HOME > FLUKE > THERMAL > TI10 fluke logo

Fluke Ti10 Thermal Imager

  • Enhanced problem detection and analysis capabilities with IR-Fusion® Technology.
  • Optimized for field use in harsh work environments.
  • Engineered and tested to withstand a 2 m (6.5 ft) drop
  • Withstands dust and water—tested to an IP54 rating.
  • Delivers the clear, crisp images needed to find problems fast.
  • Identify even small temperature differences that could indicate problems with excellent thermal sensitivity (NETD).
  • Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb.
  • Everything needed to get started is included.
  • Adjustable hand strap for left-or right-handed use.

Fluke Ti10 Images Shown

Product Information
Datasheet 589 kBPDF
Thermography Benefits Flash
FOV Calculator Flash
Chip Wade Demo Movie
PDF HelpPDF Help
 
The Fluke Ti10 is a perfect tool to add to your problem solving arsenal with it's plethora of options and abilities. Built for tough work environments, the fluke Ti10 is a high-performance, fully radiometric imagers are ideal for troubleshooting electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others.



IR-Fusion captures infrared and visual (visible light) images and simultaneously displays the images fused together, adding a new dimension of detail that saves time and money and best conveys infrared information of each specific application and environment. Viewing modes include:
  • Full Infrared – high-resolution standard infrared images.
  • Full Visible Light (this mode available only in the software on the Fluke Ti25 and Ti10 models) – a visual (visible light) image like you would get with a digital camera.
  • Picture-in-Picture – an IR image portal surrounded by a visual (visible light) frame for reference.
  • Auto (Automatic) Blending – combines infrared and visual (visible light) images blended together at user-adjustable levels for the greatest image clarity.
  • IR/Visible Alarm (this mode available only in the software on the Fluke Ti25 and Ti10 models) – displays only the portions of the image that fall above, below or between a user-specified temperature range as IR, leaving the remainder of the image as full visual (visible light).
Fusing infrared and visual (visible light) images, the fluke Ti10 is capable of communicating critical information faster and easier, which makes traditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. IR-Fusion helps users recognize image details and better identify problem areas by quickly scrolling through the different viewing modes. This IR-Fusion technology comes as a standard on all Ti10 models.

The rugged Fluke Ti10 Thermal Imagers can withstand up to a drop of 6.5 feet (2 meters), and are IP54 rated to withstand water and dust. With a widescreen full color LCD display, optimized thermal sensitivity, and a temperature measurement range of -20 °C to +250 °C for the Ti10 , the thermal imagers are suitable for most industrial, electrical and commercial applications, allowing users to operate from a safe distance and still see small temperature differences.
 
Fluke SmartView™ software  is included with each thermal imager, along with free software upgrades for the life of the product. A modular suite of tools for viewing, annotating, editing and analyzing infrared images, SmartView software fully supports Fluke IR-Fusion technology, enabling users to edit images in five viewing modes and generate customizable, professional-looking reports in a few steps.

The Fluke Ti10 includes a 2 GB SD memory card that will store at least 3,000 basic infrared images (.bmp file format) or 1,200 fully radiometric (.is2 IR Fusion file format) infrared and linked visual images, each with 60 seconds of voice annotation, as well as an USB SD card reader for downloading images into a computer. Each thermal imager comes with a rugged hard carrying case and a soft transport bag, an adjustable hand strap for right- or left-handed use, rechargeable internal battery and AC power supply/battery charger (including mains adapters).
 
Fluke Ti10 Specifications
Temperature measurement range
(not calibrated below -10 °C)
-20 °C to +250 °C (-4 °F to + 482 °F)
Accuracy ± 5 °C or 5 % (whichever is greater)
Imaging
performance
Field of view < 0 °C (32 °F): ± (1.0 °C (± 2.0 °F) + 0.1°/1 °C or °F)
Spatial resolution (IFOV) 2.5 mRad
Minimum focus distance Thermal lens: 15 cm (6 in)
Visible (visual) light lens: 46 cm (18 in)
Focus Manual
Image frequency 9 Hz refresh rate
Detector type 160 X 120 focal plane array, uncooled microbolometer
Infrared lens type 20 mm F = 0.8 lens
Thermal sensitivity (NETD) ≤ 0.2 °C at 30 °C (150 mK)
Infrared spectral band 7.5 μm to 14 μm
Visual camera 640 x 480 resolution
Image
presentation
Palettes Ironbow, blue-red, high contrast, grey
Level and span Smooth auto-scaling and manual scaling of level and span
Minimum Span Manual 5 °C (9 °F)
Auto 10 °C (18 °F)
IR-Fusion® information Full infrared or picture-in-picture
Picture-In-Picture (PIP) 100 % IR displayed in center 320 x 240 pixels
Full screen (PIP off) 100 % IR displayed in center 640 x 480 LCD
Image and data storage Measurement Range SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60 seconds voice annotations or 3000 basic (.bmp) IR images)
File formats Non-radiometric (.bmp) or fully-radiometric (.is2)No analysis software required for non-radiometric (.bmp) files
Export file formats w/SmartView™ software JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF
General Display 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD with backlight (selectable bright or auto)
Power Battery: Internal rechargeable battery pack (included)
Battery life: Three to four hours continuous use (assumes 50 % brightness of LCD)
Battery charge time using ac adapter/charger and dc car charger: Two hours for full charge
 
Ordering Information
Model Description Buy Online Price
FLK-TI10 9HZ Fluke Ti10 9 Hz Thermal Imager, Thermal Imaging Camera w/20 mm lens Buy Now $4,599.95
Included Accessories
 
  • 1 - AC power supply/battery charger (including mains adapters)
  • 1 - SD memory card
  • 1 - SD card reader (USB)
  • 1 - SmartView™ software
  • 1 - Rugged hard, carrying case
  • 1 - Soft transport bag
  • 1 - Hand strap
  • 1 - Users manual
  • 1 - Warranty registration card
Included
Replacement Accessories
Fluke 050-CLKT Fluke 050-CLKT 2" (50mm) Infrared (IR) Window with Kwik Twist Cover Buy Now Sale $166.95
(Reg. $199.95)
Fluke 075-CLKT Fluke 075-CLKT 3" (75mm) Infrared (IR) Window with Kwik Twist Cover Buy Now Sale $269.96
(Reg. $299.95)
Fluke 075-CLKTO Fluke 075-CLKTO 3" (75mm) C-Range Indoor Infrared (IR) Window, Medium Voltage, with Kwik Twist Cover Buy Now Sale $224.96
(Reg. $249.95)
Fluke 100-CLKT Fluke 100-CLKT 4" (100mm) Infrared (IR) Window with Kwik Twist Cover Buy Now Sale $359.96
(Reg. $399.95)
Fluke TI Car Fluke TI-CAR CHARGER Adapter for Charger Buy Now Sale $115.25
(Reg. $119.95)
Fluke TI Visor Fluke T-Visor Thermal Imager Visor attachment for the Ti10/Ti25/TIR/TIR1 Buy Now Sale $76.85
(Reg. $79.95)
Hawk IR Windows
Fluke 050-CLKT Fluke 050-CLKT 2" (50mm) Infrared (IR) Window with Kwik Twist Cover Buy Now Sale $166.95
(Reg. $199.95)
Fluke 075-CLKT Fluke 075-CLKT 3" (75mm) Infrared (IR) Window with Kwik Twist Cover Buy Now Sale $269.96
(Reg. $299.95)
Fluke 075-CLKTO Fluke 075-CLKTO 3" (75mm) C-Range Indoor Infrared (IR) Window, Medium Voltage, with Kwik Twist Cover Buy Now Sale $224.96
(Reg. $249.95)
Fluke 075 CLV Fluke 075-CLV 3" CLV Infrared Window for indoor low-voltage applications Buy Now Sale $202.46
(Reg. $224.95)
Fluke 100-CLKT Fluke 100-CLKT 4" (100mm) Infrared (IR) Window with Kwik Twist Cover Buy Now Sale $359.96
(Reg. $399.95)
Instrument Care Plan for Thermal Imagers
Bronze Care Plans
BCP-TI10/TIR Fluke BCP-TI10/TIR 1 Year Bronze Care Plan for the Fluke Ti10 & TiR Buy Now Sale $362.70
(Reg. $403.00)
Fluke B2P-Ti10/TiR Fluke B2P-TI10/TIR 2 Year Bronze Care Plan for the Fluke Ti10 & TiR Buy Now Sale $583.20
(Reg. $648.00)
B3P-TI10/TIR Fluke B3P-TI10/TIR 3 Year Bronze Care Plan for the Fluke Ti10 & TiR Buy Now Sale $688.50
(Reg. $765.00)
Silver Care Plans
Fluke SCP-Ti10/TiR Fluke SCP-TI10/TIR 1 Year Silver Care Plan for the Fluke Ti10 & TiR Buy Now Sale $551.70
(Reg. $613.00)
Fluke S2P-Ti10/TiR Fluke S2P-TI10/TIR 2 Year Silver Care Plan for the Fluke Ti10 & TiR Buy Now Sale $1,029.95
(Reg. $1,030.00)
S3P-TI10/TIR Fluke S3P-TI10/TIR 3 Year Silver Care Plan for the Fluke Ti10 & TiR Buy Now $1,569.00
Priority Gold Care Plans
GCP-TI10/TIR Fluke GCP-TI10/TIR 1 Year Priority Gold Care Plan for the Fluke Ti10 & TiR Buy Now Sale $586.80
(Reg. $652.00)
G2P-TI10/TIR Fluke G2P-TI10/TIR 2 Year Gold Priority Gold Plan for the Fluke Ti10 & TiR Buy Now $1,282.00
G3P-TI10/TIR Fluke G3P-TI10/TIR 3 Year Priority Gold Care Plan for the Fluke Ti10 & TiR Buy Now $1,830.00