-
Three Views of each reading:
- Waveform
- Bargraph showing harmonic levels
- Numeric values
- Real-time Display Updates
Display updates three times a second for a dynamic view of actual circuit conditions
- Comprehensive Measurements
Measure rms, peak and total harmonic distortion (THD) for complex voltages and currents -
with no manual calculations required
- Three-Phase readings
From a simple single-phase measurement, automatically calculates three-phase power for
3-wire balanced loads (typically 5% or less imbalance).
- System Critical Data
Immediate readings of Power Factors, KVAR, Crest Factor, K-Factor
- Display Harmonics individually to the 31st
- Min/Max and Average recording
- Data Storage of up to eight complete measurement sets
(Fluke 41B)
- Isolated Serial Interface for communications with a serial
printer or DOS or Windows-compatible computer (Fluke 41B)
-
Safety Designed to meet the latest standards: ICE 1010-1,
pollution degree 2, Installation Category III, material group II, 600V. Double insulated
protection as described in ICE 1010-1, Annex H.
The
Fluke 41B Harmonics Analyzer combines the ease of use of a digital multimeter,
the visual feedback of an oscilloscope and the power of a harmonics analyzer in
a single instrument. If you're testing power on three-phase systems or
trouble-shooting harmonics on non-linear loads, no test tool makes it easier.
The Model 41B is ideal for further analyzing
data and optimizing system performance. Use the Fluke 41B's FlukeView®
software (included) to download acquired data to a printer or an MS-DOS®
or Windows® compatible computer for analysis and
presentation.
Features |
| Direct 3Ø readout from simple single-phase
measurement |
Phase angle of fundamental and harmonics |
| True-rms. voltage from 5.0V to 600V |
Waveform and spectrum displays |
| True-rms. current from 1A to 500A (1000A
with optional probe) |
Record mode - MIN, MAX and AVG. |
| Peak, DC, and Crest Factor |
Zoom mode |
| Total harmonic distortion (% THAD and %
THIRD) |
48-hour battery life (4 "C" cells) |
| Active power from 10W
to 300kW (600kW
with optional probe) |
Handheld, 1 kg (2 lbs.) |
| Apparent power (kV) |
Surge protection, 6kV per ICE 1010-1 CAT
III - 600V |
| Total power factor (HF) |
Marks - CE, CSANRTL/C,
TUV/GS |
| Displacement power factor (DPI) |
Includes 500A current clamp and video |
| K-factor |
Memory for 8 complete data sets |
| Frequency from 6Hz -99.9Hz (fundamental) |
Optically isolated RS-232 interface |
| Harmonics to 31st |
FlukeView® PC software for Windows® and DOS included |
|
