Phone 800-517-8431

Fluke TI27 60HZ

60 HZ, 240 x 180, 1.67 mRad, Industrial-Commercial Thermal Imaging Camera (-4 - 302°F)

Request a Quote Below
For Pricing Considerations

Status: Discontinued
Replaced By: TI30060HZ
Brand: Fluke
Model No: TI27 60HZ
MPN: 4000255
Our Model No: TI27
Condition: NEW
PDF Document Icon Data Sheet (1.61 MB)
TI27 60HZ


Not Available
Request a Quote

Product Features:

  • Thermal sensitivity ≤ 0.05°C @ 30°C target temperature (50 mK)
  • 3.7 in (9.1 cm) diagonal landscape color VGA (640 x 480) LCD with backlight and clear protective cover
  • User selectable temperature scale (°C/°F)
  • Language selection
  • Time/Date set
  • Emissivity selection
  • Reflected background temperature compensation
  • Transmission correction
  • User selectable hot spot and cold spot, and center point on image (other custom markers and shapes in SmartView software)
  • High temperature alarm
  • User selectable backlight: "Full Bright" or "Auto"
  • Information display preference
  • SmartView full analysis and reporting software included


  • Industrial - mechanical, electromechanical and general building maintenance
  • Process - refractory insulation, tank and vessel levels, steam systems and traps, pipes and valves, etc.
  • Electrical - unbalanced loads, overloaded systems, wiring mistakes or component failure, etc.

The Fluke TI27 60 HZ, 240 x 180, 1.67 mRad, Industrial-Commercial Thermal Imaging Camera (-4 - 302°F) offers the greatest technological advancement in thermography - capture images and analyze data right out of the box. Leading thermal sensitivity and spatial resolution combined with a high definition display creates the sharpest images in the industry. With a simple push of your thumb, go from one-handed manual smart focus, to adding picture-in-picture and even voice comments to your images. Before a TI27 gets into your hands, we drop it from ours. Only Fluke thermal imagers are Torture tested, designed from the inside out to withstand a 6.5 ft drop.

IR-Fusion Technology: Precisely Blended Images Offer More Detail

Infrared images alone can be difficult to understand, which is why Fluke pioneered IR-Fusion technology. Automatically capture a visible image with every infrared image; this allows you to always know exactly what you are looking at. And image quality is everything when it comes to quickly analyzing infrared images - you need the right level of detail to pinpoint specific areas of concern. IR-Fusion blends visible light and infrared images to capture a clear 5MP real-world picture of your target. Blend at different preset levels and add picture-in-picture (PIP) to capture an incredibly revealing hybrid image.

Full IR-Fusion

Full IR-Fusion

75% Blending

75% Blending

Picture-in-Picture Mode (PIP)

Picture-in-Picture Mode (PIP)

Fluke SmartView Software

Navigate, Analyze and Enhance IR Images

   Powerful, modular suite of software tools for viewing, annotating, editing and analyzing infrared images
   Generate fully customizable and professional-looking reports in a few easy steps
   Full support of IR-Fusion Technology lets you edit images in five viewing modes
   Easy to use, yet delivers high-end analysis performance

Image Viewing and Editing

   Display array of open images for convenient selection and analysis
   Scroll across images to display temperature at any given point
   Edit color palettes, reference images, markers and emissivity

Extensive Annotation Possibilities

   Organize data with extensive annotations
   Add annotations (text comments) to images and reports
   Input information such as locations, category and other notes
   Referenced images can be linked for good/bad and before/after analysis

Simplified Report Generation

Detailed Analysis and Total Image Control

   Alter level, span and palette selection to enhance contrast or display detail more effectively
   Unlimited standard and user-defined analysis markers
  Five viewing modes allows you to choose best images

Simplified Report Generation

   Generate professional, customized reports fast
  One-click standardized report generation for quick results
  Choice of features including before/after, IR plus visible light, annotations, supporting data, graphics and charts
  Report wizard guides user through report generation

Temperature measurement range (not calibrated below -10 °C) -20 °C to +600 °C (-4 °F to +1112 °F)
Temperature measurement accuracy ± 2 °C or 2 % (at 25 °C nominal, whichever is greater)
On-screen emissivity correction Yes
On-screen reflected background temperature compensation Yes
On-screen transmission correction Yes
Imaging performance
Image capture frequency 9 Hz refresh rate or 60 Hz refresh rate depending upon model variation
Detector type Focal Plane Array, uncooled microbolometer, 240 x 180 pixels
Thermal sensitivity (NETD) ≤ 0.05 °C at 30 °C target temp (50 mK)F
Total pixels 43,200
Infrared spectral band 7.5 μm to 14 μm (long wave)
2.0 Megapixel industrial performance visual (visible light) camera minimum focus distance 45 cm (approx. 18 in)
Field of view 23 ° x 17 °
Spatial resolution (IFOV) 1.67 mRad
Minimum focus distance 15 cm (approx. 6 in)
Focus mechanism Manual, one-handed Smart Focus capability
Image presentation
Standard color palette Ironbow, blue-red, high-contrast, amber, amber inverted, hot metal, grayscale, grayscale inverted
Ultra Contrast color palette Ironbow ultra, blue-red ultra, high-contrast ultra, amber ultra, amber inverted ultra, hot metal ultra, grayscale ultra, grayscale inverted ultra
Level and span Smooth auto-scaling and manual scaling of level and span
Fast auto toggle between manual and auto modes Yes
Fast auto-rescale in manual mode Yes
Minimum span (in manual mode) 2.5 °C (4.5 °F)
Minimum span (in auto mode) 5 °C (9 °F)
IR-Fusion information
Automatically aligned (parallax corrected) visual and IR blending Yes
Picture-In-Picture (PIP) Three levels of on-screen IR blending displayed in center of LCD
Full screen infrared Three levels of on-screen IR blending displayed on LCD
Color alarms (temperature alarms) High-temperature alarm (user-selectable)
Voice annotation 60 seconds maximum recording time per image; reviewable playback on imager
Image capture and data storage
Image capture, review, save mechanism One-handed image capture, review, and save capability
Storage medium SD Memory Card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60 seconds voice annotations, or 3000 basic bitmap (.bmp) images, or 3000 jpeg (.jpeg) images; transferrable to PC via included multi-format USB card reader
File formats Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2); No analysis software required for non-radiometric (.bmp and .jpeg) files
Export file formats w/SmartView software BMP, DIB, GIF, JPE, JFIF, JPEG, JPG, PNG, TIF, and TIFF
Memory review Thumbnail view navigation and review selection
General specifications
Operating temperature -10 °C to +50 °C (14 °F to 122 °F)
Storage temperature -20 °C to +50 °C (-4 °F to 122 °F) without batteries
Relative humidity 10 % to 95 % non-condensing
Display 9.1 cm (3.7 in) diagonal landscape color VGA (640 x 480) LCD with backlight and clear protective cover
Software SmartView full analysis and reporting software included
Batteries Two lithium ion rechargeable smart battery packs with five-segment LED display to show charge level
Battery life Four+ hours continuous use per battery pack (assumes 50 % brightness of LCD)
Battery charge time 2.5 hours to full charge
AC battery charging Two-bay ac battery charger (110 V ac to 220 V ac, 50/60 Hz) (included), or in-imager charging; AC mains adapters included
AC operation AC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz); AC mains adapters included
Power saving Sleep mode activated after five minutes of inactivity, automatic power off after 30 minutes of inactivity
Safety standards CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.01
Electromagnetic compatibility Meets all applicable requirements in EN61326-1:2006
C Tick IEC/EN 61326-1
US FCC CFR 47, Part 15 Class B
Vibration 0.03 g2/Hz (3.8 grms), IEC 68-2-6
Shock 25 g, IEC 68-2-29
Drop 2 meter (6.5 feet) with standard lens
Size (H x W x L) 27.7 cm x 12.2 cm x 17.0 cm (10.9 in x 4.8 in x 6.7 in)
Weight (battery included) 1.05 kg (2.3 lb)
Enclosure rating IP54 (protected against dust, limited ingress; protection against water spray from all directions)
Recommended calibration cycle Two-years (assumes normal operation and normal aging)
  • 1 - AC Power Supply
  • 1 - Battery Pack Charger with Mains Adapters
  • 2 - Rugged Lithium-Ion Smart Battery Packs
  • 1 - SD Memory Card
  • 1 - Multi-Format USB Memory Card Reader
  • 1 - SmartView Software with Free Upgrades for Life
  • 1 - Rugged Hard Carrying Case
  • 1 - Soft Transport Bag
  • 1 - Adjustable Hand Strap
  • 1 - Printed User Manual
  • 1 - Warranty Registration Card
Model Description Buy Now Price
TI-VISOR Fluke TI-VISOR Camera Visor for Models Ti25, Ti27, Ti29, Ti32, TiR27, TiR29 and TiR32 Add to Cart
Sale $67.95
TI-TRIPOD Fluke TI-TRIPOD Tripod Mounting Base for Models Ti25, Ti27, Ti29, Ti32, TiR27, TiR29 and TiR32 Add to Cart
Sale $114.95
Model Description Buy Now Price
BOOK-ITP Fluke BOOK-ITP Introduction to Thermography Principles Add to Cart
Sale $27.29
Model Description Buy Now Price
LENS/TELE1 Fluke LENS/TELE1 Telephoto Infrared Lens, 8.6° x 6.5° FOV (Ti32 only) Add to Cart
Sale $899.99
LENS/WIDE1 Fluke LENS/WIDE1 Wide-angle Infrared Lens, 42.5° x 32.5° FOV (Ti32 only) Add to Cart


Power Supply
Model Description Buy Now Price
TI-CAR CHARGER Fluke TI-CAR CHARGER Car Charger for Thermal Imagers (Not Compatible with FlexCam Models) Add to Cart
Sale $114.39
Wirelessly Download Thermal Images from Your Fluke Infrared Camera into SmartView Mobile software
Wirelessly Download Thermal Images from
IR Camera to SmartView Mobile Software
How To Transfer Images From A Thermal Imager To SmartView Software
How To Transfer Images from
Thermal Imager to SmartView Software
IR-Fusion Industrial Video:
Fluke Thermal Imaging
How to Use IR Fusion Technology with AutoBlend Mode in Your Thermal Inspections
How to Use IR Fusion Technology with
AutoBlend Mode in Thermal Inspections
Data Sheet: PDF Document Icon (1.61 MB)
Manual: PDF Document Icon (1.01 MB)
↑ Back to Top