The Fluke 1750-TF/ET Three-Phase Power Recorder with Flexible Current Probes and Windows Tablet captures every measurement, every event, on every cycle, all the time. Outstanding accuracy and resolution provide complete visibility into your installation or distribution system.

Easy to Use

The recorder automatically detects, scales, and powers current probes without needing batteries or external power supplies. Requiring only single-lead voltage connections enables safe and quick setups. Once power is applied the instrument automatically begins recording and LEDs give you assurance that the recorder is powered up and signals are within range—no more uncertainty that data is being recorded. The Fluke 1750-TF/ET has an exclusive capture algorithm which makes certain that all events are captured without the tedious setups and blind spots associated with threshold driven equipment.

The Windows tablet interfaces via Ethernet cable to the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams. Analysis can be performed in the field using the Fluke Power Analyze software running on the Windows tablet (laptops can also be used when desired).

Comprehensive Power System Data

Every cycle on every channel is simultaneously sampled providing complete analysis of power quality, harmonics, power and energy. Cross-channel current and voltage triggering captures event data on all input channels simultaneously, no matter which channel triggered the event. When periodic analysis of the waveform may be needed, the Snapshot mode captures waveforms at user-defined intervals. Even DC signals can be recorded.

Powerful Data Management

Data is automatically stored on the internal flash memory that can store records for over a month without

compression or overwriting. Data is retrieved via one of two quick and easy options: download the data

onto the included SD memory card without using your laptop, or transfer directly to your computer via Ethernet, using TCP/IP protocol.

Voice, data, and picture annotations can be made via the tablet to flag important points in the data

stream. Imagine being able to flag in your recorded data when a transfer switch is operated, or load

changes are made.

All of the Latest Power Quality Standards Built-in

IEC 61000-4-30 compliant measurement systems provide the confidence that all parameters are measured and calculated consistently with international standards. Automated EN50160 compliance reporting allows for rapid Pass/Fail testing.

600 V CAT IV and 1000 V CAT III Safety Rating

Designed to help protect you and your equipment, the Fluke 1750-TF/ET Three-Phase Power Recorder and accessories are all certified to meet the stringent safety standards for use in 600 V CAT IV and 1000 V CAT III environments. They are the first tools of their kind to carry the CAT IV rating and can therefore be used for most power connections and for all outlets in a low-voltage power distribution systems.

View Data the Way You Want

The new Fluke Power Analyze software revolutionizes your ability to analyze data. There is no need to worry about thresholds—with Fluke Power Analyze, thresholds can be modified after the data is recorded. The easy-to-use user interface will display voltage as a phase-to-phase or phase-to-neutral reading. And the Widows tablet runs the full Power Analyzer software for easy, in-field analysis.