
	\|

Test Equipment Catalog

Specials

Repair

Surplus

Ordering/Contact Info

Fluke Catalog | Fluke Price List

<< Fluke ScopeMeters

Fluke 196C and Fluke 199C
Color ScopeMeters
Discontinued
see: 190102

Fluke 190C Shown

Product Information
Features Overview	HTML
Virtual Demo	Flash
Accessories	467 KB
Brochure	499 KB
Datasheet	220 KB
Manual	2.5 MB
Ordering Info
PDF Help

1 00 MHz (Fluke 196C/003) or 200 MHz (Fluke 199C/003) Bandwidths
Increased waveform acquisition memory depth of 3k points per input
Advanced Trigger Function
Frequency Spectrum Analysis using FFT
Advanced waveform mathematics for adding, subtracting and multiplying waveforms
A versus B waveform display for advanced signal analysis
Automatic rise and fall time measurement
Improved Trend Plot scaling
Improved Voltage Readings stability
Pass/Fail testing with reference waveform
2mV sensitivity
Color for easy identification of individual waveforms
Full-size, high-resolution screen for revealing more signal detail
Digital Persistence for analyzing complex dynamic waveforms like on an analog scope
Fast display update rate for seeing dynamic behavior instantaneously
Stop-on-Trigger in ScopeRecord™ mode for storing and analyzing pre-trigger waveform data
Waveform reference for visual comparisons
Vpwm function for motor drive and frequency inverter applications
Up to 200 MHz bandwidth
Up to 2.5 GS/s real time sampling
Connect-and-View™ triggering for an instant stable waveform
Automatic capture and replay of last 100 screens
Isolated inputs (1000 V CAT II/600 V CAT III)
4 hours battery operation

Featured Functions
	With a maximum real-time sampling rate of 2.5 GS/s per input, you can see what really happens, with 400 ps resolution. Both inputs have their own digitizer, so you can simultaneously acquire two waveforms and analyze them with the highest resolution and detail. If an anomaly flashes by on the screen, just press the Replay button to see it again. And thanks to the wider screen, you will always see a 12 divisions time window giving a far better overview of what’s happening both before and after the trigger event!
See what’s really happening
	The waveform memory of all oscilloscopes in both the 190B and 190C Series has been enlarged to allow as many as 3000 samples per channel to be acquired. You can use the ZOOM function to find tiny details in a long waveform, for example, the color burst in a video signal or a single impulse in a complex data-stream. All models also allow the high-resolution waveforms to be transferred to a PC for later detailed analysis using FlukeView® ScopeMeter software.
Deeper waveform acquisition memory
Easier identification of traces, everywhere	The full-color display makes identification of individual waveforms easier, particularly when displaying large amplitude or multiple overlapping wave-forms on screen. On-screen color labels, measurements and warnings are clearly linked to specific waveforms.
	The Digital Persistence mode (Fluke 190C) helps to find anomalies and to analyze complex dynamic signals by showing the waveforms amplitude distribution over time. Digital Persistence uses multiple intensity levels and user selectable decay time—it’s as if you’re looking at the display of an analog, real-time oscilloscope! The fast display update rate that’s standard on all models reveals signal changes instantaneously, useful for instance when making adjustments to a system under test.
See dynamic signal behavior instantaneously
	All 190C color ScopeMeter models now include Frequency Spectrum Analy-sis functionality based on Fast Fourier Transformation (FFT) analysis as a standard feature. This enables you to identify the individual frequency components contained in a signal. The spectrum analysis function is also handy for revealin g the effects of vibration, signal interference or crosstalk. An automatic window function assures optimal window-ing, although you may manually select your preferred time window.
Frequency spectrum analysis
	The ScopeMeter 190 Series simplifies triggering with Connect-and-View™ automatic triggering. Two new modes —“n-cycle triggering” and “dual-slope triggering”—have been added to the Fluke 190C Series to help you isolate the phenomena of interest. N-cycle triggering ensures you get a stable live image of a signal, for example, in-frequency dividers and clocked (synchronous) digital systems, or to synchronize on bursts of pulses. Dual-slope triggering enables the oscilloscopes to trigger on both rising and falling edges alike. This means that any edge in the signal will act as a trigger event and initiate a new waveform acquisition, a most useful capability when making eye-patterns from digital data-streams, or in conjunction with single-shot phenomena. Manual modes include edge, delay, video and pulse width triggering. A fully isolated external trigger input is included for troubleshooting time relationships between two input signals synchronized to a third signal.
Advanced trigger modes
	ScopeMeter 190C and 190B features 30 automatic measurements, cursors, zoom and real-time clock. Now automatic power and Vrms-measurements can be performed on a specific, user identified portion of the waveform using the cursors of the Fluke 190C to define the time-window of inter-est. In this way, the ScopeMeter 190C measures the power within a specified time span, or the rms-value of a volt-age during a dedicated period of time.
Cursor-limited automatic measurement
	“Waveform reference” allows an acquired trace to be stored and designated “reference trace” for visual comparisons, or it can be used as the reference for automatic “Pass/Fail” testing (190C). Up to 100 individually matching (“Pass”) or non-matching (“Fail”) waveforms can be stored in the replay memory, allowing you to monitor your system‘s behavior over a long period of time, without having to be present!
Waveform Pass/Fail Testing
	Scope users know how frustrating it is to see a one-time anomaly flash. Not with the ScopeMeter 190 Series! Now you can look back in time with a touch of the replay button. In normal use, the instru-ment continuously memorizes the last 100 screens. Each time a new screen is acquired, the oldest is discarded. At any moment, you can “freeze” the last 100 screens and scroll through picture-by-picture or replay as a “live” animation. Cursors can be used for further analysis. Use the advanced trigger capabilities to capture up to 100 specific events. Two sets of 100 captured screens with individual time stamps can be stored for later recall or download to a PC.
Automatic capture and replay of 100 screens
	The ScopeMeter 190C and 190B series have three independently floating isolated inputs. While conventional oscilloscopes can only make measurements referenced to the line power ground, measurements on each of the Fluke ScopeMeter 190 series inputs can be referenced to a different “low” level. This enables measurements in mixed circuits having different ground references, and also eliminates the risk of accidental ground short circuits. All inputs are safety certified for measure-ments in 1000 V CAT II and 600 V CAT III environments. And the standard probes cover a wide application range from mV to kV, making the 190C and 190B ScopeMeter ideal for micro electronics to electrical applications.
Measure from mV to kV— fully isolated and safely
	The ScopeRecord memory stores 27,500 points per input or more, for high- resolution recording of events up to 48 hours, and captures fast intermittents and glitches as short as 50 ns. This continuous roll mode stores events like motion profiles, UPS, power supply and motor start-ups. All models also have a “Stop-on-Trigger” in the ScopeRecord mode, allowing the ScopeMeter to store waveform data until the instrument is triggered or until a repetitive trigger signal is interrupted. This way, the instrument will automatically recognize a power failure and store the waveform data preceding it. With 100 x zoom, you can look at the small-est details, like individual power cycles. Two of these 27,500 point recordings can be stored for later analysis.
Deep memory for high-resolution ScopeRecord
	FlukeView Software and the optically isolated interface cable come as separate items, or as part of the special value SCC-Kit. This kit contains: • FlukeView Software (SW90W) • Optically Isolated Interface Cable (for USB) • Protective Hard-Shell Carrying Case (C190 or C120) The SCC-kit can be ordered separately, or with the main instrument by adding an “S” to the main instrument type number, e.g., Fluke 199C/S (see Ordering Information on back cover for more detailed information).
Use TrendPlot to help find intermittents, fast
Connect-and-View triggering for an instant, stable display	Scope users know how difficult trig-gering can be. Incorrect settings show unstable and sometimes incorrect results. The unique Connect-and-View function recognizes signal patterns and automatically sets up correct triggering. It provides a stable, reliable and repeat-able display of virtually any signal, including motor drive and control signals, without touching a button. Signal changes are instantly recog-nized and settings adjusted for a stable display. Benefit from the speed and convenience when measuring a number of test-points in quick succession.

Ordering Information
Model	Description	Buy Online	Price
196C003	100 MHz Color ScopeMeter	Discontinued see: 190102
196C003S	100 MHz Color ScopeMeter with SCC Kit (FlukeView Software, Interface Cable and Hard Case)	Discontinued see: 190102S
Obsolete Models
192C003	Fluke 192C/003 60 MHZ Color Scopemeter	Discontinued See: 190-062
192C003S	Fluke 192C/003S 60 MHz Color ScopeMeter with SCC Kit (FlukeView Software, Interface Cable and Hard Case)	Discontinued See: 190-062S
199C003	Fluke 199C/003 200 MHz Color ScopeMeter	Discontinued See: 190-202
199C003S	Fluke 199C/003S 200 MHz Color ScopeMeter with SCC Kit (FlukeView Software, Interface Cable and Hard Case)	Discontinued See: 190-202S
Factory Refurbished Units
All Refurbished Units are Factory Refurbished with a Factory Warranty. Supplies are Limited!
199C003SU	Fluke 199C/003S 200 MHz Color ScopeMeter with SCC Kit	Please Call
199CM003	Fluke 199CM/003 200 MHZ Medical color Scopemeter, Discontinued	Please Call
Included Accessories
	1 - BC190 Battery Charger/Line Voltage Adapter 1 - BP190 NiMH Battery Pack 1 - VPS200-G Voltage Probe (200 MHz, 10:1), Grey 1 - VPS200-R Voltage Probe (200 MHz, 10:1), Red 1 - TL75 Hard Point Test Lead Set 1 - User manual (CD-ROM) 1 - Getting started booklet "s" Models 196/003s and 199/003s Include SCC190 Kit: Hard-shell Carrying Case C190 OC4USB Optically Isolated RS-232 Adapter/Cable FlukeView for ScopeMeter Windows® software	Included
Optional Accessories
Model	Description	Buy Online	Price
CS20MA	Fluke CS20MA Current Shunt		Sale $69.65 (Reg. $81.95)
Batteries, Chargers & Adapters
BC190808	Fluke BC190/808 Universal 115/230V Battery Charger/Adapter		Sale $99.40 (Reg. $116.95)
BC190813	Fluke BC190/813 120V Battery Charger/Adapter		Sale $78.15 (Reg. $91.95)
BP190	Fluke BP190 NIMH Battery Pack		Sale $127.45 (Reg. $149.95)
Cables & Hardware Cases and Holsters
C190	Fluke C190 Hard Case SM 190 Series		Sale $153.85 (Reg. $170.95)
PAC91	Fluke PAC91 Print Adapter Cable		$281.95
PM9080101	Fluke PM9080/101 Optical to RS232 Interface Adapter		Sale $158.05 (Reg. $185.95)
Current Clamps
I1010	Fluke I1010 ACDC Current Clamp		$350.95
I2000FLEX	Fluke I2000FLEX 2000 Amp Flexible AC Current Clamp		$329.95
I200S	Fluke i200S AC Current Clamp, 20/200 Amp with BNC to banana adapter		$212.95
I410	Fluke i410 AC/DC 400 Amp Current Clamp		$215.95
Enhancements
MA190	Fluke MA190 Scmtr Medical Acc Kit		$350.95
RS200	Fluke RS200 Probe Replacement Set, VP Probes	Discontinued See: RS400
Special Value Kit
SCC190EFG	Fluke SCC190EFG Software Cable and Case		$515.95
Adaptors
PM9081001	Fluke PM9081/001 Dual Banana Plug to Female BNC Adapter		Sale $37.35 (Reg. $43.95)
PM9082001	Fluke PM9082/001 Banana Jack to Male BNC Adapter		Sale $37.35 (Reg. $43.95)
PM9091001	Fluke PM9091/001 Safety Designed Coax Cable		Sale $71.35 (Reg. $83.95)
PM9092001	Fluke PM9092/001 Safety Designed Coax Cable		Sale $62.85 (Reg. $73.95)
PM9093001	Fluke PM9093/001 Safety Designed BNC T-Connector		Sale $44.15 (Reg. $51.95)
SCC190EFG	Fluke SCC190EFG Software Cable and Case		$515.95
TP38	Fluke TP38 Insulated Test Probe		Sale $13.55 (Reg. $15.95)
VPS201	Fluke VPS201 Probe Set	Discontinued
Pressure and Vacuum
PV350	Fluke PV350 Digital Pressure Vacuum Module		$395.95
Software
SW90W	Fluke SW90W FlukeView ScopeMeter Software For the Fluke ScopeMeter 190 & 120 Series		$257.95
Temperature
80T150UA	Fluke 80T-150UA Universal Temperature Probe		$212.95
80TK	Fluke 80TK Thermocouple Conversion Module		Sale $101.95 (Reg. $119.95)
Test Leads, Probes and Clips
AC120	Fluke AC120 Alligator Clips		Sale $27.15 (Reg. $31.95)
AC220	Fluke AC220 SureGrip Alligator Clips		Sale $28.85 (Reg. $33.95)
AC280	Fluke AC280 SureGrip Hook Clips		Sale $25.45 (Reg. $29.95)
AC283	Fluke AC283 SureGrip Pincer Clips		Sale $28.85 (Reg. $33.95)
AS200G	Fluke AS200-G Probe Accessory Set VP Probes	Discontinued see: AS400
AS200R	Fluke AS200-R Probe Accessory Set VP Probes	Discontinued see: AS400
AS400	Fluke AS400 Probe Accessory Kit for the VPS400 Probes		Sale $97.15 (Reg. $107.95)
DP120	Fluke DP120 Differential Probe		$593.95
H900	Fluke H900 Test Lead Holder		Sale $18.85 (Reg. $20.95)
PM9090001	Fluke PM9090/001 Scopemeter Probe Flexible Clip	Discontinued
TL220	Fluke TL220 Suregrip+ Electrical Test Lead Set		Sale $56.05 (Reg. $65.95)
TL224	Fluke TL224 Insulated Test Lead Set		Sale $20.35 (Reg. $23.95)
TL910	Fluke TL910 Test Probes		Sale $45.86 (Reg. $53.95)
TP1	Fluke TP-1 Slim Reach Test Probe		$15.95
TP2	Fluke TP2 Test Probes, Slim-Reach, 2mm Diameter		Sale $13.55 (Reg. $15.95)
TP220	Fluke TP220 Suregrip+ Test Probes		Sale $13.55 (Reg. $15.95)
TP4	Fluke TP4 Slim Reach Test Probe		Sale $13.55 (Reg. $15.95)
TP74	Fluke TP74 Lantern Tip Test Probes		Sale $13.55 (Reg. $15.95)
TP80	Fluke TP80 Electronic Test Probes		Sale $25.45 (Reg. $29.95)
TP912	Fluke TP912 Replacement Tips		Sale $22.05 (Reg. $25.95)
TP920	Fluke TP920 Test Probe Adapter Kit		Sale $28.85 (Reg. $33.95)