA 02176
781.665.1400 | 800.517.8431 | Fax: 781.665.0780 | Email:
Copyright © Fotronic Corporation All Rights Reserved
