|HOME > FLUKE > POWERMETER > 1730|
Fluke 1730 Three-Phase Electrical Energy Logger with Touchscreen
Fluke 1730 Shown
The Fluke 1730 Three-Phase Electrical Energy logger introduces a new simplicity to discovering sources of electrical energy waste. Discover when and where energy in your facility is being consumed; from the service entrance to individual circuits. Profiling energy usage across your facility helps you identify opportunities for energy savings, and provides you with the data you need to act on them. The Fluke 1730 Energy Analyzer software package allows you to compare multiple data points over time to build a complete picture of energy usage, which is the first step to reduce the cost of your energy bill.
Load studies Discover how much energy individual pieces of equipment are consuming when they are operating at minimum and maximum capacity. Check capacity of circuits prior to adding additional loads (various standards exist for this process; in the US the NEC 220-87 is the recommended standard). Load studies can also identify situations where you may be exceeding the allowable load on the circuit or when an agreed peak demand applies from the utility. For convenience, some load studies simply measure current which makes installation of the measuring equipment quick and easy. It is often recommended that load surveys be performed for 30 days so that all typical load conditions are encountered during the test.
To capture a full picture of the facilities energy usage it is not necessarily required to have measurements made with the Fluke 1730 simultaneously at every consumption point in the facility. To get a comprehensive picture, spot measurements can be made and then compared on a sliding time timescale. For example, you could compare the service entrance results from a typical Tuesday between 6:00 am and 12:00 pm with those of a larger load in the facility. Typically there will be some correlation between these profiles.
Power and energy logging
Simplified load studies
||Fluke 1730/US Three-Phase Electrical Energy Logger with Touchscreen||$2,999.99|
||Fluke 1730/BASIC Three-Phase Electrical Energy Logger with Touchscreen (No current probes)||$2,699.99|
||Fluke BP1730 3.7V, 2500 mAh Li Ion Rechargeable Battery Pack||Sale $42.49
||Fluke 3PHVL-1730 3-Phase + Neutral Voltage Test Lead Cable Assembly||Sale $87.95
||Fluke TL01M .10M Silicone Test Lead Set, 1000V CAT III, .10M, Straight Plug (Red/Black)||Sale $33.99
||Fluke TL2M Test Lead Set; 1000V CAT III; Straight Plug; 2M; PVC (Red/Black)||Sale $25.49
||Fluke I40S-EL/3PK 40A Clamp-on Current Transformer, 3 Pack||Sale $629.99
||Fluke I1730-FLEX3000 3000A 24 inch iFlex Current Clamp||Sale $175.99
||Fluke I173X-FLEX3000/3PK iFlexi Current Clamp, 24 in. Circumference, 3000A, 3-Pack||Sale $449.99
|Cases and Holsters|
||Fluke 1730-HANGER Hanger Strap Kit for the Fluke 1730||Sale $57.39