Fluke TiR110
160 x 120 resolution, -20 to 150°C (-4 to 302°F)
9 Hz Building Diagnostic Thermal Imager
with IR-OptiFlex focus system, IR-Photonotes, and Electronic compass

Product Images
Fluke TiR110 Front of the Fluke TiR110 Back of the Fluke TiR110
Product Information
Datasheet 2.04 MB PDF
Software 1.23 MB PDF
Ti1xx Series Movie
PDF HelpPDF Help
  • Exclusive IR-OptiFlex focus system
  • IR-PhotoNotes annotation system
    • Attach up to 3 visible images per file; pen and paper unnecessary
    • Capture important information for more thorough analysis and reporting
  • Multi-mode video recording—focus-free video in visible light
    • Capture focus-free video of objects 4 feet away and beyond in visible light, infrared with full IR-Fusion capabilities
    • Great for documentation, training, marketing
    • Capture radiometric video
    • Perform frame-by-frame analysis
  • Infrared with IR-Fusion technology
    • Picture-in-Picture mode gives excellent alignment between infrared and visible images
    • AutoBlend mode blends partially transparent infrared and visible images into single view
    • Color alarms show infrared within user-selected temperature ranges
  • IR-Optiflex focus system
    • Focus free from 4 ft and beyond
    • One-touch manual focus for closer views
    • Performs scans significantly faster
    • Eliminates focusing frustration
    • True point-and-shoot ease of use
  • Capturing an image in portrait or landscape is easy
  • Voice Annotation
  • Wide field of view; with no optional lens
  • Image rotation in SmartView for analysis and reporting purposes
  • Electronic Compass: Eight-point cardinal compass readings
    • Know the direction and location of problem area
    • Readings can be easily inserted into images and reports
    • More easily capture critical information for analysis, reporting, and communicating potential problems
  • Detector type – Vanadium oxide (Vox)
    • Provides a clearer image
    • Withstands higher heat and radiation than amorphous silicone
  • Multi-mode video recording
    • Record video in visible light and infrared with full IR-Fusion
    • Standard MPEG-encoded AVI format
  • Built-in Laser Pointer/Torch
  • Smart battery system
    • Replaceable, rechargeable lithium-ion batteries
    • One-touch power level indicator on the battery
    • Easy to remove and replace, with or without gloves
  • Light weight and well balanced
    • 1.6 lbs, well balanced
    • Easy to use in both portrait and landscape view
  • Rugged Design
    • Designed to pass 2-meter drop test
    • Tested to withstand vibration, electromagnetic, radio frequency interference, temperature extreme, high humidity
    • Recessed protected lens, lens guard, integrated lens cover, durable display, adjustable hand strap
  • SmartView Software
    • Included with purchase of thermal imager
    • Advanced analysis features
    • Quick reporting and customizable reporting
    • Easy to use; free upgrades; free license sharing

The Fluke TiR110 160 x 120 IR resolution, Industrial-Commercial Thermal Imager is the lightest, most rugged and easiest–to-use professional thermal imagers. Whether you’re searching for air leaks, hidden moisture, construction defects, or other building issues, a Fluke thermal imager delivers a huge competitive advantage—it allows you to work faster and more efficiently, and document your findings. Thanks to it's increased thermal sensitivity, the Fluke TiR 110 is more sensitive and accurate to changes in temperature and finding problem spots, helping people spot structural problems before they cause damage.

Key features

  • Exclusive Fluke IR-OptiFlex focus system—ensures that images taken with the Fluke TiR110 Industrial-Commercial Thermal Imager are in good focus from 1.2 meters (4 feet) and beyond for optimum image clarity and scanning convenience. For shorter distances change to manual mode with the touch of a finger
  • Always have references handy: IR-PhotoNotes annotation system - Quickly identify and keep track of inspection locations by adding digital images of important information and surrounding areas.
  • Voice Annotation: Add 60 seconds of voice annotation directly on the camera to quickly note and record comments in the field. Easily review voice comments or camera or in SmartView software. No Clumsy headsets, microphones, or earpeices are necessary.
  • Multi-mode video recording—focus-free video in visible light and infrared with full IR-Fusion.
  • Easily communicate the location of problems with the Electronic Compass (8-Point Cardinal).

Ideal for use with/for:

  • Industrial, mechanical, electromechanical and general building maintenance.
  • Process, refractory insulation, tank and vessel levels, steam systems and traps, pipes and valves, etc.
  • Electrical, unbalanced loads, overloaded systems, wiring problems or component failure, etc.

Patented Fluke IR-Fusion Technology
Enjoy the industry’s only point-and-shoot IR-Fusion camera. Fluke patented technology provides the user with both a digital and an infrared image in one to precisely document problem areas.

IR-OptiFlex focus system
Scan for issues significantly faster than before with Fluke’s revolutionary, ultra-rugged focus system. The Fluke TiR100's IR-OptiFlex focus system gives you optimum focus by combining focus-free, ease-of-use with the flexibility of manual focus on the same camera.

Ideal for use with/for:

  • Building problems, defects and general maintenance
  • Energy audit, building inspection, and weatherization
  • Restoration, water damage, and roofing
Detailed specifications of the Fluke TiR110
IR resolution (FPA size) 160 x 120 FPA Uncooled Microbolometer
Spectral band 7.5 μm to 14 μm (long wave)
Capture or refresh rate 9 Hz
NETD (Thermal sensitivity) ≤ 0.08°C at 30°C target temp (80 mK)
FOV (Field of view) 22.5 °H x 31 °V
IFOV (Spatial resolution) 3.39 mRad
Temperature measurement range
(not calibrated below -10°C)
-20°C to +150°C (-4°F to +302°F)
Temperature measurement accuracy ± 2°C or 2% (at 25°C nominal, whichever is greater)
IR-Fusion technology IR-OptiFlex focus system
Focus mechanism PIP, FULL IR, FULL VISIBLE, AutoBlend
Color alarms High temperature, low temperature, isotherm
Standard palettes Blue-Red, Grayscale, Inverted Grayscale, High-contrast, Hot Metal, Ironbow, Amber, Inverted Amber
Ultra Contrast palettes Blue-Red, Grayscale, Ironbow
User definable spot markers Three on camera and in SmartView
Centerbox (MIN/AVG/MAX) Yes
Level and span control Manual and auto
Minimum span in auto mode 2.5°C
Minimum span in manual mode 2°C
Minimum IR focus distance 15.25 cm (6 in)
Weight 0.726 kg (1.6 lb)
Size 11.2 x 3.4 x 5.3 in(28.4 x 8.6 x 13.5 cm)
LCD display 3.5 inch diagonal (portrait format)
Visible camera 2 megapixel industrial-grade
Minimum automatic parallax correction ~18-22 inches
IR-PhotoNotes annotation system Yes (3 images)
Laser pointer Yes
Torch Yes
Electronic (cardinal) compass Yes
Emissivity correction Yes
Transmission correction Yes
Background (reflected)
Voice annotation (audio) Yes (60 seconds) per image
Multi-mode video recording
(standard avi w/ mpeg encoding)
Yes (AVI with MPEG encoding, up to 5 minutes)
Memory review Thumbnail review
Battery (field-replaceable, rechargeable) Two
Battery life 4+ hours
Charging power supply 2 meter (6.5 feet)
Drop test 2 meter (6.5 feet)
Ingress protection (IP) rating (IEC 60529) IP 54
Recommended Calibration cycle Two-years
Memory storage 2 GB SD memory card
Direct download capability mini USB download direct to PC
Operating temperature range -10°C to +50°C (14°F to 122°F)
Storage temperature range -20°C to +50°C (-4°F to 122°F)
Operating humidity Operating and storage 10% to 95%, Non-condensing
Vibration and shock 2G, IEC 68-2-26 and 25G, IEC 68-2-29
Safety standards CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.01
C Tick IEC/EN 61326-1
EMI, RFI, EMC EN61326-1; FCC Part 5
Ordering Information
Model Description Buy Online Price
TIR110 9HZ
MFR ID: 3810353
Fluke TiR110 9 Hz 160 x 120, Building Diagnostic Thermal Imager w/ IR-OptiFlex focus (-4 to 302 °F) Buy Now $4,499.95
Included Accessories
  • 1 - AC power adapter
  • 1 - Lithium ion smart battery
  • 1 - USB cable
  • 1 - SD memory card
  • 1 - hard carrying case
  • 1 - soft transport bag
  • 1 - adjustable hand strap (left- or right-handed use)
  • 1 - Users manual
  • 1 - SmartView software and warranty registration card
  • 1 - two-bay charging base
  • 1 - multi-format USB memory card reader
Optional Accessories
MFR ID: 3039779
Fluke TI-CAR CHARGER Adapter for Charger Buy Now Sale $114.39
(Reg. $129.99)
MFR ID: 3413459
Fluke BOOK-ITP Introduction to Thermography Principles Buy Now Sale $27.29
(Reg. $29.99)
MFR ID: 3996500
Fluke TI-VISOR2 Sun Visor for the Fluke TI1XX Series Buy Now Sale $70.95
(Reg. $79.99)
MFR ID: 3996517
Fluke TI-TRIPOD2 Tripod Mounting Accessory for the Fluke Ti1xx Series Buy Now Sale $114.95
(Reg. $129.99)
Hawk IR Windows
MFR ID: 3460346
Fluke 050-CLKT 2" (50mm) Infrared (IR) Window with Kwik Twist Cover Buy Now Sale $165.99
(Reg. $199.99)
MFR ID: 3460387
Fluke 075-CLKT 3" (75mm) Infrared (IR) Window with Kwik Twist Cover Buy Now Sale $269.99
(Reg. $299.99)
MFR ID: 3460611
Fluke 075-CLKTO 3" (75mm) C-Range Indoor Infrared (IR) Window, Medium Voltage, with Kwik Twist Cover Discontinued
MFR ID: 3460609
Fluke 075-CLV 3" CLV Infrared Window for indoor low-voltage applications Discontinued
MFR ID: 3460439
Fluke 100-CLKT 4" (100mm) Infrared (IR) Window with Kwik Twist Cover Buy Now Sale $359.99
(Reg. $399.99)